6 Pcs DC Coreless Vibration Motors 7x25mm Micro Vibrating Motors 1-6V 8000-20000RPM for Electronic Vibration equipments and DIY Projects

Works as advertised no Problems yet. Look and feels appropriate. Reasonable

All units were clean and worked well, if a bit anemic. They draw about 11mA at 2.3VDC free on benchtop - up to 30mA when loaded down with my fingers.

I used these for haptic feedback on an electronics project. I had distributed them evenly around a belt and used some other devices to create a digital compass that always points to magnetic north. These are the second set of vibratory motors I purchased for this project. The first set were smaller disc motors that were not adequate for my needs. These worked super well and always provided feedback I could sense. I've heard that they can die out quickly if powered for too long. For small bursts of haptic feedback they seem to be a perfect fit and have not worn out. I also found that they all seem to provide consistent output. Sometimes motors outputs differ greatly when dealing with small motors like these.

These are great and they work

I haven't Had these for more than a day, so I cant say how long they last. I plan to use these in small stuffed toy mouses for cats that will vibrate when the cat plays with them . Im unsure about some of the other reviewers that claim only a few worked. Thats why the first thing I did was test them all and they all worked great from 1 volt to 9 volts as they are designed to work at 3 but are given rating 1 volt to 6 volts but at 9 volts the one I placed aside for testing at 9 volts continuously worked for the 30 seconds until I turned off current and it was the fastest vibrating motor I've owned and the decibels didn't change, just the tone changing from low hum to a low high pitch sound if they burn out quickly at the 3 volt recommended by manufacturer that I will be using these at, I will Update this review.

Can him up a terminal battery and get peizei electronics with a battery him up red + to plus black neutral cable or ground to -. Works like phone vibrate a little outside a case.

For customers who ask, "what do i do with them", um, consider the adult toy sector and you will have you answer. Let's just say that *waterproof* is your clue ;) Happy creating.

All the motors work perfectly, wires are very slim as it doesn't draw too much juice. Powerful vibrations. Would buy again

I work a lot with molds. I use resin and plasters which need to be shaken down to get the bubbles out. I have tried all kinds of vibrators attached to the leveling tables I use, but each had their own issues, mostly the noise. I thought maybe these six mini vibrators might be enough to get things going, but I was wrong. All I needed to use was two of them. These little gems are a lot more powerful when it comes to vibration than they look. So don’t let the size fool you when you first see them. The construction is quality and yes they are very waterproof should you need to use them under water. With a variable power source you can easily adjust the amount of vibration you get with these. I find the best is around 4 volts. I use a very micro thin piece of silicone that is 2ml thick that I made to fit the vibrator to silence any noise as it hits the metal 2 foot square table I am using. Finally, with just two of these little guys I am getting perfect product from the molds. The frequency of the vibrations is very fast which won’t give a thumping sensation. The wiring coming out of it is very delicate so you need to be careful as you could snap them. I work with a lot of 22 gauge wire so I know they are delicate. But the way it is connected makes sure it won’t come off the connection to the motor. I would definitely recommend these vibrators mostly because they can be useful for so many things. I know these are going to last a long time and I don’t think I will need more. However, if I need a different type of larger one, etc., I am definitely going to be going to this company for them as this is pure quality.

My title seems negative but it is merely me stating that I lack the creative prowess to find a decent purpose for these. However, the motors work perfectly fine and are variable in power. Its speed adjusts depending on how much voltage runs through these motors. From the postings, the most realistic use case I have for these would be the bristle toothbrush or vibration motor robot.

These motors are very well built and impressively strong for their size. While they were a bit too powerful for my specific project, which involves a model turret, they performed excellently when tested with a variable controller at different voltages. The responsiveness of the motors was quite impressive. One standout feature is the sealing quality. For fun, I dunked one underwater, and it worked just fine. I even bent and moved the wires at the base to check for any gaps where water might enter, and there were none. This level of durability is a bit more than I need for my project, but it's reassuring to know how robust these motors are. Pros: - Strong performance and responsiveness - Well-built and durable - Excellent sealing, even underwater Cons: - None identified In summary, these motors are a fantastic choice for anyone needing reliable and robust options, especially in environments where durability is key.

These little motors do vibrate pretty good, you can control the levels of vibration by controlling the voltage with a voltage regulator or similar product. I find that once the voltage gets above 6 the motors start to heat up, and at 8 to 10 they heat up really fast and very hot... don't go that high... I didn't test higher because I knew they'd burn out. They react kinda different at low vs high volts. They bounce around at some voltages but stay static and just vibrate at other voltages. So you can really modify and tweak what results you're going to get depending on what your plans are. The wires are VERY fine, so be careful with them. So if you're building your own wearable massager these should work great for you. Just have to get the right voltage control and secure the motors to ensure that's no stress on the wires.. I could see a lot of other uses too, like keeping powders flowing in a dispenser. Arts and crafts could use them to make things move... Anyways, they work well, and at lower voltages I think they'll have a really good life span.

The motors work well but wires at the motor break easily,one came already broken other than that good vibration