Anycubic Kobra 3 V2 3D Printer Only, Support Multi-Color 3D Printing Need with Additional Anycubic ACE Pro, Max 600mm/s High Speed, Built-in Camera Higher Precision Higher Success Rates 255×255×260mm

this is a dam good printer it took a little trouble setting up. the directions could have been a little better took some time to set up. could use five holes for all the filament. the print speed is faster then anyone I have used. its got great self leveling. the design is amazing. I would easily buy six of these. the four filament holder is great I can print so much things in many colors. I love this product. it makes no sound when it is printing you don't even know its running I can run prints while I sleep and it dosent wake me up at all. the screen could be bigger its not big enough for someone who has problems seeing but is better then any other printer I have used. its very simple I just love it!!!

I have been 3d printing as a hobby for about 8 years (as of 2025). I have both FDM and resin printers and have seen the evolution through the years. This printer is by far the easiest to set up and prints excellently right out of the box. I used Anycubic PLA and PETG and it just works. The slicer has great feature and it is fast. I highly recommend this printer, especially if you are new to printing and want to jump right in. Add the ACE on when you are comfortable to get multi-color and material options. Great printer to get up and running with Multiboard BTW.

I did not have any sort of high expectations for this printer at all. I knew it was cheap and did not expect anything crazy. Just wanted an entry level printer as I havent had one since back in the days of manual leveling and needed a hobby to pass some time. This thing has been absolute garbage since day 1. I had printers almost 8 yrs ago that printed more consistently than this can. The bed leveling is for show. It does nothing for you, and anycubic has their software so locked down that you can't even see a mesh profile to see if it's even making one. Hope you like horrible software too as you are stuck using anycubic next or the anycubic phone app. Oh, careful with the phone app. If you send a print remotely, even with bed leveling beforehand, you may just come home to a print bed that has been scraped clean and destroyed by the "auto-leveled" nozzle. Also, don't expect a response from anycubic support about the issue either. So if you do make the mistake of purchasing this right now make sure you get some spare nozzles and build plates, you'll probably need them. Oh also it doesn't say it on this listing but a good amount of these printers come with a defective hotend that anycubic WILL replace, once it overflows and fills your whole extruder with globs of filament 👍🏼but not before that. Just to be clear. The gantry is crooked more times than not. You can relevel it, but don't you fret, it will be crooked again in no time. Why? Who knows. Oh and be sure that you keep your eye on the bed as you tram it as light pressure will also tweak the bed just enough to misalign your gantry if you're not careful enough. Does it print fast? Sure. Do some people have decent luck with it? Absolutely. But all in all it's an extremely low grade printer with a whole host of problems that can easily be mitigated by just spending a tiny bit more on literally any other printer than this one. I went in with very low expectations and was still massively let down. I spent more hours doing test prints to try and fix this damn thing than I did actually printing anything. Now I'm outside of the return window and am not cruel enough to pawn this POS off on anyone else. Maybe I'll deconstruct it and make a statue of the parts, or throw it into a ravine.

I have had a few problems but Amazon took care of them. Now I have a few months under my belt it works well. When I first got it it didn’t print well at all. I had to zero it out but after I got it worked out it’s worked well. For the price it a good little machine.

I have had this printer for almost a month and it is working like a champ. I noticed a lot of broken corners from the PTFE Tubes. I located my Ace Pros Above the printer and i use a small bungie cord to hold the tubes and cable off the crossbar. No friction and no wear and tear. My thing is the energy of the waste extractor is a little much I have a bucket underneath and a cover it direct it downward and it still shoot everywhere. They should put one of the brains on it and design a proper poop shoot.

The printer itself is good, but mine came with a bent Z axis, a damaged plastic piece near where the camera should be and a broken anti wobble for one of the Z axis also came broken. Contacted anycubic support. Two weeks and no communication back Other notable issues: The cable scheme scratches the frame during operation (will damage the cover of the USB-C cable and tubing over time), the inbuilt dispenser creates to much drag and enters on an awkward angle I'm willing to change this review score based on support response, but at the moment i'm not happy with the banding created by this issue, nor the way the Z coupler hovers over the motor creating axial forces that will keep bending the Z axis. Edit: It was on spam, they replied 9 days ago. They are ofering just sending the z wobble part, but the worst problem for me is the bent z axle. still i'm bumping to 3 stars for their support Edit of the EDIT: They offered to replace both Z axles and the broken pieces. Superb communication and support actually, so bumping the review Score once again

Quality prints and speed are great. Setup was not bad once you read through the manual. I got this printer without ACE but will be making the purchase in next few months. If you can get the combo with ACE do it. Slicer program can take some time to understand if you are new. Just read and take your time google terms you do not know and you will be up and printing in no time. The auto level is a big game changer as I come from older Ender series where we use paper checks the nozzle distance. One major recommendation right off the bat - Buy/Use some vibration dampening pads for your table and the printer. This is a powerful slinger and will cause strong shaking / vibrations at times. ( I got them on Amazon about 10 to 12 bucks )

This really is a great product, works brilliantly and is so quick! Very sturdy and well made, so pleased with it!

Total beginner when it comes to 3d printing. Did my research and for the money it meets my needs as a 1st timer. Straightforward to put together, and use. Update the firmware and it'll connect to your wifi so you can remote print and keep an eye on progress from your phone or laptop. Self levelling bed and set up is straight forward. Love it!

It was good in the beginning but the nozzle got stuck. And impossible to clean it out or change it without disassembling the printing head. Im glad that I returned it and ordered Bambu A1 which is by far x100 superior product and services and software to Anycube. Worth every penny.

J’ai récemment utilisé l’Anycubic Kobra 2 Pro pour mes projets d’impression 3D, et je suis absolument impressionné par ses performances ! Voici les points positifs et négatifs que j’ai observés : Points Positifs : Vitesse Époustouflante : Avec une vitesse d’impression maximale de 500 mm/s, cette imprimante est 10 fois plus rapide que la plupart des autres modèles. Les résultats sont obtenus en un clin d’œil ! Nivellement Automatique LeviQ 2.0 : Le plateau d’impression est nivelé automatiquement en 25 points, ce qui garantit une surface parfaitement plane pour vos impressions. Qualité de Construction Solide : Les noyaux métalliques de l’axe X/Y assurent une stabilité et une précision exceptionnelles. Contrôle de la Résonance et du Débit de Filament : L’imprimante gère intelligemment les vibrations et offre un contrôle précis du débit de filament. Expédition très rapide. Points Négatifs : Complexité de la Calibration : Bien que la fonction de nivellement automatique LeviQ 2.0 soit un atout majeur, je trouves que la calibration du Z-offset un peu complexe, surtout s’ils vous êtes nouveaux dans le domaine de l’impression 3D. Il peut nécessiter quelques ajustements et essais pour obtenir la hauteur de couche parfaite. N’oubliez pas que malgré ce point négatif, l’Anycubic Kobra 2 Pro reste une excellente imprimante 3D globalement ! En résumé, l’Anycubic Kobra 2 Pro est une machine puissante, rapide et précise. Je la recommande vivement à tous les passionnés d’impression 3D qui recherchent des résultats professionnels !

funktioniert wirklich überraschend leicht. Wir hatten 0 vorkentnisse.. Der Drucker war leicht zusammen zu bauen. Nach dem wir die Höhe vom Druckkopf nivilieren liesen, hat er wunderbar funktioniert. Wir haben von einer Plattform .stl Datein runtergeladen (Echsen, Heifische, (beweglich) und Katze, Hund..etc.) haben die dann im Slicer (orcas licer) zu einer .gcode Datein umgewandelt und mit dem USB am Drucker gedruckt.. Bombe :) alle sind voll begeistert und vorallem unser 11 Jähriger Sohn..