Lypumso 3D Clear Carbon Fiber Vinyl Wraps, Automotive Adhesive Protection Film Roll, Stickers for Vehicle Interior and Exterior Body Windows with Bubble Free Air Release Technology 1ft x 5ft

Good price ! Excellent quality !

Wow. Some length of it. Last me for years. Sticky. Cut out lots shapes for projects. Great looking protection on bikes. Covers up scratches but looks awesome. Covered my silencer outer cover with it so pretty heatproof too. See photo.

This carbon effect wrap is really nice and looks great. It is not thin and flimsy but can be heated with a hair dryer to stretch it around shapes. I used it to cover a wooden box and it really looks smart. The self adhesive film is sticky enough not to have any issues when using the wrap. With these wraps just make sure everything is clean and smooth and no dust and it sticks on nice and flat. It can show any imperfections quite easily like all these wraps do. Did not get any air bubble issues but I have used these wraps before so have a little experience with it.

The wrap itself looks great, it's quite thick, but you get some room to stretch and wiggle for that, I would highly recommend using a heat gun or source of heat to get this done, edges don't stick well without it, I used a lighter to heat the edges down, but this wasn't practical really, that's advice of fitting not a negative towards the product

Love the look of this product when installed, it's got a lovely carbon fibre pattern and to the untrained eye could pass as legitimate BUT it is not pleasant to work with, the adhesion is lacklustre and within minutes of my car being in the sun on a hot day it had started to peel and lift. I ordered a second roll in case I was just unlucky and got a duff roll first time around but second roll was the same. I think the focus has been on making it look good rather than adhere correctly. For context I used Gtechniq panel wipe and dried off with a separate cloth then warmed the surface up and the film with a heat gun before applying. Perhaps my lack of experience with wrapping is the issue

No adhesive what so ever, it was just rolled up plastic

I bought this to replace the previous wrap on my car steering wheel as it was looking a little old. This arrived very quickly and there is lots of it, so will be able to wrap other things in the future. I started off by cutting a section from the roll large enough for what I needed and then laid it flat with some mugs holding down the corners and left it overnight. I was left with a flat sheet of the carbon material. It was super easy to use - I just placed my piece of trim on to the carbon fibre wrap and it stuck on with ease - the glue is very sticky. I then cut small incisions into the wrap so I could wrap around the fiddly bits. Then make sure there is no air bubbles and finish off by giving it a blast with a hair drier to make the adhesive bond to the trim and wrap it better. Very easy to use, and this is quite a large roll for such a cheap price.

👍

I have never used any type of wrap before so I wanted to use it on something besides the interior of my car first. I have a white can opener. My kitchen has a lot of red in it so I decided to try it on the can opener first. The can opener has several curves and places I would have to form it to. I used a blow dryer to heat it up to curve around places. The blow dryer worked wonderfully and it heated extremely fast which made it easy to work with. I shaped it and heated and shaped and heated some more and shaped some more. It was pretty easy to do. You will need some patience to do it slow and easy. I learned that I would mess it up if I tried to go to fast. Slow along with the hair dryer is the key to doing it. I feel confident enough to do some interior parts in my car. It sticks very well but you can pull it up easily if it’s not stuck just right and realign it. And it will stick back down really well and with a little heat over the whole thing when I finished, it’s not coming off. The heat makes it able to have some stretch but don’t stretch too much or you can break it plus your lines won’t look right. It seems like it’s going to hold up very well. And it’s not paper thin. It has a good thickness to it and you don’t have to worry about it coming up or pealing off. I tried and I could not tear it with my hands. I’m very pleased with it and can’t wait to get inside my car with it. I got the red and it’s a nice bright color. I half wish I had got the matte instead of shiny but it still looks good. And it’s not extremely shiny. It’s more of a dull shine which I do like. To much shine would make it look cheap. If you’re looking for this type of product I would recommend it and I would purchase it again if I needed more. I love that they have so many colors to choose from. After I do my car I will update.

I’m a newbie to this “wrapping” but this was easy to apply and seems to be of good quality.

Many scars and scratches not happy with it

I used the Lypumso Carbon Fiber Vinyl Wrap 6D Gloss Black on several parts of my car, and I’m extremely happy with the results. The finish looks incredibly realistic — the gloss and texture have that carbon fiber depth that really elevates the look. 🚗 Appearance: The 6D gloss black effect is stunning. It reflects light beautifully and gives a premium, high-end look that’s way better than the flat vinyl I used before. 🛠️ Ease of Installation: Installation was smooth and easy. The vinyl is flexible and conforms well to curves, and I had no problem applying it even around tricky edges. It’s also repositionable during installation, which made it much easier to get perfect alignment without bubbles. 📏 Quality & Durability: The material feels thick and durable, and the adhesive is strong without being overly sticky. It handled heat and sun exposure well with no lifting or peeling after a few weeks. 💯 Overall: This vinyl wrap is a great value and looks way more expensive than it costs. If you want a sleek, glossy carbon fiber look on your project — car interior, exterior trim, or accessories — this is a fantastic choice. Highly recommended!

El paquete llegó sin problemas ni retrasos a México. El vinil es de una muy buena calidad, es de fácil aplicación y con ayuda de pistola de calor es mucho más fácil de aplicar. Cambia por completo el aspecto del la pieza que forras. Cómo dato o consejo extra, para darle un acabado más pulido y reluciente le puedes aplicar de los aerosoles transparentes, y queda impecable. Ampliamente recomendado.