Creality PLA 3D Printer Filament, Black & Grey, 2-Pack, 2KG Total

I bought the Creality 2kg Black & White PLA 1.75mm Filament Bundle because I wanted two basic colors that I could use for just about anything without constantly ordering more filament. So far, it's been a great everyday PLA bundle. Pros: 2kg bundle gives you plenty of filament for the money Having both black and white covers a surprising number of projects Filament feeds smoothly and has been easy to print with Good layer adhesion and clean-looking finished prints 1.75mm size works with a wide variety of compatible 3D printers Great value for prototypes, functional parts, school projects, and everyday printing Spools have held up well during regular use without giving me trouble Cons: Black and white aren't very exciting if you're looking for colorful decorative prints Like any filament, careful storage is important once the package is opened Two full spools take up a decent amount of storage space Personal Story: I originally bought this bundle because I kept running out of the basic colors right in the middle of projects. Of course, the printer always seems to run out at the most inconvenient possible moment. I've used the black for practical parts and little replacement pieces around the house, while the white has been great when I want to see details clearly or plan on painting the finished print. I was especially happy that I didn't have to spend a bunch of time tweaking settings just to get decent results. I loaded it, got the printer dialed in, and started making parts. After going through a good amount of both spools, the filament has remained consistent and dependable. That's really what I want from everyday PLA — fewer filament-related adventures and more actual printing. Overall: This is a great bundle if you do a lot of 3D printing and want dependable basic filament at a reasonable price. The black-and-white combination is practical, the print quality has been consistent, and having 2kg on hand means I'm not constantly worrying about my next spool. Easy five stars for me.

Got for Bambu A1 mini. Great price and kid uses roll after roll of filament. No issues with printing, were packaged great and kid has already gone through all of it. Prints looks great and the quality is on par. I guess I will be ordering more!

This is exactly what you want from budget PLA - it does its job without making your life difficult. Been running this through my Ender 3 and honestly, as long as you stick to the recommended temps (I found sweet spot around 200°C with 60°C bed), it prints like butter. No stringing issues, no random clogs, just clean prints time after time. The black is properly black - not that weird semi-transparent dark gray you sometimes get with cheaper filaments. Layer adhesion is solid; I've dropped a few prints and they don't shatter like glass like some other budget PLAs. You might get occasional popping from moisture if you store it poorly, but that's on you, not the filament. Only reason it's not getting 5 stars is because it's not quite as forgiving as premium brands if your settings are off. Bridging is good-not-great, and you might need to dial back speed on overhangs. But let's be real - at this price point, for basic functional prints or prototypes, it's hard to complain. It's become my go-to for when I need to print a bunch of parts and don't want to burn through my expensive stuff.​​​​​​​​​​​​​​​​

The amount of filament that comes on these two rolls is absolutely amazing. I previously purchased some other filament that are primary colors and there is not near as much on those rolls and I believe I paid more for those rolls than these two rolls combine. So black-and-white are definitely colors. You use a lot in 3-D printing. This is a great deal and the filament is top quality.

Fine filament, but the rainbow colors are just purple, blue, green and pink. Makes for some cute prints but not what I was hoping for.

Hey guys, I have to say that this has been my first ever purchase of Filament and the beginning of my 3D printing journey. I bought this set of filament from this seller and have to say from the way they do business and the way they communicate is amazing. I used both filaments I purchased and noticed I was having issues with my white filament which kept failing and couldn’t understand why. I thought it was me but then tried the black one with the same bed level and setting and I was getting amazing print with no issues. Come to find out the white filament wasn’t good and nothing to blame the seller for, but filament gains moisture in which causes printing issues or even snapping while going through the feeder. I reported this to the seller and with no questions asked after messaging them and sending images of my issues they were very professional in sending me not only a replacement at no charge but they send me another combo pack which included the white and a grey which I haven’t tried yet. But it’s businesses like this that make my shopping comfortable and secure. But back to the product it is great with no complaints and I highly recommend with no worries.

This filament does not stick well with the A1 mini. Big disappointment. Edit... change the speed settings. It works fine.

I had high hopes for this, since it has the Creality brand label on it, and the price was attractive. And I've had pretty decent results with Creality parts for my Creality Ender 3 printer in the past. But in short, this turned out to be a terrible filament. To be fair, I didn't try both the black and white spools. I started with the black, and after it'd clogged a hotend and shredded so badly inside the extruder (a retrofit Sprite direct drive) that I had to tear the whole thing down to clean it all out; I wasn't in the mood to do it all again with the other color. So black is getting returned with 975g still on the 1Kg spool (I have a spool holder with a scale built in) and white is going back unopened. The photo here shows what the worst of the jams into the hotend looked like when I got it apart. The photo also shows two aborted temperature towers and the problems with overhang. Other people have complained about stringing in the reviews for the filament. To be fair, I didn't see stringing at what I think to be the best extrusion temperature (210C). But at that temperature, the tower didn't lie, and the warpage on the overhang is clearly visible in the photo. The reason that the two temperature tower prints are aborted is that I long ago upgraded my printer to run Klipper with Mainsail (and Crowsnest) on a Linux host board, and when I did, I added a filament runout detector that has both a switch and an optical encoder that pulses for every 2.88mm of feed. I leave a little slack and let 3.5mm go by without a pulse before a "park the head and wait" macro responds to the encoder wheel not turning. With this filament, as soon as things started to jam, the printer itself was smart enough to stop before a real problem ensued. Thinking that the filament didn't have enough friction with the drive wheel, I told the software to ignore the runout encoder. And that's when the whole thing jammed up in much the way as I've read about in other people's negative reviews. I can't say definitively what causes the jamming, but because of the poor overhang and my need to be very careful in choosing a print temperature, my instincts say it's more a materials purity problem than an evenness-of-filament diameter problem. I didn't more than 25g into a 1kg spool before deciding I'd had enough, so I can't say for sure that it's wound well all the way down the spool. But from what I've seen, it doesn't appear to have tangles and the overall winding is pretty clean. It's just that the plastic itself is garbage. And that's kind of a hard problem to get around, no matter how carefully you tune things. I didn't even get as far as calibrating flow, since I'd already decided that the filament was junk and that it was going back. On the bright side, I was planning on replacing the drive gear on my extruder, since it's seen a lot of mileage over the last few years. So I had a ready-made excuse (clearing a horrible filament jam) to do it. I just wasn't planning on doing it today.

Excelente filamento, funcionando sin problemas ni atasco,buen acabado , recomendable

otimo custo beneficio exelente impressao pena naomanter o preco e estoqeu para poder comprar mais

I thought I read that those were 2spools of 2kg. They are 2spools of 1kg. They are not as cost effective as jayo filament most likely due to me being canadian.

Excelente filamento.

Excelente produto