NADAMOO White Tub and Tile Spray Paint, DIY Refinishing Aerosol, 4 Can

I used 3 out of the 4 cans and each can was one coat for the entire bath+walls. I made sure to follow the preparation steps and did a light sanding over the entire surface and made sure everything was dry and free of debris before I started spraying. I shook each can about 2 minutes before spraying. I kept a distance of no less than about 9" from the surface and kept the can moving. I also waited about 20min between each coat. I didnt see any globs or paint running and overall, it went on pretty uniform. ALSO, I'm in a very dry state, but I think if you live in a HUMID area, this might not work. I think the surface and air have to be dry because the paint won't dry and harden properly if there's any moisture... That's just my 2 cents. Definitely not a permanent solution for an old shower but will do for the short term.

Wish I could leave zero stars. Terrible strong odor, and made my bathroom tiles look worse than they were before. The spray only leaked and did not provide any coverage. It's outside of the return window now so I just wasted $60 on this awful product.

I used this on a good old toilet that I did not want to remove or replace during a remodel. So I painted it in-place as it was, tucked inside a little cubby hole set back in the bathroom wall. I had a widow open and an exhaust fan, but could not keep the overspray moving fast enough. For that reason, and also because white is hard to see, it was tough to not get any dry areas or drippy areas. But it worked ok. After that, I used it on all the ceramic towel bar holders, built in soap dish and tp dispenser, because those would be hard to make look nice with a roller or brush. In the end, the color was a bit cooler than the paint I used on the walls, but the finish is very nice, has good gloss and seems durable enough. Took about 5 cans for what I did. It was a lousy job to do, but the product worked pretty good overall.

Coats well. Sand smoothly. I reccomend pre sanding before application.

Works good . I just think that is a little bit over priced