wolfcraft Bi-Metal Hole Saw, Ø 83 mm I 5476000 I For drywall materials, wood, plastics and metals, cutting depth 40 mm

I ordered this and it arrived super quick..... it's a hole saw! it has a diameter of 60mm! I've not had much experience with hole saw's.... it is a one piece unit, with a 'Hex' nut drill shaft, that fits into your drill chuck, it is surprisingly heavy and feels (and looks) well constructed, I have not used it yet and will not use it for some time, but I intend it to be used to drill/saw through 28mmm kitchen worktops, the package claims it will cut through metal.....it looks like it will have no trouble in doing so. It comes packaged in a tubular box, which open and closes really easy so can double as long term storage in between cutting holes in the various materials it is capable off, I like this because its a no hassle one piece unit... all that can really go wrong is if I try to drill/saw with my drill in reverse? I drilled a hole in 32mm MDF, half way through I turned the material over and drilled from the other side, from pressing the trigger too finishing with a perfect 60mm hole, it took me 120 seconds, Time will depend on the power/age of your drill, I used a 750 watt drill with a 13mm chuck, and the hexagonal end only just fits, if YOUR chuck is less than 13mm this will NOT fit into your chuck! It took longer for me to unpack my drill than the actual job. I have taken a picture of the results of the hole saw.

This hole cutter is fantastic!! I used it to fit a round retractable triple plug with 2 USB ports in my coffee table. The wood is an Indian hardwood and it went through absolutely no problem, using my battery drill. It's great as now I don't have cables everywhere. Also I loaned it to a friend for the same job but he was fitting the multi plug unit into his kitchen worktops, he actually commented on how good the tool is and I completely agree. I've used the other yellow ones with the red brand name on them and actually think that these are as good as if not better than them, my friend agrees. I will be buying this brand from now on. One tip I do have is that I really would advise you to spend that little bit extra for jobs like the ones I have mentioned above as it really does make a difference. If it's for downlighters or something through plasterboard, then you can get away with those cheaper ones but as I've learned over the years, you get what you pay for. Also this tool being red in colour doesn't mean it's one of the cheap ones. This is a brand name and far superior. I tried to get as much detail in with the pictures as I could. The sturdy case it comes in too is a great idea.

good product but if you are using for led downligh cuttouts you can fit a silicone dust collector cap as the base isnt log enough- if you have an extension bit then it may work.

This Wolfcraft 5493000 100mm Bi-Metal Hole Saw was purchased so that I could drill though a 2 inch thick work surface in order to mount a new Power Bar. It was quickly delivered by Amazon & I nervously put it to use on the thick work surface as it was almost too think for the drill. Nevertheless, the drill worked perfectly & after a few minutes I was able to install my PowerBar, which looks fantastic in the work surface. So for just a few pounds, I was able to drill my own work surface in about 15 minutes; there is nothing more than needs to be said. Whilst I could resell the drill, I shall add it to my ever growing collection of tools for future projects. This was a fantastic drill, it was delivery quickly, works well & was value for money; I highly recommend it to anyone who needs to drill a 100mm hole.

Purchased these to complete a garden project of creating a replacement raised border with railway sleepers. Appreciate they are advertised as decking lights but they are also great as per our use (photo attached of 95% finished project). One word of warning, make sure you do a test hole first! Product packaging states 23.5mm hole for lights and on checking with seller, they recommended 25mm BUT to do a test hole first - great advice as we found hole size need for sleepers was actually 22mm. All lights worked first time (even immediately after install with little solar charge) and appear to last hours - have not been sad enough to stay up to see when they actually switch off at night! After initial purchase of 2 packs, went back for a further pack to finish the job. Great product and very bright!

I used this to drill a hole for our new kitchen tap. We chose an Ikea mixer tap and I drilled through Ikea laminate worktop. I used my Black and Decker battery drill and it worked brilliantly. I first masked the area, drilled a pilot hole, took my time when drilling the actual hole and the result was excellent. A very smooth, straight hole with no chipping of the laminate. The hole was also the perfect size for the Ikea tap. Excellent product. I hope you find my review helpful.

Nice hole saw, nicely made and works efficiently. However unlike other hole saws I've used there are no holes in the top of the cylinder that would enable you to push out the removed material. This means that you must either drill a smaller diameter hole first to give room to 'hook' the ring of material cut by the hole saw, or undo the grub screw holding the centring drill so that it and the material can be removed. Either of which are a pain if you're drilling a number of holes.

Used this to cut holes in a lath and plaster ceiling for fire rated gu10 downlights on my living room. The quoted cutout hole size for downlights was 85mm I did a lot of reading about cutting holes on lath and plaster ceilings. I ordered the holesaw and it arrived a few days later. All I can say is this is a very good holsaw, it is very well made and is nice and thick . I cut perfectly smooth holes in lath and plaster ceiling, no clogging or snagging while cutting. Its supersharp teeth made light work of the lime plaster then jade light t work of the hard wood lathes. Mininal effort required as the cutter is so sharp. Before I started on this project I had read loads of articles about cutting holes in lathe and plaster and how difficult and a fragile operation it was, but no worries with this holesaw. It cuts like hot knife through butter. Great product quality product.

Perfekt um ein passgenaues Loch zu sägen. Hervorragendes Preis- Leistungsverhältnis.

Aussitôt arrivée, aussitôt mise au travail. Perçage efficace d'un plan de travail pour l'installation d'une prise de courant double encastrée. Tout en respectant une vitesse lente pour ne pas chauffer l'outil, çà c'est très bien passé. Profondeur de coupe top niveau, juste assez pour arriver à 2 millimètres du fond et finir la coupe en dessous proprement, sans bavure. Extrêmement satisfait de cet outil, qualité et prix TOP, merci au vendeur.

Buen Producto, buen precio y gran calidad. Cumple su función perfectamente.

je l'ai testé sur des parois tel que gyproc et osb pour le moment rien à dire, la découpe se fait rapidement sans problème (très facilement en fait) facile à utiliser

top!