OVERTURE Dual Color Matte PLA 3D Printer Filament 1.75mm, Matte PLA 1kg Cardboard Spool (2.2lbs), Dimensional Accuracy +/- 0.02 mm (Matte Blue-Red)

Just WOW!. I'll update with photos of my prints later on. I've been searching for matte filaments and there seems to be limited options. Not only have i think i found it, i dear say i found my goldilocks filament. Ordering 3 more rolls next week as I've been printing 24hrs a day since i got it a few days ago. Excited to try other colors. Roll was nicely wound and print quality is astounding, printing is very easily and was dialed very quickly. and i have zero complaints so far. Layer lines are pretty much invisible even at .2 layer heights. .13 is jaw dropping.Been printing an order for a local hobby shop and they at first didn't believe it was 3d printed as it looked multitudes better than previous filament I've used on their order. I've been printing on my mostly stock ender 3 v2. Only modifications are z-brace rods, bltouch, dual z and printed z motor mounts. Printing here the update NY winter is usually challenging as where i print in my home can be as low as 10c ( will be finishing my enclosure soon). Saying that my only struggle has been minor corner warping and bed adhesion. but i doubt that would be an issue in warmer rooms. The issue has been resolved though as i really squish my first layer (leaves very fine elephant foot that cleans quite easily with a sharp hobby knife or 220grit sand paper) since i print 7-20 parts at a time. Can't afford failures. I am printing on the stock textured side of the ender 3 glass bed.For those with an ender 3 i do Hot end at 195-200c, 60c bed temp at 40mm sec (as i prefer quality over speed ) retract 6.5mm 50mmsec, default cura coasting settings and filament equalizer enabled. 75%-100% fan after initial 2 layers.I'd also like to add that my printed upgrades are done in hatchbox abs for strength and temperature resistance. But now any parts that aren't at risk of high temperature exposure I'm using this matte black pla because it looks that amazing and is suitably strong.If I run into any issues I'll update accordingly.Update 7 Days LaterSo i ordered this filament for an order for a hobby shop. Printing drag racing slot car stands. I printed 96 of these in 4 different filaments. After the first 28 this filament arrived and after the first test prints i was amazed and now only use this filament. I went through the whole 1kg roll in 6 days. Ordered another and already been printing into the 2nd roll. I've updated my nozzle temp to 210c and I'm using a .8 brass nozzle. A worth while mention is these stands i print they're only 3 bottom 2 top, 1 perimeter and 0% infill. And they're almost perfect, very light and just as strong as previous prints with .4 using 3b 4t and 2 perimeter. The watering can is from thingiverse and printed at 60mmsec, 3 bottom and in vase mode. Also worth noting i check filament diameter periodically as i go through the roll and so far it's been between 1.72-1.77mm.Overall still my new favorite go to pla. I definitely prefer a matte finish and this filament definitely delivers.

I got this specifically for the flecked stone/marble effect shown in the photos, as I wanted to print some busts/statues.I use a Flashforge Adventure 3. First, I had to print a spool extender, because my printer uses a specific size/type of spool. Once the extender was on, this rolled out and fed in smoothly.My printer bed has its own way of making this pla adhere, so I can't comment on how this would adhere to a flat bed. But I've had a normal glue stick work fine for me in the past on my Creality cr10.I use my machine's stock settings. This rolls through smoothly with no tangles. It adheres to the bed and itself just fine. I've printed out a bust, a statue that had failed supports, and am redoing the statue with proper supports. This has worked out to be very smooth and clean printing so far.The 'stone' style gives it a bit of a rougher feel than some other filament that I've used, but that's fine for me, because that's what I wanted.Overall, a great filament for statues, busts, stones, stone walls for tabletop gaming. Normal price range for this type and amount of filament. Will buy again. I have a lot of stuff to print now that I have a good printer.

As someone who 3D prints A LOT... this filament has become my go to for several reasons. First, it looks really nice. The matte finish makes prints appear post processed before they are sanded. Second, the quality control is excellent, I have never received a bad filament after ordering hundreds of rolls. Third, it prints perfectly. One random thought is that I love the cardboard spools. The only negative I would say, and this is similar with all PLA filament, is that it readily absorbs moisture from the air and this will ruin print quality. Be sure to dry this filament before use if it sits out a long time in a humid climate.Overall, HIGHLY recommend this filament.

Got this filament for the price. It prints out ok, but with prints that require any sort of infill I experience a lack of layer adhesion, meaning at times the filament does not want to layer nicely onto the next . Would probably need to reduce infill speeds. This was all observed using a Bambu Lab P1P and A1S

I've bought from OVERTURE for awhile now. If I've learned anything, it's that their filament is awesome. This matte green is simply amazing to look at. If you're on the fence and looking for budget friendly prices, this is the way to go.Printed on a Bambulab P1S(The Stringing is most likely due to user error within the slicer)

This is the easiest PLA I've ever had the pleasure to work with. It just works. I'm using it for a complex, hollow mask filled with supports, that's a day+ long print. I bought some fancy high end Polymaker for the job, and it's been a nightmare of failures, but this one knocked it out on the first try.

I’ve had it for a while and hasn’t had any problems with tangles and keeps a good consistency through my prints.

Great prints, used it on bambulab P1S with AMS, works well in AMS in its original cardboard spool, no clogging

Fast delivery and good quality materia gives excellent printing. Highly recommend.

I always go for overture filament, and it never disappoints, it always melts well and sticks to the plate well, will definitely be buying again.

セール時にホワイト・シルクを購入しました。一見してわかるほど艶があるわけではないです。角度によっては安いホワイトABSに見えます。その代わり、かどうかは分かりませんが、シルクのフィラメントにしては安定性がよく、薄くてもボロボロにはなりません。普通のホワイトPLAと比べたら明らかにシルク感はあるので、ホワイトと組み合わせてアクセントをつけた造形はどうだろうかとアイデアを練っています。

I bought the matte white form of this filament to use making lithophanes. Overall it's a decent low-cost option, but it's pretty fragile and prone to slight delamination when working with thin layers. PLA+ filaments will definitely perform better, but the value for money on this filament is to me far superior