MSI MAG MT201 - Premium Heavy Duty Single Monitor Stand Arm, Supports 17-49" Screens and 44 lbs, VESA Compatible, Adjustable Spring Assisted Mount, Clamp & Grommet, Quick Release Plate - Black

My previous monitor arm was working fine with my 34 inch ultrawide, but I recently upgraded to a 40 inch 5k2k ultrawide that, while glorious, is significantly heavier and outside my old arm’s weight range. I decided to pick this MSI arm up to solve that, and it has worked flawlessly. The monitor feels properly supported now instead of like I am asking a smaller arm to live a very stressful life. Installation is a breeze. I love that the instructions use pictures for each step, and each part required for that step is labeled clearly. The hardware is also separated into pouches with matching label numbers, so it is basically impossible to grab the wrong screw along the way unless you are really determined to cause problems. For something that is going to hold an expensive monitor over a desk, that kind of simple, organized setup is very appreciated. Once installed, the arm feels extremely solid. My 40 inch ultrawide is not a tiny display, and this does not feel like it is barely hanging on. The clamp holds firmly, the arm stays where I position it, and the monitor does not sag or slowly droop over time. That was my biggest concern going in, because a heavy monitor can make a weaker arm feel fine at first and then slowly reveal that it was not actually up to the job. The adjustability is also very good for a heavy duty arm. I can move the screen into a comfortable position, pull it closer when I need to focus, push it back when I want more desk space, and fine tune the height and angle without fighting the whole setup. The quick release VESA plate is another nice touch because mounting a large monitor is already awkward enough without having to hold it in place while threading screws behind the screen. The build quality matches what I wanted for a heavier ultrawide. The metal construction feels sturdy, the joints feel controlled, and the whole thing has enough weight and tension to inspire confidence. It is definitely overkill for a small lightweight monitor, but that is exactly why it works so well for larger screens. I would much rather have an arm that feels a little overbuilt than one that makes me nervous every time I adjust the display. It is also versatile enough that it should work for a lot of different desk setups. You get both clamp and grommet mounting options, support for common VESA patterns, and enough weight capacity for monitors that many basic arms simply cannot handle. That makes it a good choice if you are upgrading to a larger ultrawide now or just want something with room for future monitor changes. Overall, this is an excellent heavy duty monitor arm for larger displays, ultrawides, and heavier setups where a cheaper arm may not be enough. It installs easily, feels stable, supports serious weight, and gives you the adjustability you want without sacrificing confidence. For around $70, I think the value is very strong, especially compared with the cost of the monitor it is holding.

Upgraded to a MSI 34” ultra wide monitor and it was a little too heavy for my old desk arm mount. After researching other options, I ultimately decided to go with this MSI arm mount to stay consistent with my monitor’s appearance and because I trust MSI’s quality and performance based on my personal experience with their products. It was a little more than a comparable arm mount from another brand, but I felt more comfortable spending the few extra dollars for the MSI brand as I wanted something that gave me peace of mind that it would properly fit my monitor and keep it safe and stable. Setup was easy and the arm feels sturdy and secure. I love the range of motion it offers and is easy to adjust as needed. I will definitely recommend this to others as a great solution to save desk space and make your work or gaming setup more versatile.

Bought this monitor arm on sale for 69.99 using it to support my 38 in ultrawide AW3821DW. Very solidly built, twin screw design on desk mount for very good leverage. Has no issues with supporting the monitor after adjustments. Is very stable. Will not move unless i intentionally pound on my keyboard and even then the arm itself is not moving but my desk is. Pretty decent cable management, simple to use not the best but better than most budget choices. Plenty of height adjustment to use both standing and sitting. My only gripe is there are punch outs on the base for usb and usb c that are not included in this model and looks a bit out of place on an otherwise sleek base. That being said its hardly noticeable on a deeper desk and you're not looking directly at it. Even at the regular 99.99 price i think this monitor arm is a great value but on sale its simply unbeatable.

This is a spring loaded monitor arm. For the price I was satisfied. Used it to mount a 271QRX to my desk. Assembly was easy and intuitive. My only gripes were the swivel mount that attaches to the monitor is stiff and wants to flip up. Even after tightening the adjustment screw it will want to tilt up unless you really crank it down. Moving the monitor arms are silky smooth themselves. The built in cable management is nice but you want to use a high quality flexible cable like Zeskit’s X-Flex for the display signal. I used a thick braided hdmi cable and it didn’t work so well for cable management. The covers kept popping off.

I had to return the first one as something with the gas piston or whatever wasn't working as expected. I'm knocking a star off for that. I tried to go through MSI support, and they were just rough to deal with. Not quick responses, and they wanted me to send the item back, on my dime, before getting a new one, which would have left me without a monitor stand. Ended up just going through Amazon for a much smoother process. Unfortunately the time between buying the first one and the second one (a week or so), price jumped up. Still worth it even at the higher price. It is a very good quality, good future proofing as it can hold big heavy monitors (which I intend to get). Very sturdy construction and it looks good. No complaints at all, and even at the higher price, its cheaper than competitive arms designed for big monitors.

It was easy to set up and securely holds my 49 inch monitor but it's absolutely terrible in terms of adjustability. I struggle to tilt the monitor and to lift it without it just sliding back to its original position. The video I included shows it falling immediately and then it continues so slowly drop a little more. I was trying to put my iPad under it, but it’s impossible

For starters, this monitor arm is substantial in both the mount as well as the mechanics. The arm resistance for the monitor is easily adjusted but I recommend mounting the display itself before attempting. Mount system came with two massive bolts that clamp a bracket to the underside of a standard desk. Since mine is made of framing lumber with only a half inch overhang from the frame I had to drill the bolts directly into the bottom of my frame. (video above) I have total confidence in saying that the desk would snap in half before this monitor arm fails. This arm is rated for up to 40lbs which gave me the piece of mind mounting a rather heavy MSI oled on it. Pros -Very sturdy and multiple mounting options -VESA quick mount is very convenient and comes with a plate you screw to the monitor prior to mounting so you can just “snap” the monitor on to the arm without awkward screwing angles. -cable management sleeves that direct cables out of the bottom of the arm itself. -solid build quality and arm adjusts to a tightness that prevents the monitor from wiggling when you bump your desk -sleek design with minimal branding Cons -this thing is heavy. I would be worried about using cheaper tabletop materials when mounting but that’s with most monitor arms at this weight capacity. -adjustment knobs are trial and error. You can get it just right but you have to play with the spring tension a good bit I was really struggling to come up with any negative point on this product. I think this mount is the sweet spot in terms of price to quality with monitor arms.

Excellent product!

Brazo de construcción firme y resistente, hecho de metal. Tiene muchas opciones para ajustar la rigidez de las partes móviles. Lo uso para un monitor de 32" ( alrededor de 8-10 kg) y ha aguantado bastante bien.

Wunderbarer Monitorarm, für den ich eigentlich gerne 5 Sterne vergeben würde. Leider werden es nur 4, da die Neigung des Monitors in horizontaler Ebene (also ob der Monitor noch unten oder nach oben geneigt ist) unglaublich hart ist. Zudem könnten die Kabelschächte und Kabelführungen ruhig ein weniger größer sein… Ich nutze den Monitorarm mit einem 6Kg Monitor und für das Gewicht ist es viel zu hart. Macht aber eigentlich nichts, da man die Neigung am Anfang einmal einstellt und dann nie wieder verstellt. Trotzdem wert festzuhalten, meiner Meinung nach. Grundsolider Monitorarm mit sehr guter Verarbeitung! Empfehlung geht raus

Ik heb dit product besteld, maar het kwam helaas zwaar beschadigd aan. Het bovenste gewricht/kantelmechanisme is volledig afgebroken en onbruikbaar. Daarnaast zit de onderste basis al vol met krassen. Het lijkt erop dat de kwaliteitscontrole of de verpakking erg tekortschiet. Ik heb direct een volledige terugbetaling aangevraagd. Absoluut geen aanrader in deze staat!

Had ordered a standing mount for my curved monitor but it kept tilting. Returned that one and bought this one. This works very well and is sturdy for my 31.5" curved monitor. Theres no tilts or sags. Instructions were very easy to install. Has the standard VESA mount. In addition, you have two options of install the arm. You can either clamp it to the desk or drill a hole to your desk

Very sturdy monitor arm with some nice features- i.e. slant the monitor 45° and lift to dismount. The feel of and ease of use are fantastic. Monitor stays in desire position and feels strongly supported. Would give 4.5 stars if I could due to the mount screw on one side being very tight compared to the other, and the cable fitting plastic cover feels cheap compared to the rest of the unit.