Mondazie 10-20 Gallon Fish Tank Stand, 24" L x 12" W x 20.5" H, Black | High Rimless Aquarium Stand with Shelf for Storage, 2 Tiers Breeder Tank Turtle Reptile Terrarium Stand Rack for Home Office

Was looking for a shorter stance and this was the only one I found. I knew my 10 gallon wouldn’t fit based on the measurement cause the width is little bigger so I knew I had to get a plywood cut. It came out perfectly. For the price, I think it was worth it. Once the fish tank is set up, the stand should hold up better.

great stand. easy to assemble. feels very sturdy but not too heavy. it was a perfect fit, doesn't take up too much space.

I'd like to say that I did check the dimensions of this stand...to make sure my tank would fit (20 gallon tall). It does. Perfectly. However I did not check the height in it. It is shorter than I'd like but it is way sturdier than my other one (the shortness actually worked out better in the end) This one is for my hermit crabs my other one is for my fish. I was debating buy a second for my fish tank but I won't as it's so short. It is in line with my night stand (if that helps). I've given it 5 stats because it's so sturdy, it was easy to assemble and my tank fit it. I really wish they had on that was taller as I would be buying second if they did.

It says it holds a 30 gallon, I got a 29 and it was “to big” So I put 3 washers on the outer screws and I put nuts on the wide side, then it worked Very good looking, very stable, and affordable, but not the exact size fit

Bought this stand to put our standard 30 gallon aquarium that houses our red eared slider. Unfortunately it is about 1/2" to short and narrow so I cut a piece of 3/4" plywood an inch bigger then the tank and placed that between the stand and the aquarium. Unfortunately the stand seems very wobbly (aquarium is only 3/4 filled) so we will be finding a new aquarium stand to use.

I read numerous reviews about this stand before purchasing with many noting difficulties constructing the stand. First, this is a very solid stand when built correctly. Second, I can provide some helpful advice to the build process to make it easier for the 20 gallon stand - I built it in about 30 minutes with some careful planning. To build this stand without spending 2 hours cussing and questioning your sanity you need to open the box and find the directions before anything else. I found the direction booklet wrapped to the pieces of wood that create the lower shelf. Look at the picture of the stand and this will help make sense of my suggestions. Open the directions and study them for a quick minute so you have a basic idea of the parts you’re unpacking. When unboxing you will notice various pieces shrink wrapped together. KEEP THESE PIECES TOGETHER!!! If you throw them all in a pile you will slow your progress and become flustered because some parts have subtle differences. Pay special attention to the amount of holes that are in each piece of square tubing. 2 pieces of square tubing make a full length tube for the length of the stand. Okay, you have your parts laid out and organized as a group by how they were wrapped together. Find the 2 bags of assembly parts. One bag contains the bolts and the other the adjustable feet. Sort the bolts into the 3 sizes provided. Let’s build! Find the hex key tools for the screws in the screw bag and follow the directions. Any 2 pieces of square tubing that needs to be joined together with 2 screws to make a full length tube - you will need to assemble these by making the connection joint as tight and square as possible to each other (this will save you numerous headaches later in the build and keep the stand square) and set them aside while you’re working thru the build steps. You will construct the end pieces first, then the bottom shelf, you finish building with the top shelf with the metal tube grid. You need to keep everything square so the pieces fit together. Any screws in the end pieces start by screwing them finger tight. Following the build process and attach the wood pieces to make the bottom shelf. Line these pieces to be as square as possible and tighten them down solid to create a square base. Is it square? Perfect! Now go back and tighten all the screws at the ends to firm up the stand. Next, you’re going to build the top shelf. It’s basically the same as the bottom shelf but instead of the wood pieces making the top square the tube grid the fits inside the top tube frame will make the stand square. Make sure each screw tightens down evenly over the entire top. If you have gaps in the joints the stand isn’t square. Once you’ve constructed the stand check every bolt again to make sure everything is tight and draws all the connections together. Now, sit back, have a beverage of your choice, and marvel in your construction skills!

Fits nicely and seems sturdy. I’ve had it for a couple of months now and it looks great. I read all the reviews before buying and it seems like people are just not reading the listing. It’s for rimless tanks so if your tank is not rimless it will overhang a bit. It’s also not that tall but again, read the listing and you will know that before buying. I also got the 20 gallon one as well. That one is for a 20 gallon HIGH tank not a long tank so the dimensions would be way off if you dont have the proper tank. Hope this review clears some things up for people looking to buy.

This aquarium stand is perfect for my tank! It is just the right height. It is lower than other stands, but that is what I wanted. Make sure you look at the dimensions before ordering. The instructions for assembly lack clarity and I did have to redo some parts. But it is sturdy once assembled. Overall a great product.

Great quality and look, very sturdy and simple to put together.

ممكن يكون افضل تحتاج الاعمده الي وزن افضل من كدا ، لانك ادا وضعت الحوض فوقه سترى عدم اتزان في اعلى الاستاند بشي بسيط لكن بالمجمل جميل وقوي وانا احتاجه لحوض التيراريوم النباتي فقط بدون ماء بالحوض الارتفاع ممتاز ادا كنت جالس علي اريكه او كنب ، مشاهده ممتعه .

To say all the bad reviews this product as I have bought it and I would have to say the reviews I've seen and not all right as my tank fits it perfect as I measured my tank and the strength of the stand is pretty well strong it's stronger than a wooden stand I would recommend this to anyone that has the right size tank for it

Está súper bien y es fácil de armar. Es bastante bajo pero queda muy bonito. Lo que me decepcionó es que en la foto dice que mide 12 pulgadas de ancho y en los detalles del producto dice 47 cm, y no mide ninguna de las dos!! Mide 13 pulgadas, la verdad es que me arruinó mis planes porque había mandado a hacer una pecera a la medida basándome en las mediciones que venían en los detalles del producto y pues 47 centímetros nada que ver, es mucho menos ancho. Básense en las medidas que viene la foto, no lo regreso porque si está muy bien todo lo demás pero me dificultó muchísimo todo que los detalles no estuvieran acordes al producto.

Honestly not the best quality. I set it up and had no trust that this would actually hold up my 16 gallon tank... let alone a 20 gallon that its supposed to hold. I missed my cut off to return it so I donated it to my local thrift store. I do not recommend this product to anyone.