FEIFANKE 135A Flux Core MIG Welder 3 in 1 Portable Welding Machine | 110VOnly, Gasless MIG/Lift TIG/Stick, LED Display, Synergic Control, Beginner Friendly, IGBT Inverter, Auto Repair

I’m a master carpenter and a decent sheet metal fabricator, but I’m a complete novice at welding and it’s way past time for me to learn and get good. I purchased this welder after reading tons of stellar reviews and seeing what all was included for this unbelievable price. In fact reading the reviews and seeing the price had me wondering if there was a mix up in the listings. However this little welder is absolutely legit. It comes with a mig torch, wire, a stick holder, and rods. And they all worked great. Just playing around on random pieces of metal lying around the house, I was able to lay down nice beads with the wire and start and maintain arcs and create functional welds with the rods. The stick welds had nice even layers of slag over them that chipped off clean and the mig welds came out like those “stacked dimes” you want. I’m working on getting the required accessories to use this with tungsten as well, as tig welding stainless steel and aluminum is my main objective. Given the versatility, usability, and quality, this thing is just an exceptional value. It’s lightweight and super portable. While it ran off a standard 15 amp 110v circuit just fine, the manual states that it is dual voltage and can run off 240 with an adapter. I plan to install a dedicated 30 amp 110v circuit at my house to run this, and that will more than suit my needs. It looks well built and should be plenty durable if I take good care of it, and I like the orange color. All I can say is that this is an incredible tool for the price, and I couldn’t imagine a better entry level welder. Honestly before this came in my only experience was with a harbor freight wire feed, and it was completely useless. This one costs less and actually works. I’m simply amazed. This is an excellent first welder for me and for anyone else, and anyone looking to learn an extremely valuable new skill on the cheap shouldn’t hesitate to buy this.

I recently picked up the FEIFANKE 135A Flux Core MIG Welder, and after putting it through a few repair and fabrication jobs, I can confidently say it's a great value for the price. Here's a breakdown of my experience. The 135A output is more than sufficient for light to medium duty tasks and durability. I've used it on mild steel, and it handled everything from sheet metal to small brackets without any issues. It's a 3-in-1 machine (MIG, Stick/ARC, and Lift TIG), which gives you flexibility without needing multiple welders. The synergic control is a big help for beginners. just set the wire thickness and the machine adjusts voltage and feed automatically. Out of the box, setup was quick and simple. It includes a 1 Lb spool of .030" flux core wire. The included MIG torch and 5 stick electrodes, so I was welding within 15 minutes. The design of this welder machine is so good, and the controls are intuitive, and switching between MIG and stick is a breeze. The 110V input means it works with standard household outlets super convenient for garage work and especially with its stickiness and durability quality finish. The FEIFANKE 135A offers excellent performance, it's compact and lightweight, yet the IGBT inverter tech gives it a modern, efficient feel. The cooling fan kicks in as needed, and thermal overload protection adds peace of mind.

Good basic light use welder. Works great for my needs and seems durable so far. Works great for small projects and easy to store. Made a guard for my older tractor and patch welded and installed muffler. Works great so far. Good value for the money! Worth it!

I'm in love with this machine, I named my Al-pen I haven't welder since highschool and am an independent mechanic. I had a job that required removing and rerouting exhaust tubes and so I purchased this machine. It's wonderful value and works extremely well. I've found that the flux core can easily handle 1/4" plate and exhaust tube with no problems. My only complaint is the non-adjustable wire speed, this generated a rough learning curve but ended up with a machine I couldn't be happier with. I have burned through a whole spool of wire and 3 sticks just bc I've loved the experience provided so much. The torch did get a little warm with extended use but at 135a the durability held up to repeated use. The penetration was slightly lacking on the lower range of amperage but it can make some really pretty welds. The provided sticks are difficult to strike and burn really quickly, often getting stuck to the plate if the angle isnt exactly right. Update I've mastered the arc but burnt up my grounding clamp

I had a small welding job where I needed to attach a handle to a safe. When I got a quote for almost $200 for such a simple task, I thought to myself, ‘It can’t be that complicated.’ That’s when I decided to take matters into my own hands. I started researching welding machines, reading reviews, and watching videos on how to weld. Eventually, I came across a machine that had great feedback and was available at a very reasonable price. Despite having zero experience with welding, I decided to purchase the machine and give it a try. When it arrived, I was impressed by how straightforward the setup was. I followed the instructions that came with the machine step by step, and before I knew it, I was welding for the first time in my life. To my surprise, the process was much easier than I expected! The machine was very user-friendly, and with a bit of patience, I managed to attach the safe handle perfectly. It was very light weight and easy to move around. Quite powerful for its size and functionality. Not only did I save myself the $200, but I also learned a valuable skill in the process. The sense of accomplishment I got from doing the job myself was incredible. I highly recommend this welding machine to anyone, especially beginners. It’s affordable, easy to use, and makes small tasks like this a breeze.

Good basic welding for the price 🤟

If you're a complete novice first time welder like me and don't know where to start this is a good choice. I initially bought a "stick welder" off Amazon and struggled mightily using it as it was hard getting an arc and the rod was sticking a bunch. The point and shoot usage of mig is much easier and effective. I used this thing yesterday for the first time and it arcs and welds everytime. If you're looking to just get in the game of sticking metal together I'd recommend one of these cheap gasless migs. It was a little bit tricky getting the wire spool installed as I didn't realize the spool itself is spring loaded and it unwound on me when I opened it which requires some backtracking.

lasted an entire 15 minutes, wire welded some thin 1/16 inch plating, stick welder just glows entire electrode orange, clean ground contacts, no go! save your money

Bought it initially for one car repair. Works well and seems like a good unit. Takes some practice and research to get a feel for the settings. I believe this is meant for thinner metals, but it will burn through anything pending your settings. A 10-year old could probably have done a better job than I did, but it worked and saved me some $$$$ in car repairs!

its my first time for welding, very easy to setup, finish the welding in 10 mins on my bird cage，This small welding machine is genuinely impressive. It’s compact, so it’s easy to move around and fits well in tight spaces. Despite its size, it produces solid, clean welds that hold up nicely, and it’s straightforward to adjust for different materials. Perfect for DIY tasks or quick fixes, it’s reliable and does the job without fuss.

Works awesome on lite welding jobs

I bought one sometime ago, just got to use it this week the reviews are correct, great little welder for the money. No complaints.

I am new to use this kind of welding machine. This is a very handy machine and very easy to learn and to use. I need to weld two reinforce bars on my hitch mounted cargo carrier. It took me a few minutes to assemble it. Then I just follow some videos for beginner on YouTube and tried on a piece of metal a few times. Once I felt good, I started welding on the cargo carrier. It was easy to adjust wire tension and power following the videos. Finally I was able to weld the reinforce bars on my cargo carries successfully, as well as welding a few other places in my yard. The mig torch and feed are smooth and easy for a beginner to start to learn and to use. Super worth of buying it!