Bestand Single Monitor Wall Mount- Monitor Stand for LED LCD,Up to 17''-27'' Screen,Aluminum (Grey)

I'm happy with this mount, but there are a couple of quirks. As another review said, the top two holes are wider than a stud. If you can determine the exact width of your stud, you can get the bottom screw and one of the top screws in tight. The third screw will use one of their plastic drywall screw-support things. I would definitely not have all three screws in the plastic things.Something the instructions don't tell you is that the bottom of the wall mount is just below the lowest the monitor can go. It's best to install it a little too low than a little too high.Another review says it doesn't tilt forward. That isn't exactly true. It does tilt forward just a bit; just enough to remedy the top-to-bottom image variation seen with TN monitors. If that's not enough of a tilt for you, you can put a few washers between the monitor and the bracket which force the top edge of the monitor a little more forward and give you some extra tilt. (That's not from the manufacturer; it's just a thing I tried.) Either way, though, don't tilt the monitor by twisting the monitor itself. On mine anyway, it is super hard to tilt the monitor. I have the tilt fully loosened, but it is still hard to tilt. (It seems the tilt-control screw has little effect fully tightened or fully loosened. It's hard to tilt no matter what.) I have to handle the bracket directly to get it to tilt without feeling like I'm going to crack my monitor in half. Maybe a drop of oil or something...In any case, I still like it. It does what I want it to do.

I bought this to have a wall mount stand for a guitar effects counsel (Line 6 Helix) that I could pull out from the wall and push back in when not in use. It works great and is sturdy with the 17 lb. unit after some tightening with the included hardware. Highly recommended!

The images were not very clear and I had expected to be able to wall-mount it higher and have the arms descending. Unfortunately, the arms only extend upwards.

Sturdy, easy to install. When in the fully "upright" position the monitor is tilted backwards so that the top edge of the monitor is further away from your body than the bottom of the monitor. I'd say it is about a 91 or 92 degree angle from the ground. The monitor can be tilted back further, but cannot be tilted forward. This makes the monitor arm useless for most purposes because the top of the screen appears much darker than the rest of the screen, and the problem is made worse if you need a non-traditional chair such as a recliner. This is a *common* issue with monitor mounts claiming to be fully articulating/adjusting.

Outstanding item... allowed me to give staff full access to their workspace and the ease to maneuver and position the monitor at the desired position...Also help make the are allot more ergonomically for all users.

I picked this mount because of its advertised flexibility, and I was not let down! It has a sturdy build and a place to hide the cables. Easy to install, so I would highly recommend this mount. It holds my Asus MG28UQ with ease.

High quality product. The wire management system is perfect! I actually use this for the 34" Alienware G-Sync monitor and it works perfect so don't be afraid to get it if you have a 34".

Perfect wall mount for my 27 inch monitor. Sturdy, easy to assemble and just as advertised.

I was in need of a wall mount for my 32" PC Monitor. After looking for all that the market as to offer, I opted in with this one. The assembling was somehow simple but the radius for the 3 holes were a bit wider than I was expected to be.The monitor fits and stays well. I was a bit concerned, being a 32" screen, but it offered no problem at all sustaining the weight.One thing that I didn't like too much is that you need to be a bit careful while positioning it because when i move it closer or further from the wall it also needs to move horizontally for one of the sides. I would like that it had a system that could allow move it closer/further without moving it sideways.Other than that, the materials used are very solid and sturdy, high quality. It is a big arm, so reserve some space for it.

My hubby loves his new monitor stand, very sturdy and fits his needs perfectly. He did mention that he had trouble with the allen key as it wasn't a good fit for the main part, so he had to find another and that the management of the cables good be better, but all in all, he's very satisfied with this product.

Suitable for LG 34UC99 Ultrarwide Monitor

I was a little bit worried about this wall mounting arm working with my 34 inches monitor, but recently installed and it is super good. Feels good quality. Highly recommended.....

A high quality, easy to fit monitor stand, that is actually engineered to do the job properly... unlike many cheaper options!