Please Confirm The Width of The Light Before Buy The Strip Connector. Features 1. Easy to install, no soldering needed when use to re-connect LED strip. 2. Connector type: 2 pin. 3. Material ( external ): PVC plastic. Installation Instructions 1. Ensure your section of LED light strip contacts both are clean. 2. Open the white clasp of the connector. 3. Insert the LED light strip into the clasp, under the prongs, making sure to match the + and - on the strip to the + and - on the clasp. 4. Close the clasp. 5. Gently pull on the LED light strip to confirm you've made a solid connection. 6. Your connection is made! Note If the LEDs flicker or do not light up, it is because there is poor contact between the connector and the LED strip. To solve the problem, please follow these steps: 1. Power on your LED strip. 2. Open all the caps of the connector. 3. Insert your LED strip into the connector, slightly pull and push your LED strip to adjust the contact points between the 2 copper contacts on your LED strip and the 2 prongs in the connector. If the LEDs still do not light up, please use your finger to press a little hard on the 2 prongs in the connector, until you see the LEDs light up. 4. This product is used only to conductive connection, want to fixed please to solder. 5. If you use this 1-2 Splitter to connect two light strip , make sure your power adapter is enough to run two light strips. Package 1 x DC jack connector. 1 x 1m extension cord. 1 x Inline On/Off switch. 1 x 1 to 2 Female Splitter Connector Cable. 1 x Cross shape strip connector. 2 x 2pin connector to DC adapter cable. 3 x T shape led strip connector. 4 x L shape led strip connector. 4 x 10mm 2pin led strip light connector wire cable adapter. 20 x 2pin gapless strip to strip connector. 30 x One-side fixing clip.
Trustpilot
2 months ago
1 day ago
