Replacement for Hayward Vari-Flo Valve SPX0710X32 Side Mount Multiport Valve Rebuild Kit for S200 and S240 Series Pool and Spa Sand Filter 1.5 Inch Ports, 5 Inch Centerline, 6 Position (Black)

Description

Product description Great Compatibility — Perfectly fits for Hayward S200 and S240 series sand filters pool and spa. Available in 1-1/2 inch plumbing connection size side mount. 5 inch Centerline. 1.5 inch FIP Pipe Size. This also will retrofit any filter that has an SP071113 valve that needs replacement and upgrading Each part is manufactured to meet or exceed OEM specifications and tested to be a direct replacement for part number SPX710X32, SPX710X-32, SP710X32, SP0710X32, HWDSPX0710X32, 27512-154-000, CMP27512-154-000, CMP27512154000, SM1-HP3, 26-253-1105, 4800-25, 42105, 610377034975, HAY-06-238, HAY06238 Max Flow 60 GPM Max Pressure 50 PSI 1-1/2 Inch Plumbing 6 Multi-Port Functions Easy to install and maintain Provides maximum performance and superior flow at lower pressure drops Automatic self-cleaning prevents clogging or sticking Premium grade injection molded heavy duty reinforced ABS body, leakproof, strength and durability, anti-impact and anti-deformation, anti-corrosion and aging resistance for all-weather performance and long-lasting reliability Premium grade injection molded high quality noryl valve key assembly, with molded gasket for a continuously reliable seal Ergonomically designed handle allows for simple dialing of the various valve positions Built-in sight glass for convenient backwash viewing to ensure the water is clear and the backwash is done To install valve to filter , secure bulkhead nuts on valve to fittings on filter. TIGHTEN THE NUTS BY HAND ONLY. Connect pump, return, and waste lines by following the markings of the ports. VALVE TOP IS UNDER SPRING LOAD. To open top half and service valve, evenly and alternately loosen cover screws. To re-assemble the top half , place diverter on a smooth and firm surface. Make sure the pointer on handle and the arrow on diverter point to same direction. Press down the cover by depressing heavy-duty spring and secure handle with dowel pin. To re-assemble the top half to valve bottom , ensure bottom gasket and diverter sealing surface are clean and free from nicks to insure positive sealing. Tighten cover screws evenly and alternately. DO NOT OVERTIGHTEN THE SCREWS. IMPORTANT: Do not overtighten pipe fittings. Proper fitting make-up is hand tight plus one to 1-1/2 turns maximum. Always use for Teflon pipe tape or for Permatex No. 2 for connections. Add extra sealant if male pipe fitting is undersized. WINTERIZATION: Drain and winterize filter and pump per manufacturer's instructions. To drain water from multiport valve - depress and rotate valve handle and place handle pointer between any detente positions. Review: Worked well easy fit - No issues. Half the price of a Hayward brand. It does not have a pressure gauge but is tapped for one if you want to add it. Review: Good quality - It was a perfect fit, easy to put on.