KW3AT-16 Microwave Oven Door Switch 16A 125/250V Door Interloc for KW3A, KW3A-16 (2 Open and 1 Closed)

Replaced my old KW3AT switch on my Toshiba Microwave. Switch seems sturdier and is rated for higher Temps. Please learn to discharge the capacitor before doing any service work. Double check with a multimeter.Besides that it works great, taped the extra on the back of the microwave in case I need to do so again.The switch that I replaced, broke was the top one which engages the safety to make sure the magnetron doesn't kick on if the door is open. Otherwise it'd run but you could see the magnetron would stay off and not heat up food.

Product is good and has been functioning properly for months with no issues. I checked a YouTube on how to switch it and frankly it was very easy to install and the fit was perfect. The durability has been good as well and the value for the money is good as well. The switch functions great and the speed is great as well, it does its job. I don’t often use the microwave but the times I have, there has been no issues.

Used a YouTube video to learn how replace the switches. Worked perfectly.

These switches worked great for my microwave. However, the main issue was really the plastic latch that they fit into, as it was worn and if the microwave was opened while it was running the microwave would trip the circuit breaker. Just replacing the fuse made the microwave work (as a switch had failed, seemingly from the "abuse" by the magnetron shorting because of the worn latch) but didn't fix the problem with tripping the breaker. However, once I replaced the latch everything works great now.

The switches were a direct replacement for the ones installed in the microwave. I only had one bad switch but went ahead and replaced all three. Good price much cheaper than an appliance repair store.

Didn’t quite work for what I needed but got a quick refund and no problems

Failed within 5 months. Microwave use is heavy in my household, plus the door flexes as well. YMMV

Have a 20 year old Sharp. Fixed once already with a new RF window (started arcing across the grime buildup). This time it was a door switch. The unit has two NO switches and one NC. There was an internal placard recommending the NC (monitor) switch be replace during repair (series D3V). However, the OEM parts were V-5220Q (NC) and V-5230Q (NO). While I found the OEM parts on Amazon, I could not find a combine set. I came across the KW3AT-16 set here and found that electrically they matched the OEM. Fortunately, the website displayed the physical dimensions. After taking a micrometer to the OEM, I found that they were pretty much the same. They snapped into place nicely. The only difference I found was the contacts for the spade terminals were .030" thick on the KW3AT and the OEM were only .020" thick. I was still able to push the spade terminals on, but a very tight fit. Hopefully I will be able to update the review in the future as to the durability.

Good product

Los ocupé para reparar mi horno y funcionaron Perfecto. Mi horno abría la puerta y se encendía . Ahora ya quedó solucionado

Productos de buena calidad, cumplen con lo prometido (2 microswitches "abiertos" y uno "cerrado". Llegaron en tiempo. Ya instalados en miroondas y trabajando nuevamente. Buen precio. Recomiendo ampliamente.