We remain fully operational. Our teams are working around the clock to ensure your deliveries continue safely.
DOWNLOAD THE APP
Copyright © 2025 Desertcart Holdings Limited
DOWNLOAD THE APP
Buy anything from 5,000+ international stores. One checkout price. No surprise fees. Join 2M+ shoppers on Desertcart.
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Croatia.
Specification:LP103454Typical capacity: 2000mAh, Min capacity: 1900mAhNominal Voltage: 3.7 VWeight: 55gMaximum Charge Current: 2000 mALimited Voltage: 4.200±0.020 VEnd-of Current: 40 mAMaximum Discharge Current: 4000 mACut-off Voltage: 2.750±0.005 VCharge Temperature: 0 ~ 45 ℃Discharge Temperature: -20 ~ +60 ℃Storage Relative Humidity: 65 ± 20 %Overcharge Detection Voltage: 4.28± 0.05VOverdischarge Detection Voltage: 3.0± 0.1VPCM protection function: over charge, over discharge, over current, short circuit protection, over temperature protection.APPLICATION:PSP batteryPhantom 3 standard controllerHome security systemBlue tooth headset batteryHandheld remoteBluetooth speakerKise machine batteryPDA and digital camerasTracking devicesNotebook computersPulse monitorsWi-Fi enabled smart home systems Review: Los cables estaban mal soldados, causó un corto en mi controlador. No lo recomiendo. Review: Decent battery for the price, runtime has so far been good in use, lasting around about a day depending on if the LoRa device I'm using it with has the GPS module active or not, polarity wasn't an issue in my case because I was changing the connector anyway but it is always a good idea to check, as I had to discharge it using something else before changing the connector to fit my project I did have to swap the polarity, this is easy to do if you are careful and don't allow the two contacts to short out. For my project the size of the battery was not an issue as I had purchased it prior to 3D printing a case so I could use the sizing as a guide, however again something to check if you're replacing a battery in an existing product. The battery does have an onboard cell protection board under the orange tape where the wires go in, for these types of battery it is important that there is some kind of over discharge protection and this does work as it should, after I did the initial discharge to make it safe to work on to integrate into my project I checked this out with a multimeter. All in all, it's a good value battery and because I have a similar project lined up I'm more than likely going to buy another one
| Brand | EEMB |
| Manufacturer | EEMB Co.,Ltd |
| Model | LP103454-PCM |
| Product Dimensions | 5.6 x 3.45 x 1.06 cm; 40 g |
| Batteries | 1 Lithium Polymer batteries required. (included) |
| Item model number | LP103454-PCM |
| Voltage | 3.7 Volts |
| Batteries Included | Yes |
| Batteries Required | Yes |
| Battery Capacity | 2000 Milliamp Hours |
| Battery cell composition | Polymer |
| Manufacturer | EEMB Co.,Ltd |
| Item Weight | 40 g |
E**O
Los cables estaban mal soldados, causó un corto en mi controlador. No lo recomiendo.
P**E
Decent battery for the price, runtime has so far been good in use, lasting around about a day depending on if the LoRa device I'm using it with has the GPS module active or not, polarity wasn't an issue in my case because I was changing the connector anyway but it is always a good idea to check, as I had to discharge it using something else before changing the connector to fit my project I did have to swap the polarity, this is easy to do if you are careful and don't allow the two contacts to short out. For my project the size of the battery was not an issue as I had purchased it prior to 3D printing a case so I could use the sizing as a guide, however again something to check if you're replacing a battery in an existing product. The battery does have an onboard cell protection board under the orange tape where the wires go in, for these types of battery it is important that there is some kind of over discharge protection and this does work as it should, after I did the initial discharge to make it safe to work on to integrate into my project I checked this out with a multimeter. All in all, it's a good value battery and because I have a similar project lined up I'm more than likely going to buy another one
S**N
Works perfectly! The battery holds a great charge and performs exactly as described. It was easy to install and revived my device instantly. Great quality and fast shipping — very satisfied
C**O
Ha soddisfatto perfettamente la necessità.
P**L
Work as advertized++++
Trustpilot
3 weeks ago
1 month ago