12 Pack Basswood Sheets for Crafts 12 x 4 x 1/8 Inch-3 mm Thick Unfinished Plywood Sheets Thin Craft Wood Sheets Boards for Drawing,Painting, Wood Engraving, Wood Burning,DIY Laser Cutting Projects

These larger basswood sheets are perfect when a project requires more space than the smaller standard sheets. The dimensions were accurate, the overall quality was very good, and the wood cut beautifully on my laser cutter. The surface finish was clean, and the material worked extremely well for larger designs and prototypes. Because of the increased size, the sheets are somewhat more prone to warping than smaller pieces. This is not unusual for wood products, but it is something to keep in mind when planning projects that require a perfectly flat surface. Overall, this is a high-quality material that offers excellent value for the money and is an excellent choice for larger laser cutting and engraving projects.

I purchased the "12 Pack Basswood Sheets for Crafts-12 x 12 x 1/8 Inch- 3mm Thick Plywood" for the purpose of cutting with my diode, tabletop laser for some crafty projects to sell and gift. I've used Lauan plywood in the past, but was looking for something thinner (3mm vs 5mm) and harder/denser. I've seen plenty of reviews for different items stating that the boards they purchased were not flat, and that was a primary concern for me. My laser head sits close to the material, and anytime there is much variance in product height there is a chance the laser head will drag or move the product, resulting in wasted time and product. The plywood I received was without blemishes, and flat. What more can I say? After cutting the plywood I do see that there is sometimes warpage in the material. But it was flat when I received it, and also when I put it on my grid to cut. I don't think it's humidity. What happens, I believe, is that the material heats up from the laser (more in some places than others) and it warps slightly from that. Remember, it is layers glued together. I've cut out a large (nearly 12" x 12") monogram, and afterwards it had zero warpage. When I have done Christmas tree ornaments with a lot of detailed close cuts I see slight warpage, but nothing that has been noticed by others. I hope this is helpful!

I’ve been using these 12 Pack Basswood Sheets with my 10W laser cutter for a few months now, and they are an absolute game-changer for crafting! The quality, consistency, and ease of use make them ideal for laser engraving, cutting, and various other woodworking projects. Exceptional Quality Each sheet is smooth, free of knots, and uniformly cut, ensuring precise results every time. The grain is fine and consistent, allowing for detailed engravings without splintering or uneven cuts. The basswood is lightweight yet durable, making it perfect for projects that require a professional finish. Laser Compatibility With my 10W laser cutter, these sheets perform flawlessly. They cut cleanly with minimal scorching, and engraving produces crisp, detailed results. The sheets are just the right thickness to balance structural integrity and easy cutting, making them versatile for a range of projects—from intricate ornaments to sturdy miniatures. Ease of Use The sheets are true to size and flat, requiring no extra prep work before use. This saves time and effort, especially when tackling larger projects or fulfilling orders. Their lightweight nature also makes handling and storage a breeze. Perfect for a Variety of Projects I’ve used these for everything from custom coasters and signs to intricate models and decorative wall art. They take paint and finishes beautifully, making it easy to customize your creations. Great Value For the quality and quantity, this 12-pack is a steal. It’s perfect for hobbyists and professionals alike, providing consistent results without breaking the bank. Final Thoughts These basswood sheets are a must-have for anyone working with a laser cutter or looking for high-quality crafting wood. They’ve become a staple in my workshop, and I can’t recommend them enough. If you’re after clean cuts, detailed engravings, and reliable performance, these sheets won’t disappoint.

Good product, came on time, good shipping!

The sheets measure a little on the thin side at 2.89 mm thick. If they are supposed to be 1/8" thick then that would be 3.175 mm. Again, not quite there. Otherwise they look pretty good except for a little warping for a few of them but I think I can make them work with some double sided tape to hold them down while engraving them. I'll just have to watch how deep i set the router bit.

Me encanta, lo pedí para hacer una manualidad y llegó exactamente como en las fotos. De excelente calidad, lo recomiendo mucho

I'm not new to laser cutting or engraving wood. I've tried several brands and this one is pretty poor in my opinion. I purchased it due to it's smaller size so I can maximize what I cut from one board. Only a couple of the boards were warped. The thickness seems to be 3mm as advertised (I did not measure it) and the surface is quite smooth. It is possible I just got a bad batch but there's tons of voids and cutting is extremely inconsistent. Some boards need less power while the next I have to increase power because it didn't even cut through. Engraving is inconsistent as well. Sometimes it comes out beautiful, other times due to the voids in the wood it's unsalvageable. I'll purchase wood from the previous seller I used from now on. This one didn't cut it for me, pun intended.

Easy to use wood with little warping for laser cutting. Size is as described, color is normal and as expected. Holds up nicely in my Glowforge. Cuts well. Will continue to purchase as this is the level of sturdiness I’m looking for.

This is not basswood. Its just mdf sheets. Kindly return the product. The seller is trying to cheat us. Kindly dony buy from this seller.

Okay

This product, the 12x12 is over 5mm thick. and the basswood seems to be the middle layer, the veneer looks like Mahogany. very bad description

Firstly, this isn't a full 12" wide - it is 300mm, which is 11.82". Secondly, I have seen batch-to-batch thickness variation. First order was dead-on 3.0mm thick. Second order was 2.75mm thick - workable, but if you are making tab-and-groove construction that relies on a standard thickness, measure first!

Reasonable quality although I have found that when cutting on a laser to produce layers maps they do have a tendency to warp. Not too much of a problem if you intend gluing the layers down and fixing into or onto a frame - just be aware.