WochiTV Adhesive Solid Rubber Strips, 1/2" Wide x 1/16" Thick x 180" Long Self Stick Black Neoprene Rubber Rolls Perfect for DIY Insulation Cushion Gasket, Sealing, Liner, Weather Striping

I used this material to refurbish an old pair of snowboard bindings. This material work perfectly to replace the worn out tread where the sole of the boot makes contact with the base of the binding. The thickness is true to size and the material itself seems to be of high quality. Durometer and finish are as described. Working with the material was straightforward using a razor blade, finishing the job with a belt sander to smooth the corners and give it a finished look. The adhesive is tenacious and held the material in place very well. The material comes rolled up (as depicted), and given its nature maintains this curved shape when unrolled. Be prepared to flatten it out if long continuous lengths of this material are required to be used. For my purposes this was not an issue and the adhesive held the material flat once installed. Time will tell how it holds up to temperature, water/ice, and the wear of use. I am quite happy with the results and would not hesitate to purchase this material again should I need more for future projects.

These came in clutch for fixing the removable fenders on my American Hauler aluminum car hauler. The fenders would bounce on their mounts since there was a gap and it was aluminum to aluminum. Over time, this cracked my fender mounts. I repaired them, but still had the bounce. I cut the 120" section into 4 pieces and installed to fill the gap where my aluminum fenders and frame meet. This allowed me to close the gap and provide isolation between the 2 points. Problem fixed! Great value for me. Nice, sticky adhesive. I need to send info to the trailer OEM, very simple solution to add this rubber and prevent damage on the expensive trailer.

I did not expect to find as many uses as I have for this roll of rubber strips. Sealing doors, windows, around light fixtures, and all these other areas. Its created a huge difference with managing drafts in our house and keeping moisture out of places it shouldn't be. Durability is solid. Ability to cut and easily work with this is great. Adhesion so far has been really good. One tip: buy multiple thicknesses to have the right product on hand. Love this stuff!

This is sticky on one side. I used it to seal around a dryer duct secondary filter box that didn't have a great seal. It's a little stiff and lifted off in one place where it went around a tight bend, but adding another piece of tape seemed to fix that. It's a firm rubber and seems to stick fairly well. Easily cut with scissors or utility knife. I knocked off 1 star because ideally the adhesive would be a little stronger. But that's unique to my use.

Works great

Very good adhesive and easy to cut Seals very good for garage door bottom

Good quality with sticky side to adhere

The length of roll and rubber/neoprene are fine, however the adhesive failed and I'll need to find a different product.

Worked as planned for rv roof unistrut spacers to allow water under

worked great, exactly as decribed!

Easy to apply, backing comes off quite well with little hassle. Good adhesion so far. This type of tape does require 24 to 48 hrs I found to fully cure and stick to what it's applied to I've found. True to the time all 3M tape adhesives do. This does not have 3M branding though.

Great product. As described

There are a lot of different uses for this; such as pads for the bottom of chair legs to prevent damage to your floors, weather stripping, gaskets, etc. I ordered it because I want to use it as a tire material for a 3d printed project I am working on. It's easy to cut and there is plenty of it for what I need, so I am happy with it.