TONORMicrophone Boom Arm, Low Profile Mic Arm, Fully Adjustable Mic Stand with Desk Mount Clamp,Screw Adapter, Cable Management, for Streaming Gaming Podcast Studio Recording Home Office T40LP Black

Didn't like the stock arm that my mic came with, wanted a low profile one and it satisfied my expectations. Strong and easy to adjust. Can loose screws to make it easier to move the mic are out of your way when watching a youtube video or when not using the mic. Solid option and couldnt recommend more.

This boom was exactly what I was looking for to add to my home office. It can be nicely tucked away when not in use and doesn't get in the way when using. I've attached my RodePod Mic to it. That microphone is a heavy one and the boom arm can handle it. I would recommend this product to anyone, especially if you're looking for a new boom arm for your office.

This is an great boom arm and I'm very impressed with the value. The movement of the arm is super smooth and the assembly took less than a couple minutes. I do wish there was control over the horizontal movement at the joints, only because I wanted to place the clamp sideways and control the boom arm vertically. I can't do that because the tension knobs only secure the individual moving arms from falling out, but not from moving. This Is sort of a niche placement, so I don't fault the product too hard, but I do believe that it should at least be an option. Having said that, I think this is a excellent beginner boom arm For the vast majority of people out there and I can't wait to make billions with it. Maybe millions. K, just some spare change, I think is probably a good goal to start. Whatever your end goal is, I think you'll be happy with this boom arm!

I got this as well as the needed accessories to modify it to hold my phone to film demo videos and live stream as well. It's a solid, high quality arm and easy to adjust. The clamp hold securely and hasn't slipped on me. I don't have a microphone but the level of adjustability works for that height and the one I ordered it for. I'm very pleased with it so far and look forward to using it for a long time!

I got a Focusrite bundle from another retailer and it came with a great condenser mic (CM25), which is not exactly lightweight. I was a little worried that the arm wouldnn't be able to hold the mic, but it holds it in any position I set.

This low profile boom arm is just what I needed! I have a very small desk so space is at a premium, and this arm has av primary arm that's fixed to swivel at a low profile, and a secondary arm that fully articulates. It's like this was made for me and my setup. Absolutely excellent quality, easy to install, and works beautifully.I highly recommend this excellent product!

I recently purchased the TONOR T40LP Microphone Boom Arm for my home office setup and I couldn't be happier with my purchase. This low profile mic arm is perfect for streaming, gaming, podcasting, or any kind of recording.The design is sleek and doesn't obstruct my view at all, which is a big plus. The sturdy metal construction ensures stability and durability, and I love that the bottom clamp has a large contact area for smooth arm movement.I also really appreciate the rotatable and adjustable features of this mic arm. With 360-degree horizontal rotation and 90-degree vertical adjustment, I can easily position my microphone exactly where I need it. Plus, the cable management system with included cable ties keeps my desk tidy and organized.Overall, this mic boom arm is high quality, versatile, and compatible with any microphone. If you're looking for a professional recording experience, look no further than the TONOR T40LP Microphone Boom Arm. Highly recommend!

I use this mounted on a standing desk, but it pivots to my sitting height work table too. It has enough range to go from regular sitting height, to sitting at the standing desk, and standing.The table clamp is fairly standard. Has rubber pad on the top plate, and a cover on the bottom clamp surface. Opens to about 2 5/8" (6.7cm).The swing pivots are simple. Just a metal post, plastic sleeve, and metal hole; then there is a knob/screw to press on the plastic sleeve and provide some retainment and friction.I don't like the microphone holder pivot. It is narrower than the parallel arm spacing so it bends the metal plates inward. Feels like they forgot to include suitable spacers. I added a couple thick washers, finicky to assemble, but it works a little better.The parallel arm was adjusted quite tightly from the factory. The parallel arm is not spring loaded. I couldn't move it without supporting the pivot arm in the middle. You can adjust the tension on it by removing the cosmetic round metal covers with a M3 allen wrench, and loosening the 7mm nuts on both ends.

Ce low profile permet de ne plus être gêné visuellement lorsqu'on utilise plusieurs écrans. Il se glisse sous des écrans, ou sur le côté du bureau, est très souple, comporte des porte câble, bien meilleur que mon ancien pied au même prix.

The quality is good. I would say value the money.

Por un precio bastante inferior este brazo aguanta micro y camara sin ningún problema, el sistema de fijamiento con llave de alen puede parecer molesto, pero desde que lo he comprado todavía no he tenido que volver a ajustarlo. Se adapta perfectamente y se queda en la posición que le pones. Y ya está, no quieres más en un brazo.

This arm really stands out from others. With it staying flush to the desk it’s looks a lot cleaner. Movement on the arm is also really smooth. Plenty of attached cable management ties also included. Solid buy for the money

Se trata de un soporte de micrófono muy sólido y resistente, que se convierte en el accesorio ideal cuando no tienes buenos ángulos desde los laterales de la mesa donde anclar un soporte de éste tipo, y de repente es una muy buena opción tenerlo desde la parte trasera de la pantalla.Se presenta en un embalaje sencillo pero con los accesorios necesarios para su montaje, incluyendo un manual de instrucciones, 4 bridas de velcro con el logo de la marca para la gestión de los cables, y una abrazadera sencilla para micrófonos de mano convencionales.Es de un precioso color blanco con un ligero efecto brillo en la parte inferior, y un efecto un poco más mate en la parte articulada, habrá que ver qué tal va de resistencia a arañazos, aunque de primeras, se ve bastante resistente.Se siente sólido y resistente, y aunque es algo más pesado que otros soportes, es perfectamente comprensible y justificado, ya que por la disposición tan diferente que tiene, es capaz de soportar hasta 1,5Kg, por lo que no habrá ningún problema en instalar prácticamente cualquier tipo de micrófono con algunos accesorios extra.Lo realmente interesante de éste soporte, además de su magnífico color blanco y calidades de acabado, es que la parte inferior del brazo que va directamente conectado al anclaje, gira 360 grados sobre éste, y tiene una extensión de 77cm, lo que lo hace ideal para traer el micrófono al frente desde detrás de los monitores, permitiendo ahorrar espacio, o resolviendo posibles problemas de posicionamiento sobre la mesa, cosa que normalmente con uno común de tijera, a no ser que tengas una mesa con muy poca profundidad, sería impensable.Por ponerle una pega, las pocas piezas de plástico que tiene, no parecen muy resistentes, ya que recuerdan un poco a las típicas piezas de baquelita de los años 80/90, pero de momento cumplen con su función perfectamente.