LISEN 15W MagSafe Car Mount Charger, Magnetic Phone Holders for Your Car | [Dual Mounting Type for 99% Vehicles] Magsafe Car Mount,15W Magnetic Wireless Car Charger Car Accessories for iPhone 17-12

This has been working well. The magnet is strong and the adhesive hasn’t budged since I put it on a few weeks ago, even in the summer heat. I like that there are two options for where to attach the base. I’m not usually a fan of vent clips since they sometimes make it harder to direct air flow, but I tried it out and liked this one. The vent clip has a very good design. It’s not going to fall off easily, which my last phone holder did all of the time. It’s not difficult to take off of the vent when needed, either. That said, I still prefer the adhesive base. The charging function works well. How well it works depends on the cord and car adapter you use. I use the cord provided and a good quality adapter that works with this item, don’t remember the output off the top of my head but the output you need is listed somewhere in the product description. If your charger isn’t working, you should take a look at that first probably. The charging isn’t super fast but it does work. I like the glow, it’s not too bright so it’s not distracting. It reminds me of Tron. The picture I have is from when I was setting it up and testing out the vent clip. Not super great resolution since it was dark, but you can see the glow. The little nob on the top left of my dashboard is the adhesive base. Overall, good quality for the price.

ABSOLUTELY LOVE IT! I have both installed on my dashboard and also the vent clip hooked to my driver's side vent. The Magnet is very strong and very study. My phone might shake a little while driving but it still remains attached to the magnetic mount. I love having it right beside my vent and can just easily pop my phone right on and off easily. The provided charging cord is long enough to go around my steering wheel and hook up to the vent mount. If I'm not in need of charging then I can easily just unplug the cord.

The Good ----------------------- + Really strong magnet + Multiple mounting options (vent or adhesive) + Adhesive mount is very flexible in its design that would allow it to fit in a much wider array of places compared to others + 15W fast charging + Ring light on charger can be useful for finding it in low light settings The Bad ----------------------- - Haven't found any yet The Nitpicky ----------------------- = Took me a little bit to figure out that you have to rotate the base to extend the hook for the vent mount, instructions are mostly just a QR code for a video Thoughts ----------------------- I previously had an ESR magsafe charger for my car, but the plastic bit that connects the base to the mount broke and there's no fixing that. Not too broken up about it because the ESR charger was always hit or miss whether it would actually charge my phone or not. Sometimes I could be driving for 30-45 minutes and it would only charge my phone 1-2% when it wasn't even doing anything (no GPS, no CarPlay, nothing). I tried different cigarette port adapters, cables, with and without a case, even more than one ESR charging base and every time the same thing. Even across multiple phones when I upgraded my iPhone 12 to a 15. So this time I went in search of something different and settled on this. Only had a chance to use it on a single trip as of time of writing, but after I figured out you need to twist the base to extend/retract the hook for the vent mount, things went pretty smoothly. The magnet is pretty strong, so it won't be going anywhere during normal driving. Unlike the ESR I had before, this time even on a relatively short trip of maybe 10 minutes to the grocery store, it had already charged the phone by around 1-2%. As long this behavior is consistent, I'll be happy. I also prefer this vent mount to the old ESR one. The ESR was like a clothespin that you just "clipped" onto the vent flap, while this one hooks around the back and then you tighten things up so that it's pressing against other parts of the vent to provide additional stability. The adhesive mount is also interesting how it can be made to fit a much broader array of surfaces compared to most mounts. Suppose the drawback would be in finding replacement adhesive pads if you ever need them. Edit 2/8/25: Still so far so good. Unlike the ESR charger, where charging was hit or miss, this one is working consistently. I've noticed that, unlike with the ESR, I get the charging screen with the circular graph of battery charge every time I attach my phone to this charger. Edit: 2/23/25: Probably the last update as the device is still working well and I have no new issues with it. I don't usually like to drive at night if I can help it, but the light around the charger can be useful for letting me know where I need to put my phone.

This was recommended by a you tube review. I bought a couple of cheep dash board mounted phone holders and they were not good so i decided to do a deep dive and find something that would work . This is it, its the best bang for the buck that you are going to find. It holds my I phone great and it never falls off even when driving over rough roads, chuck holes etc. The phone magnets to the mount instantly there are no goofy clips or clamps to mess with. The mount between the vent and the phone charger pad is good quality and dose not come loose, it uses a ram style ball and that is adjusts easily, it is short so it dose not stick out away from the dashboard.The short profile is out of the way and it doesn't move around while driving . The built in charger works fine, its really nice that i don't half to plug the phone in to a cable. I just plop the phone down on the magnet and go. I installed the mount in my work truck but will buy another one for my car I would highly recommend this to any one looking for a mag safe phone mount.

Update #2: I received an e-mail from Lisen in response to my inquiry. The rep said to make sure the charger that plugs into the cigarette lighter has a minimum 20W output. In review of the Samsung "Adaptive Fast Charger" I was using, nowhere on it does it state the output wattage. So I borrowed an Ainope 36W charger and tried it. This completely resolved the problem. With the 36W Ainope charger, the phone now charges on the Lisen magnet Qi mount with no issues. I see that the instructions supplied with the Lisen Qi mount charger do state that the output charger needs to be a minimum of 18W. Conclusion: The Samsung charger I was using has an output wattage of less than 18, causing it to be incompatible with the Lisen magnetic Qi charging mount. I suspect that many of the other reviewers who experienced this same problem were also trying to use output chargers that have less than 18W. I have updated my rating to 4 stars. Minus one star because at the time of my original review, Lisen's hyperlinks to both their "support" page and to their "contact us" page took me to their product sales page, which was a bit frustrating. Otherwise the response and service from Lisen was great. As both a phone car mount and a Qi charger, this product is highly recommended with the use of a compatible output charger. Many older vehicles have lower output USB ports that won't work, and many older cigarette lighter chargers do not have enough output wattage to work. Back when I purchased my previous phone, a Samsung S9 Plus that came with the cigarette lighter charger I was trying to use, 10W was considered to be a "Fast Charger," but that is not enough juice to support this Lisen Qi charger. Update #1: I see that other reviewers have had the identical problem I am having. I used the Lisen product support link on Amazon, which takes me to the Lisen website *product sales* page (not to a support page). While on the Lisen website, I found and clicked on the "support" hyperlink. It also takes me to the sales page, not to a support page. Then I clicked the "contact us" link, which also takes me to the same product sales page... not to a contact page. I found a support e-mail address on the product box and sent an e-mail describing the problem. In reference to my original post, the Lisen phone number I called is the one posted on Amazon. I got an answering machine and left a message with my phone number and requested a return call. We shall see how this plays out. While my phone is mounted to the Lisen wireless phone charger Model 2E778, which is connected to a Samsung Fast Charger plugged into my car cigarette lighter, the charging starts, goes into turbo charging mode, then the charging stops a second or two later, then this cycle repeats over and over again never ending. The Mount attaches securely to my car vent. The magnetic mount is strong. If I can get the charging function to work, this would be a good product. I am using a newly purchased Motorola Edge + 2023 with the circular magnet applied to the outside of a Poetic case. The Poetic case has only a thin clear piece of plastic film on the backside and the circle magnet is attached to the plastic film. There is no thick plastic case that the charging has to penetrate through. Troubleshooting steps taken: I used the Lisen supplied USB cable plugged directly into my phone and the car charger. Charging worked normally with no issues. I placed the phone (in the Poetic case with magnet installed) on two different non-magnetic Qi chargers in my home. Charging worked great on both without interruption. I slid the backside of the phone around on the Listen charger to make sure I have correctly located the circular magnet and confirmed the magnet is correctly positioned and installed. If the phone is moved up, down, right, or left, there is no charging connection. On the sweet spot where the magnet is installed, charging starts, but then cycles on and off repeatedly. I called the manufacturer and left a recorded message explaining the problem and requested a call back. I will update this review if the problem is resolved.

Seems to work well, I like that it has a light on its edges. The magnet is good and strong, it works well with phones that have mag safe cases, or even the pixel snap phones works great with us too. One of the best car phone holders in my opinion. My wife loves not having to deal with weird clamping arms or things like that that hold the phone with most holders. You just kind of set the phone there and it sticks, then you remove it when you want quick and easy.

1 year in, and it’s still doing great. Mount has no issues. Very reliable—several other, cheaper products died within 1–2 months. This one keeps working. Powerful magnet, and my phone has never fallen off. No wiggling. Really like it. Already ordered the newer 25W one, also from Lisen. TY!

I didn't have a ton of hope when I ordered this, but my car doesn't have CarPlay and I don't like needing to hold/touch my screen in the car (in addition to it being illegal in my state). My goal was to get something that would hold my phone where I could see my map easily and keep it from ending up in the floorboard. The charging feature was just a bonus. I fully expected to use the adhesive mount that comes with this charger, but the vent clip has been amazing. I attached it on a small vent by the driver's side door that doesn't have any swivel/tilt function and it locks in place very well. I also installed the adhesive, but it was difficult to find a place given the curve of my dash. The cord that came with the charger was too short, but I used a longer usb-c to usb-c cord that I already owned. The setup was just as simple and probably more forgiving than other mounts I've used. The most surprising thing was how well the charger actually holds my phone. The magnet is extremely strong. I live in a rural/suburban area and the roads aren't exactly well maintained. This thing has stood up to massive potholes, train tracks, and a handful of road trips across six states without dropping my phone once. It keeps it charged when I'm running music and navigation; there haven't been any issues with overheating while charging despite the handful of +100°F plus days we've had this year. I'm genuinely impressed with this phone holder and I'm probably getting a couple more as stocking stuffers for friends and family this year. It would also make a good gift for new drivers who don't have carplay to view navigation directions.

good and strong when you use it as car holder

Excelente la carga no es muy rápida pero funciona bien...

جيد عدا ان الاسق ضعيف يجب شراء دبل فيس للتثبيت

Stabil und einfache zu installieren, sehr praktisch in der Anwendung

avevo comprato questo modello perchè uno dei pochi che oltre all'attacco per le bocchette dell'aria condizionata, c'era quello adesivo. Ma facendo un test, ho visto che il gncio per le bocchette dell'ac regge BENISSIMOm ha un sistema di bloccaggio diverso dalle solite mollette e regge perfettamente evitando di usare l'adesivo. Magasafe rapido in ricarica e magnete super resistente. Ricomprerei.