Luxnwatts 2PCS 3D Printing Build Surface Heated Bed Cover 220x220mm 8.6" x 8.6" Square for Anet A6 A8 3D Printer Black

I’m quite the newbie just build my first 3D printer Anet A8, saw many options out there glass, tape, and this style product. Glad I went this route I haven’t had any issues other than my own inexperience. Ive just started printing upgrades. The prints do need some persuasion I watched vid online and they used a small putty knife and that’s what I’ve been doing and works fine.

 I have been printing on painter's tape or "masking tape" for a year now, and recently decided to upgrade to a quality bed to print on. My first print came perfect and the 3M glue that it has works flawlessly it sticks hard to the bed. Before, with regular tape my prints will often come with tape stuck between and was a pain to remove form the bed. Now i have regular good finished prints to it.Someone review the 3M glue and said that it only stick for 2 prints, word of advice, prep the surface before using Luxnwatts, clean it with 50% -70% Alcohol make sure you remove all residue form either painters tape or any other adhesion material previously used, then use a microfiber towel to wipe everything, peel half of the side of the 3M adhesive plastic cover and start applying it to the bed, make sure it's aligned, then just put pressure and start removing all the 3M cover, make sure there is no bubbles during the process use something flat like a ruler to equally apply pressure form one side to the other, after you set your Luxnwatts bed, use a book or two and put them on top of the bed, leave them for about 10 minutes or more. You can start printing now!.One more advice, after your print is finished, let the bed cool down, it will be easier to remove the printed object once its cool.-Pros*Cheap (~$5 each sheet)*3M adhesive*hard, yet flexible plastic bed*smooth surface*easy to use and install-Consnone so farI'll Update my review if anything goes wrong. i expect to have at least a month or two of use between sheets

It's solid, durable, a great surface, but also quite thick compared to other surfaces out there. Definitely needed some extra heat to transfer through to keep ABS attached. However, after so many prints, scrape-offs, and alcohol wipe downs, every surface eventually needs replacing. That's where this loses almost all of it's value. Separation (with it seems any technique - dry, cold, hot, chemicals, scraping, wiping) leaves a nice fat layer of adhesive (likely the source of aforementioned thickness) on your bed. I've spent hours now trying to clean this crap off - and you need to if you don't want uneven surfaces, poor adhesion, or bubbles in the new sheet you're attaching. If you really must or want to use this I recommend just buying a new print bed if it wears down. I definitely regret stocking up on multiples for the future; I've ordered different, thinner, easier, more reliable, and longer-lasting sheets from elsewhere now.

So far so good... after 10 large flat surface area PLA prints I'm still getting excellent bonding and heat transfer, no need for painter's tape, hairspray, or glue stick. It is a little "softer" than the OEM mat as when the nozzle returns to the home position and zeroes to the print surface, it's leaving an indentation where there was none before. The bed height is correct and the table is level. It's not a problem in any way, just something I noted.

These pads are amazing!! I moved nozzle up to 2mm height (two paper sheets thick) and prints stick like a champ. If you move the nozzle too close to the bed then good luck getting your print off. Let everything cool down and use a razor blade to slide under the part to start freeing it up. I use small metal spatulas after that to free the rest of the part from my build plate. Really happy with this product....and they’re durable and reusable. Already on my 5th print.

Works as advertised! Covers plate perfectly with great adhesion for the print. I just wipe with alcohol between prints. Heated bed.

I got this and have been using it for a while. They work very well, giving a good print surface. The adhesive sticks very well to my aluminum bed. For the price, it's hard to go wrong.

This has helped boost my print quality! Application was easy and got it right on the first try! Feels great and durable, prints stick well.