36 Site Aeroponic Cloning Machine. Expect 100% Success Rates!

The cloner arrived in good condition and was easy to set up. I started tomato cuttings and several type of soft wood cuttings right away. The tomatoes started rooting within days and were very rooty after 1 week. I transplanted and 1/3 died and the others looked bad but are still hanging on. I will have to figure out how to avoid transplant shock better. However, while in the cloner, they looked fantastic! I got soft wood cuttings from six shrubs to see how the cloner would handle them. I picked different thicknesses and lengths. About half of the very skinniest (~1 mm thick) were the only ones that died. All the other cuttings lived. The ones that seemed to do the best were about 2 to 3 mm thick in diameter. One type of plant (I think it was mountain lavender) even started rooting after ~10 days! After 3 weeks, the cuttings were still alive and had green cambrium, buds and small leaves, although I couldn’t discern any callous. However, I didn’t see callous on the cuttings that clearly had roots so maybe callous formation is different when rooted aeroponically versus in soil. I did have to spray the cuttings with water for the first few days even though the seller said it wasn’t needed. To be fair, I was pretty brutal in cutting. I used kitchen scissors and not a razor, as was recommended. Even with my clunkiness, the cloner kept the plants alive. I’ve converted it to a aeroponic grower (it’s hard to get fresh veggies because of coronavirus lockdown) and am growing lettuce and strawberries under a grow light. They are doing great and getting big. The pump does warm up the water and it was getting too warm in the window. The temperature of the water measured at mid-day was 78.4F. I’ve moved to a cooler part of the house and am using a grow light and the plants seem to be doing better. I recommend this for anyone interested in cloning, because it works and is very easy to use.

I ordered this about a month ago, I wanted to use it for a bit before I wrote a review.. As of this day I have taken numerous cuttings from different plants around my neighborhood ranging from my neighbors roses, to a mostly dead raspberry plant, even a few sprigs from my oak tree, and sweet potatoes. Progress is as follows Day 1; no noticeable root growth, Day 2; all sweet potato cutting had root buds with 2 having small roots, Day 3; all sweet potatoes had their own root systems and were ready for transplant the oak cuttings raspberry cuttings and rose cuttings all took about 11-14 days but so far every single cutting I have taken has rooted, in a separate gallon jug I mixed 1/4 tsp Flora Duo part A per 1 gallon of water ( I used regular tap water) And I have to say pleasantly that I have no Qualms about recommending this product to other buyers even first time cloners there is one thing I should mention and that is your water pump cannot be on 24/7 or cuttings will take forever to root get a 24 hour timer and keep it in a cycle of 15-20 min on and 30-45 min off, if you have the clones under a grow light keep it a fair distance away because if the water heats up your cuttings will not grow either if you meet those conditions you should have 100% growth (assuming the plant you took a cutting from has strong good healthy genetics but that is another subject entirely) I am thoroughly satisfied with the product, I had one small issue with shipping so I emailed the seller and in less than 24 hours they had contacted me with excellent suggestions on how to resolve my problem.. All in all if you want a good reliable product this would be one for you btw even though it is a 36 site, in the box that it ships in it comes with multiple replacement inserts should you make a mistake like myself and lose one or two to an over zealous puppy that manages its own way into the grow area

Look no further - this cloner is excellent. As a first timer I'll admit I was stressed, especially after scouring reddit threads and reading conflicting recommendations about ideal cloning conditions, humidity, water temps, etc. DO: worry about water temps. Having done multiple cloning runs I've noticed that the hotter my cloning room the longer the clones take to root. At 68-72 degrees room temp they take 2 weeks. At 80 degrees they took almost a month DON'T: worry about humidity. I cloned in the dead of winter where my humidity was 20%. Excellent results DO: worry about light intensity. If you're blessed to have a PAR meter, keep light levels at ~115 PPFD for excellent results DON'T: worry about a pump timer. Some folks say to do 1 min on - 4 mins off or other variations of the same. In the included instructions it even says to keep the pump on 24/7, which is what I did. No issues whatsoever and the manufacturer knows best DO: use Clonex rooting gel on your cuttings. Optional to use the Clonex solution for your reservoir (I did) but the gel is the important part. Worth mentioning that for the reservoir you will have great results with plain tap water although I know people will still use Clonex solution just for peace of mind DO: keep an eye on your water levels. Especially as the roots establish they will start drinking substantially. A couple weeks into it you will need to top off the reservoir with about another gallon of water. This is important because if the water level gets too low the pump won't spray and your clones will be dead within hours. I learned this the hard way :-) That's about it! Hope this helps and happy cloning

Works great

Simplemente genial, pones agua, cuidas que este entre 16 y 18 grados C y no hay que hacer nada mas!

My own fault I should've checked it properly but the pump Is 120v and it blew up and switched of my electric 😄

Pesima compra, muy caro y dejo de funcionar a los 3 dias

i tryed the foam insert, with no result,after 3 week, but did get great result with rockwool cubes, try it with rockwool cubes . they fit great. after 14 to 16 days . all 100% rooting.