GEAR AID Tenacious Tape Gore-TEX Fabric Patches for Waterproof Jacket & Rain Gear Repair, Black, 2.5” x 2.8” Hex & 2.5” x 4” Rectangle, 4 Patches

Title: GEAR AID Tenacious Tape: The Ultimate Solution for Snowmobile Bib Tears As an avid snowmobiler, I rely on my gear to withstand the elements and keep me protected during exhilarating rides. When my snowmobile bibs developed tears and holes, I turned to GEAR AID Tenacious Tape Gore-TEX Fabric Patches for a quick and effective solution. Here's why I couldn't be more impressed: Rapid Repair: The GEAR AID Tenacious Tape patches offered a lightning-fast fix for the tears and holes in my snowmobile bibs. With minimal preparation, I simply cut the patches to size, applied them to the damaged areas, and pressed firmly to secure. In a matter of minutes, my bibs were ready for action once again, saving me valuable time and hassle. Durable Performance: Despite the rigorous demands of snowmobiling, the GEAR AID Tenacious Tape patches proved to be incredibly durable. Designed specifically for use on Gore-TEX fabric, they provided a strong and long-lasting bond that withstood the rigors of my adventures on the snow. Whether facing abrasive surfaces or harsh weather conditions, the patches held up admirably, maintaining their integrity ride after ride. Waterproof Protection: One of the standout features of the GEAR AID Tenacious Tape patches is their waterproof design. Not only did they effectively seal the tears and holes in my bibs, but they also provided an additional layer of protection against moisture infiltration. Even when navigating through slushy terrain or encountering unexpected snowfall, my bibs remained dry and comfortable thanks to the reliable barrier provided by the patches. Flexible Application: The versatility of GEAR AID Tenacious Tape patches extends beyond snowmobile bibs. I found them equally effective for repairing tears and holes in other outdoor gear, including jackets, tents, and backpacks. Their flexible application makes them a valuable asset for any outdoor enthusiast seeking quick and reliable repairs on the go. Cost-Effective Solution: With multiple patches included in each package, GEAR AID Tenacious Tape offers exceptional value for the price. The ability to extend the life of my gear with a simple and affordable solution speaks volumes about the cost-effectiveness of this product compared to expensive repairs or replacements. In conclusion, GEAR AID Tenacious Tape Gore-TEX Fabric Patches surpassed my expectations as a reliable and efficient solution for repairing tears and holes in my snowmobile bibs. With rapid repair, durable performance, waterproof protection, flexible application, and cost-effective pricing, these patches are a must-have addition to any outdoor enthusiast's gear arsenal. I highly recommend them to fellow snowmobilers and adventurers seeking quick and dependable fixes for their gear.

My boyfriend has this hideous black down vest that I hate. His dog bit into it and cast feathers everywhere. I hoped it was the end of the ugly vest until he pleaded with me to "fix" the big chewed dog hole in his vest. The hole was about 2" long and i tried to sew it. No such luck, there were still feathers everywhere coming through. I purchased a traditional patch, but it needed to be melted on and the material of the vest was nylon, so there is no way it was going to work (would have melted the origional material.) I came across this Gear Aid GORE-TEX Fabric Repair Kit. It was my last attempt to fix this vest. Well, it worked PERFECTLY. I attached it right over my poor sewing job and then put it in a low heat dryer the next day (for about 20 min). My boyfriend was so impressed with the repair, he couldn't even FIND the repair at first. This is a wonderfully strong product that I WILL buy again if I ever get a tear in a down jacket, sleeping bag, tent, or similar structure. The item worked as specified and made for a very clean repair. My only problem now is that my boyfriend is back to wearing this hideous vest all the time....at least now there are not feathers falling out of it. :) **note: if you wanted to use this patch for a tent (or similar thin material) you would probably be best to patch both sides of the fabric. This would eliminate the sticky residue on the inside of the patch. You could set it with a low heat hair-dryer or sit in the sun for a day. It would make a great "on-the go" patch for avid hikers/campers since it is self-adhesive.

Nice patch. Didnt match 100% but very close! It did the job!

In the two pictures: First is when a GoreTex patch was applied to a pair of Men’s Ski Pants in the crotch to repair a repeated split opening of the stitching. The 2nd picture is the same pants put after 4 days of Alpine skiing and riding chair lifts as well as two times snowshoeing. The patch is holding up very well in a very difficult area subject to stress and strain and pulling. It’s been 3 weeks since the patch was applied. The technique I used was as follows: cleaned the pant area with denatured alcohol and used a hair dryer to dry. Cut the rectangular piece of Gear Aid Gore-Tex to size and rounded the 4 corners. Heated first the pants area with hair dryer and then applied the patch and pressed firmly in place and used the handle part of a hair brush to apply pressure on the patch while sliding it along the patch. Then using the hair dryer I heated the patch evenly and again using the handle to apply pressure. Did this heating and applying pressure three times. Do not over heat the patch because you could possibly separate the adhesive from the fabric part of the patch. The point of the heat is too soften the adhesive and base fabric (pants) just enough so as to assist the adhesive to work it’s way into the base fabric to create a bond. Then let it cool and don’t apply anymore pressure. I left the pants untouched and not used for 24 hrs. The results are quite impressive so far considering this difficult application. If it were just a sleeve or shoulder or back of a coat or pants then it would even be more impressive results. I hope this patch works for years. We shall see. Based on above I would recommend this product. I think more color choices would be very helpful for other people with different fabric colors. In my case it was a great match of just their standard Black Gore-Tex

If you look at my ratings profile, you'd probably think I give out too many 5 star reviews. While that does seem like it is the case, I really do not buy too many items from Amazon that I have not thoroughly looked at and found to be highly rated by other Amazon shoppers. These Gore-Tex fabric patches are no different. I have a camouflage Gore-Tex rain suit for hunting and recently when I was stepping over a barbed wire fence, I didn't push the fence down low enough or step over high enough and punctured a hole in my suit. I found these rated highly on Amazon and bought them. These are not too heavy a material for my rain suit, they cut to size easily and they ironed on very easily, sealing very tightly and conforming to one of the seams very well. I am very glad I found these to repair my Gore-Tex rain paints with. I bought an extra package to have on hand should I do the same thing again in the future. Updated 6Feb2020: Two years after I used this to repair a hole in my Gore-Tex hunting rain suit and the patches are still hold strong and not peeling up on the edges. I wear this gear several times a year while hunting in inclement weather. I am very happy with this product.

Patches work well, covered the holes in my jacket… keeping it waterproof ☔️

Very good. Strong, easy to apply, appears to be a durable repair

Gave it 24 hours to adhere, went through 1 wash right after because pants were dirty and i was reactivating the dwr in my pants so its water repellent again. I was given by arc'teryx patches for my beta ar pants and also let them adhere for 24 hours before doing anything. Both this and arc'teryx supplied patches done at same time. This patch came slightly off at the edge after 1 wash but the arc'teryx warranty supplied ones didn't, after 1 bicycle ride this one started peeling. Ive circled the patch to show. It also has a different darker black compared to the arc'teryx supplied patches. Ill have to remove and retry this patch, maybe give it many more days to adhere and apply a heat gun from a distance to warm it up so it adheres better. I think if you have a hole in a less active area on your body, it may perform better. But for both patches, i still felt and saw water on my knee after taking them off, so these aren't really water repellent by themselves from what ive experienced. You should buy water repellent spray to coat it so it actually performs.

I found it impossible to remove the backing paper no matter how long and carefully I tried. Creating small patches, medium sized patches and large patches made no difference. My experience is that this product doesn't work.

Installation facile sur un accroc. L'adhésif est puissant . Je préconise de bien suivre la recommandation consistant à passer un coup de fer (pas trop chaud) sur la pièce. C'est propre et net: rien à dire!

Great adhesive

Hält fest auf Tex und macht wieder dicht, hat auch schon Wäschegänge überstanden, einfach anzuwenden.

Excellent pour réparer les petites coupures sur les pantalons de ski