7" Touch Screen Digitizer Replacement for 2014-2016 Mazda 3 MX-5 CX-3 Infotainment Screen Replace Part Number BHP1611J0D & K40005A29F

Its a good product. Mazda doesn’t provide the display glass. So this was a saver. Loved it

It's a bit finicky to disassemble but installation seemed straight forward except noticed the ribbon cable was slightly off center when dropped into the bezel. This meant it couldn't connect properly to the head unit and touch was only partially registering. Luckily I had ordered 2 of these in case one of them got smashed during install and the second one was not misaligned. Just a word of caution to the manufacturer to do better QC to make sure the ribbon cable is properly aligned Everytime and not installed off center (it was noticable when we put the two replacements on top of each other with the bezels lined up) Once installed properly this new screen works perfectly.

Bought for my 2015 Mazda 3 sport sedan Mexico built fits and works perfect very clear and easy install

Installation was smooth. Screen is glossy, so you see reflections. Didn’t solve the problem of “ghosting” but looks nicer with the cracks gone. If I were to purchase again, I would look for a matte one.

As item description says, it fits 2016 mx5. Mine is a 2018 and screen looks the same so I took a chance. Well this screen has the 35pin plug but turns out my 2018 mx5 has a 50 pin. The 50pin is normally used on the later 8" screen and the 7" in the CX models. The 50pin CX 7" screens have a different contour and won't physically fit the screen cutout on the mx5. 2017+ mx5 could order a CX screen with 50 pin plug (if you must have touch functionality) and trim the plastic contour (a lot) to fit the mx5 by using the old screen as a stencil... Point is if you have a 2017+ mx5 with the 7" Bose radio, you, like me, have the rare screen used only by the mx5 and (outside the US) ~2016+ mazda 2/Demio. The correct screen is harder to get in the US, and must be ordered and shipped internationally for $100+ more than this one. This screen fits perfectly apart from it won't plug in anywhere so I unplugged my old delaminated one and installed this without plugging it in. I just wanted it not to look damaged anymore. I control mine with the remote control built into the center console anyway. Screen looks more transparent like a cell phone now vs when new; the car's screen was more translucent and matte colored. I'm happy. 5 stars for accurate description and good initial quality and fit. Been installed a week so far. PS- the gel from the old screen gets on everything during removal, so be prepared with alcohol wipes or in my case lint-free towels, microfiber, carb cleaner and glass cleaner. Carb cleaner also dissolves the old glue tape after scraping it off the mating surface with plastic scrapers.

this was a perfect match to fix the information screen on my 2015 Mazda 3 and it shipped so quickly. The extreme cold weather in Northern New Jersey caused the original screen to look like a frosted window around the edges and no longer allow the touch function to work. This replacement works perfectly and saved me a ton of money by having the local mechanic to replace the screen rather than the dealership.