DIY Doctor XL Heavy Duty Double Sided Carpet Tape - 2 Pack (30m length x 50mm width) – Secure Rugs & Carpets on Any Surface – Long-Lasting & Reliable Grip

Easy to use, holds well, yet can be removed when needed, and it did indeed leave no residue when we had to remove a strip to reposition things. It's sticky stuff, but comes back off in one piece when you pull perpendicularly. It is nice and wide as well, so you can get good grip across a large area with one strip, and there's plenty on the roll to handle many steps, or many edges, as needed. I'm very pleased with it so far.

This stuff is awesome and worked a treat on my mums carpet. She has a join where the carpet meets the bathroom wet room floor and the silver metal runner has bowed and finally come off. This has caused the carpet to start to fray and lift a bit. I looked around to see if i could find something to tired her over whilst we sourced another metal piece and this came up. It's a cinch to use. Clean the soon to be stuck area and allow to dry. Cut to size place carefully under the clean dry carpet and stick. Then peel off the paper and stick the carpet to that firmly. Solid adhesion, i did make a small error and it's easy to rip back up and rectify. It has now had several wheelchairs over it, a vacuum cleaner twice and it is still rock solid.

Strong sticky and easy to put on back of rug.

Very happy with this purchase. Plenty of tape to stick down rugs and stop them sliding around on the floor. Did three rugs and still have loads left. Worked well on both wood laminate and tiled floors. Lifted rugs to steam floors and restuck rugs back down onto tap without any problems. Easy to cut and position which doesn't need to be perfect as hidden. Although I'm confident the stickiness will last for a long time, I have enough left over to do all rugs three times over. Thinking what else I can stick down 😁

The best double sided tape ever. I used Sbr to prime my concrete floor, then used this tape at the top end of my vinyl peel and stick tiles, I then used a blow dryer on the whole tile before removing the backing of the tape. once it went down, that was it.. glued down so fast when I tried to remove one tile that wasnt laid properly, it came off with the cement from the floor on the taped end and it was hard to remove the tile. For those struggling to cut the tape, I just scored the length I wanted with a sharp knife first, then I put the roll between my thighs and lift the tape away from the roll. when it gets to the scored part, I just use the knife to cut through to separate the piece I want from the roll. no danger of cutting yourself and it came away good. The size of the roll good, I was surprised. the glue holds very well and I'm sure it will last a very long time.

Has done the job and secured the rug to our LVT flooring. Perfect

This tape is strong, but I don't recommend it for woodworking. It's quite sticky so it can damage veneer and leave residue on rough surfaces (you can see both in my photo). It's also fairly thick and rubbery, so if you use it to hold a fence piece for sawing or routing, it will have too much give. So although I'm keeping my roll for general DIY use, I've since bought a specialised woodworking tape which is thinner and less sticky and much better suited for that job.

Great product ,sticks anything down. A great buy