Question 1

New carb starts right up, but bogs at full throttle.  checked exhaust port and all is well.  no adjustments that i can see.  any advice?  thanks!

Accepted Answer

Had the same issue,it's the high rpm adjustment under the gas lines and bubble.qtr turn clockwise and mine runs like brand new,check the images and videos on the product description for locations of adjustment screws

Question 2

Installed this, adjusted screws and it will start but not run smooth. Removed, reinstalled and still no good.  Any thoughts or am I simply out $15 ?

Accepted Answer

Almost every carb I have bought from this company has worked flawlessly out the box. I only adjust if engine does not run right. With that said, you didn’t say if it idles or it does not rev up to speed so it’s hard to say what needs adjusting. YouTube it again. The machine needs to idle before anything. 1st, adjust the trigger throttle so the machine will idle. Turn the screw clockwise. Even if it idles rough. Then, turn the low idle screw all the way in. Back it off about 1 1/2 to two turns. The machine will idle. Keep backing it out until you get a decent idle. Then back off the throttle screw so it idles down. After this, do the same for the high idle screw. All the way in and then back out the same as the low idle screw. When you squeeze the trigger, keep backing the screw out until the machine revs freely and doesn’t bog down. As someone pointed out, the screwdriver for this is a micro head flat blade. The spark plugs included in these kits are not always the best so you may need a quality name brand. Also check that the gaskets are installed correctly. Otherwise the carb will try and pull vacuum from a ripped gasket and won’t run right. Good luck

Question 3

Is the reed included

Accepted Answer

Everything you need to bolt this carb on is included. I don't recall removing a Reed from my SRM 210. This carb was a direct bolt on to the intake.

Question 4

Does the carb have high and low adjusting screws?

Accepted Answer

It has a low adjustment screw. The high appears to be adjusted by the brass part where the cable comes in. It’s identical to the one that came on my echo trimmer. Hope this helps.

ASIN	B0797M93G9
Best Sellers Rank	#7,022 in Patio, Lawn & Garden ( See Top 100 in Patio, Lawn & Garden ) #12 in String Trimmer Replacement Parts
Brand Name	HUZTL
Customer Reviews	4.6 4.6 out of 5 stars (3,605)
Item Dimensions D x W x H	3"D x 3"W x 3"H
Manufacturer	HUZTL
Manufacturer Part Number	HUZTL-AMHG080
UPC	766970762927

Carburetor For ECHO SRM 210 SRM-230 SRM211 GT200 HC150 HC151 PE200 PE201 PPF210 PPF211 Trimmer Brushcutter With Fuel Maintenance Kit Spark Plug HUZTL

Details

Details

Description

Specifications

Common Questions