Screen Protector for Onyx Boox Page/Boox Go Color 7 Black/Leaf 3 Light Anti Glare Paper Texture Feeling Matte Film- AG Light Paper Page

This screen protector is AMAZING! It has an amazing texture, is fingerprint and scratch resistant, cuts down on glare. It gives my e-ink reader a closer to physical book feel. My only complaint is the instructions. They aren’t very clear. The English bits are very small, the labels aren’t very clear, the video they sent doesn’t help. It’s more of a general ‘how to put A screen protector on’ rather than ‘how to put THIS screen protector on’. You also only get one, some other brands I’ve seen come with more than one, which leaves you with a back up in case you mess up. I had to google and find a video of someone putting it on a similar device from the same manufacturer of my device, and they also said the instructions leave much to be desired. But I took my time and applied it without issue (and this was the first screen protector I’ve ever applied personally). I almost want to take a star away for the really poor instructions but as I got good results even with my lack of experience, I’ll chalk that up to it being easy to apply if even I can do it. And to be fair, my device is fairly new to the market. My e-reader is not a stylus compatible model, but this screen protector makes me want to upgrade to one. If I do, I will definitely be ordering this again. I didn’t want to go the e-reader route because I love physical books, but circumstances left me with little choice. I went with e-ink to keep a closer to paper experience and have had a favorable experience with mine. This increased that experience a lot and brought me even closer to paper. I’ve found using my device more pleasurable than before the screen protector. I highly recommend buying this if you are a tactile kind of person. It’s very worth it.

This screen protector is great! Like some other reviews said, I do wish this had a second screen protector in case you mess up the first one, but I managed to get it near-perfect! I figured out how I'd need to place it to fit around the physical buttons before removing the layer covering the sticky side, then wiped down the screen with the included wipe, went over the entire screen with the dust remover, and then went for it, and at first I did get two small bubbles in the middle (air, not dust), but carefully lifting one corner and pulling it back to where the bubbles were and using the smoothing tool to carefully smooth the bubbles out while lowering it worked! There are only some tiiiiny specs of dust near the edges left, and they don't bother me. I included a photo pointing out the dust specs - any other dust that seems to be there is my camera doing way too good a job at catching the dust on top of the screen protector - I can't even see most of that in person! Anyway, I'm very pleased with this screen protector and will order again if I need to replace it in the future.

I purchased this for the black version of the "Onyx Boox Go Color 7" eReader. After using the included screen cleaner and drying with a micro fiber cloth I removed the #1 sticker on the protector and carefully placed it down. Once it was in place there were bubbles. I tried using the included "Dust Remover" to push it flat, but it became apparent that the reason for the bubbles was because dust from the air got on it. I then had to lift it up by a corner to try to remove them, but the dust wasn't on the screen itself. It was on the protector. Try as I might I could not remove them. I was able to remove most of them though. Worse is that the corner I had to lift in order to remove bubbles lost all adhesiveness. I've installed screen protectors before and it's fairly obvious that there's less adhesive on this than other products I've used in the past. With other products in a situation like this I'd be able to lift up a corer, remove the dust, and set it back down, but because the adhesive on this is weak the end result is that it can't be placed back down. In short, using this requires that you have a second one on hand to use if the first one gets any dust at all from the air on it because if you end up with any bubbles that cannot be pushed out you won't be able to peel it up and expect it to fully apply afterwards. I'll be buying a different screen protector to replace it. Maybe one made of actual glass. It's a shame because I really do like the feeling of paper touch that this screen protector has. If only the adhesive quality was just a little be better or if they included a backup cover in the event of failure to apply this could have been perfect.

This only fits the black version not the white one. I didn’t feel like sending it back as there’s no replacement for it at this moment and I’m heading out of the country in a few days so I measured and cut to fit and I’m so glad I did. It’s a matte protector so it feels like an actual page from a book which is something I love and no glares. I’m ok with it!

If you've installed tons of screen protectors over the years - this should be no different. Worked well for me. I repositioned it a few times before committing all the way, but the key is to be fairly decisive about it - the more you wait while the sticker is 'exposed' - the more dust you'll attract. Use the included squeegee when it's aligned and you'll have no bubbles. The anti-glare / matte feel is good - I'm using it with a compatible third party stylus and it makes the feel a lot more scratchy like paper (maybe a bit too scratchy feeling, you almost feel like you're wearing down your nib, but it's not). Definitely improves texture for writing, and the stylus still works fine.

The good: one of the easiest to apply screen protectors I've used that doesn't come with an alignment tool. The bad: Not even slightly anti-glare, in fact it has WAY more glare the screen it's protecting. It has so much glare that any tiny scratch is extremely visible. It's definitely not matte, and I have no idea what it means by "paper texture feeling" as it feels the same as any other screen protector I've used. I would not recommend.

It applies just fine, it works it protects the device. The problem is that because of the paper like texture it makes the color e ink look even fuzzier and the extra barrier it makes me have to push harder on the device to get it to register my touch. I left it on for almost 2 months and decided I couldn't handle the extra fuzziness and the decrease in touch sensitivity. Why is it paperlike in texture. This device does not need a paperlike texture.

Great anti glare screen protector. I really like the textured finish, has a rough paper feel. There is only one screen protector in the pack so I was nervous about the install, but the install went perfect. The few bubbles after the install, I was able to squeeze out with the included tool. I read some of the other reviews and they state the screen protector does not fit properly, but mine fit perfectly. I have the Boox Page 7.

Excellent! Looks confusing but actually very simple, sandy texture but I actually like it ahah, high quality but only one so be cautious with it! 10/10

Would love to give 5 stars for this as it appears to be good quality but it arrived bent & had bubbles even before I could apply it because it was only in a bag with nothing to keep it flat to travel to the other side of the world! Despite this, if it had arrived intact it looks like it would be a great screen protector as it was easy to apply & the only flaws/bubbles it had once applied were the ones it already had from the crap packaging. So 5 stars for the product, 0 stars for the packaging & shipping!

Definitely matte and paper texture... As sandpaper. It's quite rough feeling which is distinctively different to the smooth feeling of the original screen. I had to take it off after a few hours of use. It's quite a shame because otherwise this screen protector is a good quality item!