[2 DOME GLASS + UV LAMP PACKAGE] Whitestone Dome Glass Screen Protector for Google Pixel 8 (2023), Full Tempered Glass Shield with Liquid Dispersion Tech [Easy to Install Kit]

Very relieved to say this screen protector worked perfectly on my first attempt at attaching it. It's an intimidating process and I'm not sure what some of the reviewers have been doing wrong on here but this product definitely worked perfectly for me. As I'm sure everyone who's ended up on this page is aware, every screen protector on the market for the Pixel 8 fails to cover the curved edges of the screen and leaves a horrible air bubble on the edges that makes an already relatively small screen look even smaller. Happy to say this product solves this issue and attaches so neatly and tightly to the screen that you can't even tell there is a screen protector on the phone. My only tips are: 1. Give the video and manual a good study, I must have spent a good 30 minutes watching and re-reading the manual before attempting the installation process. When you scan the QR code to watch the instruction video, the video is designed for the Pixel 6 (or possibly 7) which was a bit disappointing but the process seems to be exactly the same for the 6, 7 & 8. 2. Make sure your surface is very level, my desk it seems is a tiny bit slanted to the right as the glue started running off to the right hand side of the phone once I poured it onto the screen - luckily I was able to tilt the phone a bit to the left and make the glue run back to the centre just in time. 3. When it came to pulling out the pin to drop the screen protector onto my screen all the glue started pooling towards the bottom half of the phone screen. It took me a good few seconds to realise the screen protector hadn't dropped all the way onto the top half of the screen so I had to nudge it down onto the screen with my finger. Was a very nervous moment but once I nudged it the glue started spreading out across the screen perfectly. 4. I went a bit overkill on the UV lamp drying time to ensure it was solidly connected, an extra minute or 2 on each section just to be sure. I've seen some reviewers complaining that the protector popped off once they put the phone inside their protective case, I'm using a fairly basic armoured £10 protector and I had no problems getting it into the case without damaging the protector, just be careful and gentle.

Probably works great but after 3 application attempts to get the adhesive to spread throughout the whole screen surface I gave up and binned the lot. Will buy a cheaper alternative that doesn't require luck to install properly. Or 2 instruction books and a YouTube tutorial. Alternatives probably won't protect as well, but I'm sure it'll do the job and I won't have to pour adhesive on my phone screen and hope for a good spread.

Very durable screen protector. Feels like original screen. I've had it for almost a year with no issues. Great protection for Pixel 8. Update after 1.5 year: it saved my screen - not even a scratch after a big fall. Picture attached. Just ordered another set of protectors to replace it. Not cheap but worth every penny.

I bought this screen protector after being disappointed by other offerings for the pixel 8, hoping that a more premium product would give a better application, and last longer. This product is definitely better than others. So if, like me, you want a premium screen protector for the pixel 8, this is probably going to be the best choice. My screen protector is now on my phone, with not a bubble in sight, which is genuinely fantastic! Unfortunately, I ended up wasting the first piece of glass that I tried to apply. I followed the steps carefully, but when I dropped the glass in, I noticed a big bubble had appeared in the adhesive. Great. I attempted to take the glass off and reapply, but by this time, the glue was already starting to cure, rendering the glass useless. (In hindsight, this is entirely my fault. The glue cures with UV light, so best not to do it near a window). I wiped the phone down and tried again, this time ensuring the phone was spotless and there was no light coming from the window. This time, it worked perfectly. Some tiny bubbles that I was able to push out. No issue. I allowed the glue to cure with the UV light, and the result was impressive. It feels solid, and doesn't have any bubbles or lifting. An extra tip, once the adhesive has spread and you've removed any bubbles, ensure the protector is exactly in the middle of the phone before curing. Mine is slightly off to the side (not an issue, just not perfect), so it's worth mentioning. Overall, this is a good screen protector. Of course, time will be the ultimate judge, but right now it looks great and feels solid. The application process is more complicated than your average protector, but if you have time, patience and follow the instructions to the letter, the result is impressive.

The install was complicated, and the manufacturer's instructions weren't the best. Found an alternative YouTube tutorial (the steps are the same as for Pixel 8 pro). Watched the tutorial several times and successfully completed the install first time. To be sure that the glue cured I put it on the 60s run twice. Screen fits perfectly, surface is so smooth!

I considered docking a point due to the complexity of the procedure but that would be unfair as it does exactly what it promises, it is just a delicate operation. The product works as intended but do not rely solely on the included 'instruction' sheet because it is not good enough. A quick search on a search engine will get 'you' a 'tube' video that will have a person narrate the process as they do it and a visual aid makes it much easier to understand. Keep an eagle-eye on the liquid once it's released onto the phone because it is easy to get distracted prepping the screen and you really really do want the liquid to be in the middle once you drop the screen down.

Nachdem alle herkömmlichen Selbstklebenden Schutzgläser beim Pixel 8 versagt haben (immer unschöne Stellen am Rand, an denen das Glas nicht richtig klebte), hat es mit dem Whitestone Dome endlich perfekt funktioniert. Ist nicht ganz billig und auch deutlich mehr Aufwand, lohnt sich im Ergebnis in meinem Augen aber total.

I tried 2 other cheaper screen protectors and they all had problems with the edges sticking. I came across this screen protector and decided to try it. The installation process wasn't too bad, you can find tutorials online to help you with each step. This thing fits like a dream! No bubbles, no lifting, no problems. The clarity is crystal clear as if there was nothing on your screen and the fingerprint reader works perfect. It's case friendly and I can confirm it works with the Otterbox symmetry case and the Speck presidio grip case. The box it came it said it was the Pixel 7 pro, I have no idea why but the actual unit inside the package said Pixel 8. Save yourself the time, money and effort and skip the cheaper screen protectors and just get this one.

J'ai passé plusieurs heures à lire et rechercher un verre trempé de qualité pour mon Pixel 8. Après plusieurs déceptions de verres trempés d'autres marques, qui eux, laissaient tous un jour entre l'écran et le verre de protection... Cela est dû à la forme arrondi de l'écran du Pixel 8. Je suis finalement tombé sur le bon produit qui à su résoudre ce problème ! Certes celui-ci est relativement plus chère que les autres, mais le résultat est là. Je dois avouer que les avis client m'ont convaincu, merci à eux 👍 Je poste ce commentaire dans le but de rassurer les futurs acheteurs. Quelques points à savoir ; - Le verre trempé n'a pas de poinçon au droit de la caméra frontale. - Celui-ci est de très bonne qualité, à tel point qu'une fois installé, on en oublie sa présence. - Les bords sont légèrement arrondis, ce qui est agréable au toucher. - La reconnaissance d'emprunte digital fonctionne parfaitement pour ma part. - La boîte comprends deux verres trempés. La méthode d'installation est originale et novatrice. Un gel est à appliquer entre l'écran et le verre trempé. Celui-ci durci sous la lumière de la lampe UV (fournie dans la boîte), ce qui permet de combler les vides généralement laissés sur les bords de l'écran par les autres verres trempés. L'installation est assez simple à réaliser en suivant le tuto vidéo à partir du QR code présent sur la notice. Je vous laisse juger du résultat une fois le verre trempé installé sur le téléphone !

Best screen protector for Pixel 8 at this time. Actually adheres to the phone and no bubbles or edge problem. Yeah the install is a process but well worth it

I bought a White Stone screen protector for my Pixel 8 and I'm happy that I did. This one is the perfect fit! Screen is covered almost completely, and no bobles on the sides. Although this glass is a little pricey and the installation process is a bit harder than with usual screen protectors. I tried a few cheaper options before ordering White Stone, but they didn't fit. Also when I received my order I thought that they made a mistake and sent me a wrong screen protector, because the title on the box was for Pixel 7 Pro. But when I opened it, I saw that the actual kit is for Pixel 8. Good product, I hope it will last 😁