BrosTrend 5GHz 867Mbps WiFi Bridge Point to Point Outdoor, 1KM Wireless Internet Network Bridge Long Range Plug & Play, for PtP & PtMP, IP65, w/Passive PoE Injector, for Barn Farm Garage Building etc

Impressive Performance and Easy Setup!I recently purchased the Bros Trends Bridge, and I must say it exceeded my expectations. The setup process was incredibly straightforward, even for someone without advanced technical skills. Once installed, the bandwidth performance was excellent, providing a stable and reliable connection. The device has proven to be very dependable, handling multiple tasks seamlessly. If you’re looking for an efficient and hassle-free solution, I highly recommend this product!

Setting up both the receiver and transmitter is a simple process with easy-to-follow instructions. The PoE Bridge included eliminates the need for two separate cables, streamlining the installation process. I have been using it consistently, day and night, and it has been performing exceptionally well.I know that these items are designed for outdoor use, but in my opinion it would be beneficial to place them under the eaves of a roof for protection from the sun and rain. This will help to prolong their lifespan and maintain their quality.

This bridge set allowed me to hook WiFi cameras up on my barn without having to run a lengthy cable to my barn 150 ft from the house. Bridge was easy to install, and camera was easy to hook up to bridge.

First, I have been in IT for over 25 years. I generally use another brand that starts with Ub...., but the price and claim of 867Mbps in the title got me. I needed to point to point to go to an outbuilding I have so this looked like a great option. Well, it's not. The units use 24v POE versus 48/54 like most POE switches put out so you have to use their included injectors or plug in the power brick to the unit. Or, you could get some 48v to 24v converters which was my option. Well, that didn't work because one of the units won't work with the network cable only powering it, so I have to use the power brick plugged into the unit, which is not a possibility for most anyone. The other unit didn't work that way and worked as it should. So, I ran the power in a test situation to power everything up in their actual locations and the units wouldn't pair up. My run is about 2000 feet with a clear shot. So, I took the units and set them up next to each other and they still wouldn't link up. I tried resetting them, no go.I sure wish I could have got them working so I could test their 867Mbps speed claim, one which is impossible to achieve over the 100mbps network. There is no way to get over 100Mbps on a 100Mbps connection. So, in theory, this unit would be pretty slow in today's standards.

Been thru several bridges because of lightening. Even grounded according to instructions. Anyway, this unit was the easiest to install. Definitely plug and use. It has worked perfectly ever since.

***After the glowing review below, the receiving side started dropping out about once per day. Have to reboot the POE for the receiver side only, easy but very annoying. Tried resetting as help desk suggested, didn't help. Now they want me to install a system log to monitor it. Haven't done that yet, and didn't really plan on having to troubleshoot a new system. We'll see how that goes... ***I had a Ubiquiti system that got taken out by lightning, so I bought this cheaper, less complicated system to replace it. THIS SYSTEM IS TRULY PLUG-N-PLAY! The units are already sync'd to each other, and once you turn them both on and THEY JUST WORK. Zero loss of internet speed over the 200ft distance. And they cost 1/3 what my last system cost.My previous ubiquiti system I'm sure had better specs, but I don't need 10km range. I need 200ft. The problem with the "U" system and many other point-to-point systems is they are very difficult to configure. I spent HOURS with the "U" system settings up nerdy details of IP addresses and subnet masks, etc. I'm pretty knowledgeable about such things (but not an IT guy) and it still was difficult. This BrosTrend system is how they all should work for a simple residential system. Truly PLUG-N-PLAY. I highly recommend it. And if it dies due to lightning, it only cost $70, not $250.

We used this at a ranch where the garage is about 100 yards from the main house. We use starlink for our internet access and used this to extend our range. Works like a charm. We get about 60Mbps at the garage which is about 60 times what we used to get! Super easy setup. Worked on the 1st try. Be sure the antennas face one another as we found the bandwidth was significantly hampered by tilting the transmitter too high. We tried all sorts of other repeaters and mesh networks which were not nearly as effective as this and all the other stuff was more expensive. Definitely reccomend.

I purchased the bridge thinking I could connect two of my wireless nodes that I have located in different buildings.That will not work! But if you are hard wired on both ends of the bridge, it works flawlessly 😎

This is the third type of device I have purchased to get internet to our barn. After four months of use, I can say this is the most reliable device I have come across.

Hätte nicht gedacht , das dieses Teil so gut funktioniert.

Nella casa nuova non avevo la possibilità di installare la fibra o eolo, fortunatamente queste antenne mi hanno salvato.C è da dire che serve una visuale libera del tetto in cui c è la stazione principale.Il funzionamento è semplice , un' antenna ( la stazione) va montata nella casa dalla quale si vuole inviare il segnale, mentre il ricevitore nella casa in cui si vuole portare internet.Per praticità di visuale io ho installato le 2 antenne nei rispettivi tetti, portando internet tramite un cavo lan dal piano sotto.È importante che la visuale tra le 2 antenne sia libera, funzionano benissimo anche in caso di maltempo , ma non in caso di visuale ostruita da oggetti solidi ( anche i rami mossi dal vento possono dare dei disturbi al segnale).

Après avoir tenté en vain d'installer un modéle complexe à installer, UBIQUITI LOCOM 2,sans notice en français et sans mode d'installation simple et rapide, après avoir ainsi retourné le produit, j'ai acheté la marque Bros Trend modèle EAP2..et là, le grand bonheur avec une notice en français claire pour une installation rapide et efficace doublée sur le site Amazon d'un film de procédure de mise en route !..que du bonheur

Este puente Wifi de Brostrend lo he probado en casa, ya que necesitaba una WIFI potente, así como de una casa a otra, que es lo que andaba buscando, y la verdad que me ha sorprendido bastante. Porsupuesto no busques milagros, ya que el puerto de red solo es de 100mb, Velocidad que he conseguido en el interior del domicilio atravesando varios muros.En exterior es necesario que las dos antenas se vean, para una mayor conectividad y velocidad de comunicacion.Es facil de configurar tanto el receptor como el transmisor. Te guia paso a paso cuando lo configuras. Viene con el Puente PoE para que no tengan ue salir 2 cables de las antenas (el de datos y el de la fuente de alimentacion).Lo tengo funcionando día y noche y por ahora funciona muy bien.Te vienen 2 Bridas de plastico para sujetarlas bien en exterior, asi como los tornillos para sujetarla en una pared.El cable de las fuentes de alimentacion es corto, por lo que veo muy util el puerto PoE, porque asi puedes poner un cable de red tan largo como necesites hasta el puerto. Con el cable que viene de red, a mi me ha sido suficientemente largo para instalarlas.Tambien comentar, que intenteis ponerlas en un sitio con sombra, porque la exposición directa al sol, y ahora en verano, las puede deteriorar, ya que son de plastico, aunque en las especificaciones refieren que aguanta temperaturas altas.En el espacio de conexion de cada antena, viene un interruptor de Reset, por si alguna se bloquea, y todo tapado por una tapita extraible que proteje las conexiones del polvo y agua.Buena compra en general. Me da lo que necesitaba. Buena calidad. Y la conexion es estable.