PUTORSEN Monitor Stand Desk Mount for PC LCD LED OLED 17-32 (43-81 cm), Gas Spring, Ergonomic Height Adjustable, Max Load 8 kg

This is a very well designed, strong, robust and excellent quality monitor stand. I needed to mount a 28" UHD screen alongside a 24" HD screen, which have their VESA mounts at different heights so my existing dual monitor stand was no use. This stand is very easy to put together, has fixings for clamping (which I used) to or screwing through a desk, and holds the two screens alongside each other perfectly. At about £60 delivered it is also good value for money.

I was very impressed with how solid this arm mount is. It has a very good industrial feel. I didn't have the right mounting parts for my monitor which i knew before buying it , but i got some adaptors and it has been excellent since. The way the monitor arm 'floats' and you can pull it around is excellent. I didn't quite realise it did this at first and was looking for a way to lock it , but when i realised I was so impressed, you can pull in around to where you want. As a video editor this is a great feature as i can bring the screen really close to me for a good look. At the tools are included and I found it very easy to put up. Overall + Strong + Floating screen + Easy to put up I hope you found this review helpful. :)

Two primary points here. This stand is advertised as two things - Supporting monitors up to 32 inches wide, and supporting monitors up to 8kg in weight. This does neither of these things. From what I can see the maximum width that you can use this stand with is 27.5 inches on two monitors, a far cry from the 32 inches advertised. Furthermore - The "8kg" weight limit is simply untrue, as a C32G1 monitor, weighing in at 6.98kg (Just shy of 7kg) cannot be supported by this stand, unless at maximum/minimum pitch. However, these points aside, this is a great stand that does exactly what you need of it. While I do have complaints, ofcourse, this holds my Y27G flawlessly, and only suffers problems with heavier, larger monitors. Great for most, just not for all.

Super product, really sturdy and good quality. When you open the box there seem to be so many bits but this is so it fits pretty any desk. Don’t rush in like me, work through the instructions and you will use all the right bits. I fitted 2 * 24” to this and the right screws were in the pack. The arms plus screen simple pop onto the pole and you screw them to the desired height. They seem to bend and twist every way possible so it’s easy to get them in the perfect position. I didn’t get them in the right place first of - undo screw, move and re tighten and they are moved in no time at all. I have got both my screens off my desk and they are at perfect eye line. At £50 it was not cheap but absolutely worth it for the quality and fantastic flexibility. I am super pleased with this product.

I was looking for a dual gas lift for my new desk and it was ~£10 cheaper than some other very similar looking products so decided to give it a go. Really pleased with the results. The stand was well packaged and easy to put together, hex keys are provided but you'll need a screwdriver as well. The Adjustments are fairly basic (hex key/ screwdriver to tighten, no fancy quick release or thumb screws) but they work and the range of motion is very good. I have mounted a Dell 2407 (~6.5KG) and a Dell U2414H, the only adjustment needed was to the resistance to cope with the different weights (was fine out of the box for the lighter dell but required more for the heavier). With these monitors and a bit of fiddling, I have the distance to the wall (from the back of desk/ stand pole) at just under 14cm, which avoids the arms touching the wall. The only minor niggle is the cable management could be better/ slightly bigger - but with a bit of presiverance I managed to get everything routed (though Im not sure I'd want to pull it all out again in a hurry).

Good and sturdy, like all clamp type stands can be a bit awkward to attach if your desk/table has a lip thing. Easy enough to attach through the table though

Very happy with my purchase; arm is sturdy and feels strong; monitors are easy to move and rotate around; however if you want to have the monitors perfectly side by side you probably want to look for another stand; as these require a very large desk and for the monitors to be very far forward to achieve that.

It is currently holding a 8kg and a 4kg screen up, but it has a lot of flex in the tube whilst performing this, to the point the monitors are now resting on something because i don't trust the arm to not suddenly fail. It is useful for the positioning and angle of the screens, but i wouldn't trust it to hold the stated weight unless you are going to position the monitors right next to the pole. Assembling it was easy enough, but the hinge on the pole mount is so stiff, that the clamp rotates instead, causing the clamp to slide down the pole.

Ürün çok güzel ve kullanışlı. Beğendiğimi söyleyebilirim, yalnız takma konusu biraz sorunlu o yüzden video izlemek yada bilen birisiyle takmak daha sağlıklı olur. Arka aparatı ekrana takarken, ekran tutmaya dikkat etmeniz gerekiyor yoksa benim ekran gibi ikiye ayrılır. Ben takarken ekranı yanlış tuttuğum için, ekran ön panel ile arka kapağı ayrıldı fakat bir şey olmadı, tekrar takıp kullanmaya devam ettim. MSI olunca kaliteli oluyor ürün:) bu ürün için gerçekten çok kullanışlı olduğunu söyleyebilirim rahatlıkla sağa-sola aşağı - yukarı hareket ettirip çevirebiliyorum. Ve masa boşta kalıyor, buda klavye olsun mause olsun çevirmek, kullanmak için çok iyi bir alan yaratmış oluyor. Ben şahsen çok beğendim ve bu fiyata Türkiye de böylesini bulamadığımı söylemek isterim..

Questo supporto é piuttosto semplice da montare nonostante le istruzioni striminzite. Le chiavi a brugola necessarie al montaggio, inoltre, sono incluse nella confezione, quindi non c'é bisogno di altri strumenti. Una volta montato il supporto e installato sulla scrivania, i miei due monitor da 27", 4K, sono perfettamente stabili e facilmente spostabili/ruotabili. Ovviamente ci sono delle viti di serraggio che devono essere allentate o serrate se si vuole dare maggiore stabilitá all'insieme, specialmente con monitor pesanti che possono far abbassare i bracci. Tali viti fungono da "frizione" e da blocco. Naturalmente questo significa che il movimento dei bracci non sará libero al 100% nella maggior parte dei casi, ma onestamente non credo che sia necessario cambiare il setup con frequenza, una volta trovato il piú adatto ai propri scopi. Nel mio caso lavoro con i due monitor ruotati a 90 gradi, e affiancati sul lato lungo. Ho liberato un sacco di spazio sulla scrivania e finalmente posso avere i monitor all'altezza che voglio e nella posizione che preferisco. Consigliato.

Nous avions besoin d'un moyen pour enlever le pied d'origine de notre écran qui était moche et prenait de la place et nous avons choisit ce pied car il avait une grande envergure. En effet, contrairement aux pied classiques qui ne permettent un déplacement que d'une ou deux dizaines de cm, celui le permet jusqu'à 53 cm du socle relié au bureau. Le montage est particulièrement simple et rapide (selon mon chéri) et permet diverses configurations allant du serrage avec le socle au perçage direct dans le bureau. Pour notre part nous avons préféré la première solution et verrons par la suite s'il faut passer par le perçage car le plateau de notre bureau Ikea n'est pas des plus rigide ce qui fait que le socle du pied bouge de bas en haut quand on le déplace malgré un fort serrage. De plus, le jour où nous aurons besoin de l'écran en mode portrait, le changement est particulièrement aisé à condition que l'on laisse une petite dizaine de cm de fils de plus. au niveau de la liaison de l'écran et du pied. Donc pour l'instant, le produit fonctionne plutôt bien et nos chats vous remercient car ils n'ont plus besoin de sauter au dessus de l'écran et de risquer de le faire tomber afin de passer derrière.

Auch an meinem Home-Office-Arbeitsplatz soll mir ein zweiter Monitor das Arbeiten erleichtern. Nach wie vor ist "Platz" auf einem Computerschreibtisch das große Thema und für mich kam daher unbedingt nur eine separate Monitorhalterung in Frage. + Gewohnt schnelle Lieferung + Die Verarbeitungsqualität ist sehr gut. Alles ist sauber verarbeitet und lackiert / beschichtet, die Gewinde sind gut geschnitten und freigängig, es finden sich keine Grate, scharfe Kantren oder ähnliches! + Alle benötigten Werkzeuge (2* Inbusschlüssel) die man eventuell nicht im Haus hat, sind beigelegt und von guter Qualität. Zusätzlich wird nur noch ein Kreuzschlitzschraubenzieher (PH2) benötigt. + Die Anleitung ist sehr gut aufgebaut. Wer Comics lesen kann oder mit IKEA klarkommt hat auch hier keine Schwierigkeiten. Der komplette Aufbau, inkl. Monitorbefestigung, war in 20 Minuten erledigt. + Es liegt sowohl eine vormontierte Klemme für Schreibtischplatten von ~ 10 mm - ~ 85 mm Stärke als auch eine Befestigung für durchbohrte Platten bei. Ich habe die Klemmvorrichtung benutzt. (Für die Bohrung benötigt man natürlich eine Bohrmaschine und einen Bohrer (10 mm), eine vorhandene Bohrung darf bis zu 60 mm Durchmesser haben). + Die Monitoraufnahme ist sehr durchdacht gelöst: Zuerst wird die Vesa-Halterung am Monitor angebracht, danach das Ganze auf den Arm aufgeschoben und mit einer Rändelschraube gesichert. Bei meiner anderen Halterung mussten die Monitore noch direkt an den Haltearm angeschraubt werden, was bei großen und schweren Monitoren heikel werden kann. + Die Höhenverstellung lässt sich über 2 Arten einrichten: Zuerst über die Aufnahme der der Arme auf dem Halterohr, danach einzeln für jeden Monitor über den jeweiligen Haltearm. + Die Gasdruckfedern sind für meine beiden Monitore (24", je ca. 4 kg) ausreichend stark und lassen sich mit Hilfe des Inbusschlüssels schnell und dauerhaft einstellen. + Insgesamt sind die Verstellmöglichkeiten über alle 3 Achsen in einem großen Bereich möglich. + Die Monitore können einzeln auch um 90° gedreht werden (Pivot-Darstellung). Wenn es also nötig wird (und der Monitor diese Funktion beherrscht!) kann man schnell "hochkant" arbeiten. + Die integrierten Kabelkanäle sowie die am Halterohr befestigte Schelle sorgen für einen aufgeräumten Arbeitsplatz ohne Kabelsalat. Ich bin vollkommen zufrieden, finde den Preis mehr als fair und empfehle diesen Monitorarm uneingeschränkt weiter.

It was not easy to assemble and after struggling for a while, I gave up on it and went ahead with a similar mount from NB instead