Club Car Precedent Golf Cart Suspension Kit - Front Lower Spring & Upper A Arm Polyurethane Bushings and Sleeves for 2004-Up Precedent, Replace Parts 102289901

Perfect fit for Club Car Precedent. While changing tires for family, noticed one suspension arm was just loose on the chassis pivot point (i.e. the bushings were no longer there). Searched for maybe a replacement arm, but suspect the generic arm would be as good as the oe arm. Then I came across this set of bushings! Much cheaper than buying replacement arms. It has all the bushings and sleeves to replace both ends of the suspension arms, as well as the end of the leaf spring. Parts looked good and instructions were nice. Found a video on youtube on replacing bushings as well. - Just need to remove the 2 bolts behind bumper to get that out of the way. - Then remove the 3 bolts holding the steering rack (left it connected to the steering column, but does require a second person to help hold it out of the way when working on the a arm chassis bolt) - Removed the 3 bolts (a arm chassis side, a arm steering side, leaf spring ends). I didn't have to undo the steering knuckle/joints, but did remove the shock lower bolts to get the shock pushed up out of the way - Def need pry bar to get the a arm out of the chassis. - Remove/replace old bushings/sleeves which can require some working with screwdrivers and pliers to get the old bushing/crud out. - Greased up the new sleeves and slid new bushings into place, followed by the other bushing. Tapping with mallet or gentle hammer fit the new parts in easily. Was actually surprised that it went in quiet smoothly. - Put everything back! The biggest trouble I had was lining up the a arm back at the chassis point, since it's not easy to line up the arm/bushings to get the long bolt to thread on the back (where the welded nut is). Thankfully had 2nd person help hold up the steering rack while trying to mallet the arm into position. Ultimately need multiple tries and using a long skinny screwdriver to make sure the holes are lined up from front to the back nut eventually got it to line up to thread the long bolt on. The other bolts for the outside end of a arm and the leaf spring ends were much easier. Took a while to get the one side done, but after that the other side went super fast with the screwdriver lining up the a arm to chassis points. Overall took about 2 hours being a first try. And the cart now sits up with tires straight up and down (vs. the one side tire cambered in severely where the bushings were missing before). Hope it lasts for many years, but I'll definitely get this set again if and when it wears out.

Good quality parts, fits perfectly in 2018 Clib Car Precedent. Front suspension is like brand new!! Highly recommended.

Great bushings. Long lasting and easy to install compared to rubber

Although when they arrived in such a small box, I wondered if I ordered correctly . I DID! These fit perfectly and since this was my first mechanical job on the ClubCar, it went easily. Instructions were easy to follow. This was well worth the money and solved my issue.

These are good bushings at a good price. Pretty easy to install.

Fit was good, and all parts were appropriate for this model

Works as intended, good instructions.

The quality is very good. This product seems to last a little longer than the otger brands I purchased.

Made the club car tempo i installed these on handle like a sports car, very stable even with a driver and 5 equestrian sport competitors on board.