2-Pack 1FT 1/4 Inch Right Angle TS Male to 1/4 Inch TS Female Adapter, 6.35mm 1/4" Mono Connector for Bottom Plug and Front Facing Jack Guitar

I got the HUALEU 6FT 6.35mm Right Angle TS Male to 6.35mm 1/4 Inch TS Female Cable. I am using mine for an electric guitar headphone amplifier. Normally, you have to plug these directly into the guitar output jack. Using this cable, I can set the amp on a desk where I can see/adjust the controls more easily. It also helps prevent breaking the amplifier, especially when the guitar output jack is mounted to the side of the body where it could bump into something by accident easily. The cable works as expected and is of good quality.

Decent Quality Product, perfect for my needs, using it with a Peterson tuner peddle, no problems so for ,time will tell.

These were good.They suited my needs for giving some extra length and providing some slack on a pair of cables.

Great cable for extending my small amp device

This product solved the exact problem I had and I use it on every gig, but it's easier to break than I would like. I use it with a little pouch on my strap to hold a wireless receive and make this extender the connection point on my guitar. Works great, fits a tele recessed jack just fine, but I did break the jacket on one of these but pulling a cable out of it too hard.

Excellent cable, low price. Very well made, looks durable. Clean sound. The first one I got had a bad connection in the socket, so the signal was intermittent, but judging by the look of the cable I knew it was good and I had just received a faulty one. I was right, because the replacement is excellent and I am convinced this is the best deal available on a quality cable. The item was replaced promptly. The plug ends are reinforced with metal and there is a fine fabric casing on the cord. Looks nice, and you could just about tow a car with it. Highly recommended.

Good application for what I needed

I use this between the output on my bass and a wireless transmitter. Could the transmitter just plug into the instrument? Sure, and that's how I used to run it. I didn't like how it stuck out, and would be subject to pressure when I set the bass in a guitar stand. This cable is much lower profile and allows me to strap the wireless transmitter to my guitar strap. So, it is visually less intrusive and there is less impact risk. The male end fits snug into my bass and the transmitter is almost tight, it's so snug. If anything, it might be too snug as I need to pull a little harder than I'd expect to separate them. The cable seems to add no noise. I used this set up at a jam last night (without a noise gate in the signal chain) and there was nothing in the signal when I had the strings muffled. Curious, I turned the gain way up on the amp, and it was silent. I would buy again, but I only needed one. So, if it fails, I guess I already have a backup, since these sell in pairs.

These are very well built, prevents reaching to plug were a Straight Style 1/4 plug, very useful. I want to contact seller for full list of products.

This is a well-made cable with a very good finish. The female connector looks to be moulded, and I could not look at the internal construction. TH male connector is soldered, with heat shrink over the cables inside the connector to protect them. The connections are firm, and the male connector is straight without any bumps, so the insertion is smooth and easy without anything that can get jammed inside your devices.

I recently acquired the HUALEU 2-Pack 3.3Ft 1/4 Inch Right Angle TS Male to 1/4 Inch TS Female Adapter Cables and have been thoroughly evaluating their performance and build quality. Upon inspection, the overall construction of these cables appears quite robust. The right-angle connector is particularly well-designed and repairable, which is a significant advantage for longevity and maintenance. Unfortunately, the other end of the cable does not seem to be repairable, which could be a limitation for some users who prefer to be able to fix their own gear. The soldering quality is generally good. The connections are solid, which is crucial for maintaining signal integrity and ensuring the cables perform reliably over time. However, I did notice a lack of shrink wrap on the internal connections. While this may not pose an immediate issue, as the solder joints themselves seem secure, shrink wrap is an additional safeguard I typically use in my custom cable builds. It helps prevent any accidental grounding out if the connector gets bent or stressed, providing an extra layer of protection. Given my experience in making my own cables, I tend to be quite particular about these details. I like to ensure all internal connections are shrink-wrapped to prevent any potential shorts or grounding issues. While the absence of shrink wrap in these cables is not a deal-breaker and shouldn't cause significant problems, it is a detail that could enhance the overall durability and reliability of the product. In terms of performance, these cables have met my expectations. The quality is quite good, with clear signal transmission and minimal interference. They are a solid choice for anyone looking for pre-made adapter cables that can handle regular use. In conclusion, the HUALEU 2-Pack 3.3Ft 1/4 Inch Right Angle TS Male to 1/4 Inch TS Female Adapter Cables are well-built and reliable. The repairable right-angle connector is a nice feature, and the overall soldering quality is commendable. Although I would have preferred to see shrink wrap on the internal connections for added security, the cables still perform well and should serve most users' needs effectively. If you're looking for a high-quality, ready-made cable solution, these are a good option, though not entirely perfect.

I found these cables while looking for a solution for my guitar wireless that has straight plugs when my guitars all have bottom jacks that work a lot better with 90 degree plugs. These simple cables solved my problem. They are quality cables, solid workmanship and the jacks are a nice tight fit. I never worry about losing connection.

Great for instrument pedalboards where you don't have easy access to the back of a pedal. Just leave these plugged in dangling out back or side to plug in longer cables.