BRCOVAN Anti-Theft Motorcycle Phone Mount Holder with Vibration Dampener | with Secure Lock, Adjustable Size Handlebar Cellphone Cradle for Bike Bicycle Scooter ATV, Fit 5.4 - 7.2'' Smartphones

I've been using this phone mount all year, and I commute around 100 miles a day. It's rugged and holds my phone very tightly, even without tightening up the thumbscrew. The springs in it are strong enough to where two hands are required to place the phone into the mount and remove it. I'd previously had another name brand X-mount, which worked well, but the little rubber tips kept wearing out and popping off. Also, one of the tips would push buttons on the side of my phone if I didn't position it carefully. The BRCOVAN is very adjustable, and I don't have issues with button pushing. The charging port is easily accessible. This phone holder is shock mounted, which is supposed to isolate the phone from vibration. I don't have a ton of vibration on either of my bikes, but I suppose there may be some that do. The construction of the mount is plastic, but it seems well made and should hold up well. The 'anti-theft' features (tamper-resistant Torx fasteners) fall under the "keeps honest people honest" category. I like it well enough to where I'm thinking about getting the fancier aluminum version for another of my bikes

I bought this BRCOVAN Phone Mount for my 2010 Harley-Davidson Street Glide, and it is an exceptional piece of gear. It is incredibly easy to use and provides a flawless fit for my massive iPhone 17 Pro Max, clipping it in securely with zero hassle.The phone hold is unmatched. Its rugged grip locks the device into place, and the specialized vibration dampener brings maximum steadiness to your screen, protecting your phone's camera stabilizers from heavy V-twin rumble. I have logged 75 miles with it so far, and the high-speed lock keeps everything completely immovable on the highway. I will keep you updated as I roll on more miles, but this is a solid 5-star investment! The only negative which I wouldn’t minus a star for is I wish it add a little bit more range of motion.

I'm blown away by the quality of this product and the value. It is made of alloy overmolded with a grippy rubber like material on all areas that will contact a phone. The springs on the main clamp hold the phone VERY securely, and it has a lot of adjustable range. In addition, the side pins are adjustable for different width phones. They are fastened by screws so that you set them once, and you're done. On my Pixel 10 Pro, one of the pins does cover the down volume button. While adjustable for width, you cannot adjust them along the long edge of a phone. As stated in the instructions, you are meant to leave a small gap between the pins and the long edges of the phone. I used a business card as a shim, and set them that way. These pins are an additional piece of security as the main clamp is strong enough to hold the phone securely all alone. The bracket comes with multiple round shims for a variety of mounting bracket and handlebar sizes, and it also includes a mirror post mount. The clamp balls are coated in a soft, sticky material that allows the main clamp to grip very securely. I am confident that with these accessories that most any mounting situation can be accommodated. Once mounted, this thing isn't going anywhere. A rubber interface between the clamp and holder body does a decent job of absorbing high and medium frequency vibrations. As described, key fasteners are Torx anti-tamper screws. The kit comes with the necessary tools. For me; these will live in one of the small zip loc bags that come with it, and they'll be hidden in a pocket in my tank bag. All in all this is a great piece of equipment. It will be holding my phone for navigation on an upcoming trip around the Italian and Swiss Alps.

Easy to install. The vibration dampener works well. The claw grip is fantastic, I have zero fears that my phone will eject. Solid build quality. I have a fairly large phone and it still fits no problem. Very pleased especially for the price.

**Near the bottom of this review is a PRO INSTALLATION TIP** FIRST, the "unimportant stuff" - I have purchased 6 or 7 phone holders from different brands for my motorbike. Only one of them was good enough to be used on my bike for over 3 years. I'm changing my OEM mirrors on my motorbike to bar end mirrors. The last phone holder was installed with an L bracket directly under the mirror bolt. Although this phone holder is sold by BRCOVAN, The actual brand name is KEWIG. NOW, the important stuff" - "THE GOOD" - The packaging is very good. Everything is separated and doesn't come in one big bag like the inferior brands. As soon as I picked up the main body of the phone holder, it did feel pretty heavy, and very durable. Although it is made of plastic, like pretty much everything today, the plastic is a lot harder, a lot more dense than any other brand I've tried in the past. The handlebar installation was pretty simple and quick. All of the rubber inserts have raised edges that help align the handlebar insert with the bracket. Something I have never seen before. The insert and bracket themselves once installed do not move at all. The instructions are pretty clear. Not only do you get photo instructions, but you also get worded instructions. You will need a Phillips head screwdriver to adjust the side and lower grips on the main body of the phone holder. The grips themselves are made of rubber / silicone and are nice and soft. We will see how everything holds up in Florida weather. I only own a motorcycle, so I ride it every single day. Rain or shine. Installing the main body of the phone holder to the double socket arm was very difficult. Inserting one of the balls into the double socket arm was pretty easy. But once you have one ball inserted, the screw inside the twist lock on the double socket arm acts like a fulcrum. So the opposite end of the socket arm will close up a little bit. So don't waste your time trying to shove both balls into the double socket arm, until you read below. **PRO INSTALLATION TIP** There is an "anti-theft screw" on the double socket arm. Take this screw out completely. Then you can actually unscrew the twist lock a little more. Allowing both balls to be inserted into that double socket arm very easily. I have a Galaxy S24 Ultra with an OtterBox Commuter series phone case. The phone with the case is pretty thick, but it does fit very nicely with a little extra space all around. And the telescopic rods on top do hold the phone very securely. They do feel well-built. Also, there is a high speed secure twist lock on the top back of the phone holder near the telescoping rods. But honestly, I don't think you will ever use it. That's how secure my phone feels when inserted. The face of the KEWIG phone holder also has soft rubber / silicone panels. And they do feel really really nice. "THE BAD". Once you get the phone holder completely installed, inserting or retrieving your phone IS NOT a "quick one-handed access" as the product information states. If you do not hold the double socket arm when inserting or retrieving your phone, the positioning of the phone holder WILL MOVE. Even if it is just a little bit. But that really is a small thing to me, seeing how well made this phone holder is. Because most phones today do have two columns of camera lenses on the back of the phone, 1 telescopic rod will cover the innermost lenses on your phone. But for me, that really is not a big deal. Now for the vibration dampening. It is only marginally better. That's all I can say. But I don't really use my phone's video camera when I'm riding. So again, no big deal for me. All in all, I wished Amazon would allow us to give 1/2 stars, so I could give the KEWIG phone holder 4.5 stars. But since they don't, I will have to settle on 4 stars. If KEWIG could do a redesign of the double socket arm so it doesn't move and actually allow for a "quick one-handed access" and allow no blockage of some of the rear camera lenses on today's phones... This phone holder would no doubt be 5 stars from me.

Fits my larger phone well, vibration dampening is obvious, sturdy and straight forward use. Good price. No concern of my phone falling out.

I wanted the aluminum phone holder, but this one filled all the gaps and doubts, super sturdy polyamide and glass fiber structure feels high quality plastic, very resistant, feels a bit heavy too (not a dealbreaker since the components are durable stainless steel bars), phone is very secure, after you insert it you turn a back round knob and the spring/latch is not opening, I liked that comes with a mirror adapter if you dont use those holes or adapt it on the bottom of the mirror screw. Depending on the phone I liked that this one, the camera is usable since its aperture allows it to (unlike the Lamicall brand), so works as a dash cam as well. Overall happy with the results (this arrived fast). I used it with a Galaxy Note 10 plus with a transparent cover and it still has space for more (a Galaxy S25 ultra with an otterbox chunky cover also fits so you get the idea) you just have to open the side holders with a phillips screw driver and secure them at the end to the desired fit. Ease of installation and comes with a manual as well. I used the 24.5mm rubber band it comes with 4 with different measures, I used it in a Honda CB300f Twister 2025, wanted to upload 2 videos but amazon only allows 1 per review. Highly recommend it.

Works great, high quality, fair price I don’t think you can go wrong. I have mounted to my 2010 Harley Road King and it barely vibrates. I have had other, more expensive phone holders that didn’t measure up to this one.

Diminui em mais de 90% a vibração, permitindo até uma filmagem por ele. Super recomendo.

Als Motorradfahrer und Tourenfahrer war mir besonders wichtig, mein Smartphone sicher und vibrationsgeschützt am Lenker zu befestigen. Nach mehreren Fahrten auf meiner Triumph Tiger kann ich sagen: Diese Halterung hat mich absolut überzeugt. Bereits beim Auspacken macht die Halterung einen hochwertigen und robusten Eindruck. Die Materialien wirken langlebig und sauber verarbeitet. Besonders hervorheben möchte ich die einfache Installation. Die Montage am Lenker war unkompliziert, alle benötigten Teile waren dabei und innerhalb weniger Minuten war die Halterung einsatzbereit, auch ohne besonderes technisches Geschick. Der integrierte Vibrationsdämpfer war für mich ein wichtiges Kaufargument, da moderne Smartphones empfindlich auf dauerhafte Vibrationen reagieren können. Auch auf schlechteren Straßen, bei höheren Geschwindigkeiten und während längerer Touren blieb mein Smartphone jederzeit sicher an seinem Platz. Sehr gut gefällt mir außerdem die flexible Verstellbarkeit. Das Handy lässt sich optimal ausrichten und bleibt auch bei Sonneneinstrahlung gut ablesbar. Die Verriegelung wirkt zuverlässig und vermittelt ein sicheres Gefühl. Was mir persönlich besonders gefällt: Man fährt einfach los und macht sich keine Gedanken mehr um das Smartphone. Gerade auf längeren Touren ist das ein echter Komfortgewinn. Fazit: Eine hochwertige, stabile und durchdachte Motorrad-Handyhalterung mit einfacher Montage und wirksamem Vibrationsschutz. Für mich ein sehr gelungenes Produkt mit einem ausgezeichneten Preis-Leistungs-Verhältnis. Klare Kaufempfehlung!

Recommend.

Using this product with Galaxy Fold 5, and it is great, the phone is secured while folded, and also made of a very good material and quality I recommend it for others

Esta perfecto Muy buen material tomando en cuenta que es nuevo Solo hay que ver si aguanta el sol y la lluvia por qué los colchonsitos que tiene para amortiguar son muy delgados pero por lo pronto está todo perfecto