Lian Li Edge Series-1300W Full Modular Power Supply-80 Plus Platinum-ATX 3.0, 3.1-PCIE 5.1-L-Shape Design for Dual Chamber Case-120mm FDB Fan-Supports up to 4X USB Devices-Black (EG1300BE.US)

I upgraded from an EVGA Supernova 1000 P5 because I wanted a PSU with a native 12VHPWR connector (ATX 3.0/3.1). This new PSU is effortlessly powering an RTX 5090 and a Ryzen 7 9800X3D. The 12VHPWR cable feels very high quality, and I feel much more comfortable using it instead of the goofy 3x8-pin adapter MSI tossed in with my GPU. The "edge" orientation of the power connectors on the PSU itself it great for my O11 Vision case, I have been able to quickly add and remove cables the couple of times that I've needed to do so. I've had zero issues with power using this PSU. Of note - use the cables that came with the PSU. I tried to be lazy when I installed this PSU by leaving the CPU power cables from my old EVGA PSU in place, but it just wouldn't work, even though the cables were identical. I swapped those out for the Lian Li cables and it fired right up. No shortcuts allowed, apparently. My only complaint is that the powered USB hub build into the PSU is only USB 2.0, and only has internal connections. It's very limiting to only have the old school USB 2.0 headers, but I did use it to add my Tryx Panorama AIO, figuring that a powered header from the PSU would be more stable than connecting directly to the motherboard for any odd power spikes that the AIO might have when cycling through my GIFs. I really would have preferred if this had a USB 3.0 header connection or a Type-C header connection to the motherboard instead, with breakouts on the PSU itself for 2.0, 3.0, and Type-C 3.x/USB4 with PD support, maybe with 2 or 4 internal headers and 1 or 2 external Type-C ports at the rear. Maybe in the near future, such a PSU will be made? If you have gobs of USB 2.0 devices in your PC, this is a great PSU for cable management and ensuring that you don't have power issues with those devices from overdrawing power from the motherboard.

Beautiful, high quality, sleeved cables. This is the best quality PSU I've ever owned, and it has no problems powering an RTX 5090. The quality of the 12v-2x6 cable is exceptional from both a manufacturing standpoint (pin-tip parity), to the rubber holding the cables securely in place. The sleeved cables are not rigid, and have give to them. They feel premium, just like the rest of the PSU. The PSU fan runs off 80% of the time. The 20% of the time the fan is on, I don't even notice it due to how low RPM it spins. :chefkiss: Note: This PSU will fit in a Geometric Future Model 5, but requires the front PCB to be removed first. Note 2: The connector on the PSU is a 12v-2x6 which makes this an ATX 3.1 certified case, despite it not being marketed as such (Amazon Image shows 12VHPWR on the PSU side). - If you're powering a 5090, I would recommend only using an ATX 3.0 / 3.1 PSU at minimum.

I love the angled ports. for a dual chamber PC it makes cable managing after building a breeze. at 1300w it is about as much as anyone needs. These PSU are getting so small for the power its insane. The cables could be a little better quality, they are a bit stiff. Other than that I am extremely satisfied

I love this PSU!! The design and layout of the connectors is perfect if you are using a dual chamber case!! The wires all seem of very high quality and are wrapped very well. The PSU is fully modular so all wires can be removed and then any you don't need can be left out. The built in USB header hub is also great!! It helped me with my build so much. In a modern PC build, if you use a lot of RGB and Liquid Cooling you will have many devices that will need a USB header so having a bunch built into the PSU is genius in my opinon. Great Job Lian Li!! Also love that it is 1300w. Should be ready for a 5090 when they come out.

Fits perfect in my case. Was easy to install the PSU and the cables. The included array of cables are very high quality individually braided cables that make a nice snug connection at both ends and look really nice. My 1300W model is doing a great job of supplying power to my system which includes a 9950x3d and ROG Astral 5090. I would highly recommend this model psu to anyone building in a dual chambered case.

Lian Li is starting to become one of my favorite PC component brands. This PSU is one of the A-tier power suplpies on the market, another home run from them. I've paired it with the Lancool 217, and the combo is just perfect. I really like the new L-shaped design that lets you connect PSU cables vertically, it’s an interesting innovation. Plus, they also include modular sleeved cables with combs, so there’s no need to buy aftermarket cable kits like CableMods!

Good power supply and great design. Fits well in my lian li case. Reason i did not give 5 stars is that lian mess up on the supplied cables. My motherboard Asus Rog Strix z790 uses dual 8 pin cpu power cable. Can you imagine a power supply of this wsttage with only 1 8x8 cpu power cable. Lian should do better than this. Now i have to use one 6x2 or 4x4 cable for the second connection. These cables sometimes does not fit properly. Wake up lian li. For the price and size of unit you need to start thinking out of the box. Instead of 1 8x8 and one 4x4 cable for a 1300 watt unit you needto be more realistic. Now i have to go use crazy glue to connet one split cable to fit. Guess i wll have to start looking into other power supply.

These power supplies are great. I have used some many other brands in my builds and when I found this one, I have not sued any other. I have built 8 computers with these and everyone has been flawless power is steady and cable management is so easy, my 7 year old can build with it and make the cables look like it came from the factory.

This was the perfect power supply for my Antec C8 Curve Wood Case. 1300 W platinum with 10 year warranty. Made Cable management very easy. The price was good as well. From the research I’ve done this power supply gets A rating. Built-in USB hub works great.

received power supply with 13 cables missing from the box and the power supply had a bent corner and was missing some black paint, this seems like a used product that was rma'd which was poorly done as a matter of fact, had to return this and buy another one from somewhere else.