Hagibis Magnetic M.2 2230 NVMe SSD Enclosure with Magsafe for iPhone 17 16 15 Pro Max ProRes, 10Gbps USB C to NVMe Adapter, 100W PD, USB C, External SSD Case for MacBook, iPad Pro(MC100 Pro)

Awesome enclosure. Great build quality! I also got the Hagibis finned heat dissipation cover and it’s a perfectly machined fit. Installed a 2TB Crucial P310 SSD (formatted as exFAT) to use with my Steam Deck and my iPhone 16 Pro Max and it works great (and was very easy to install). No complaints at all. That Crucial SSD does draw too much power to be used with the iPhone without also having power plugged into the enclosure, but I knew that going in. Hagibis has videos on YouTube showing what SSDs work without needing external power if you need to be able to use it that way. All the ports work well and being able to still have an available USB-C port while the enclosure is plugged into your device (and external power) is a big plus. The enclosure comes with two thermal pads and one seems to be a little thicker. For the Crucual P310 SSD, the thicker one will work best as the controller chip is a bit thinner than the NAND chip and the thinner pad atop the controller chip won’t make full contact with the cover plate (or finned cover). You could probably also cut a section from the thicker pad to go over the controller chip and then cut a section from the thinner pad to go over the NAND chip and it would likely work perfectly. I also wanted to use the enclosure/SSD with my work phone (iPhone 17 Pro Max) but the provided USB-C cables are, unfortunately, incompatible. However, I emailed Hagibis and Jimmy was quick to send me the cables that will work. They arrived within days, despite shipping from China and they’re physically identical to the ones that come with the enclosure. For this price, I wasn’t expecting a product or customer service comparable with Apple, but that’s what I feel like I got. Very happy with this purchase. Great value for the price!

I have a very specific need, for phone videography, and this product, the pro version, fits the bill. 1) I needed to extend the capacity of my phone, that no longer supports micro SD cards. This can support up to 2TB in a small form factor. 2) I need it to support charging or else I'd have to disconnect to charge the phone. This one has a 100w PD port. 3) I need to be able to connect a my headphone via a USB-C, and this device has an extra USB-C port for just that. In fact, I can probably use this port to connect a microphone to enhance my videos. 4) I need it to be able to physically mount to my phone, and this device has MAGNETS in the Magsafe form factor so I can simply attach it to my phone with a magsafe ring. 5) I need to be able to mount my phone to a tripod, and this device has a iron plate that can be mounted to a magnetic magsafe mini tripod. You know why this is important? I can use a video / tripod handle with magsafe to steadily hold my phone. With the thickness of this device, I can't use those phone clamps with an arca foot anymore. 6) It has a capacitor that can keep the harddrive running for another 10 seconds to finalize the harddrive shutdown, in case of a power outage. Yeah, that might be important to reduce data corruption. Love it! Searching for a product that fits all of the bills is extremely hard and I'm glad I found it.

This thing is awesome! Works perfectly on iPhone 16 Pro recording in ProRes 422 HQ. No issues or drops. Keep in mind; use the provided USB-C cable or equivalent. Some cables will not allow the correct transfer speeds. That’s where you will see issues recording in apps like BlackMagic Camera app and such. I see negative reviews saying folks couldn’t get it to connect to devices. It needs to be formatted using your disk utility in Windows or macOS. ExFAT is the format that allows Read and Write functions. Just a simple search on Google will tell you this. It’s not the Device that’s the issue, it’s the NVMe drive that needs the formatting. Its price point is right on! It’s super simple to use and get connected. It it’s not ugly or in the way.

MC100 Pro - This enclosure was so aesthetically pleasing to me the first time I laid eyes on it, I just had to have it. Especially with the separately purchased heat sink lid, the "upgraded" lid that comes on it is pretty cool looking in my opinion, but that heat sink just puts it over the edge! The heat sink is somewhat functional, although it isn't as effective as I had hoped it might... While I was doing one of my initial transfers after installing the SSD, it did throttle, I can only imagine it was due to high temps. But I will rarely be transferring such large volumes, so I don't imagine I will experience much throttling in the future. The "Super Capacitor" does seem to keep the drive on for a few seconds after its unplugged if it's not ejected correctly. I absolutely love that it come with 2 magnetic rings that you can stick on anything smooth enough, I use a pixel phone, and because it doesn't have an expandable micro-SD slot, this is an even better storage solution, considering I transferred 150gb in about 5 minutes... :0

This device works extremely well on my iPhone 16 Pro, I've been making good use of it for about a month now. But plug it into my IPhone 17 Pro, and... nothing. The SSD doesn't show up, no power gets passed through from the PD port, nothing. It's like I didn't plug anything into the iPhone at all. It still works fine on my iPhone 16 Pro, I have both devices right next to each other right now. It's only on the iPhone 17 Pro that it refuses to work. So... pretty disappointing.

Should be part of any iPhone cinematographer's kit. Firmly attaches to the back of any MagSafe iPhone. Comes with two different USB-C cables, one for the 15/16 Pro and one for the Max. I'm using it with an iPhone 15 Pro. The back of the case also is magnetic so you can stack additional devices, or in my case I'm using it with a DJI Osmo 6 and Aerbeis magnetic/MagSafe clamp adapter. Keeping the extra weight in the center of the phone allows the gimbal to keep balanced easily. Adding on an external power source and USB-C peripheral is easy and in line with the center of gravity. Always test and be careful when adding weight and using a gimbal. Throughput is fast enough to handle ProRes Raw easily. I haven't used it enough to comment on heating, just using it for short tests right now. If it does start to overheat I have a MagSafe fan that could be stacked on as well (and powered from the second USB port), albeit without using the gimbal.

Worked with my iPhone 15 Pro Max, but using the original cables it does not correct with my new iPhone 17 Pro Max. Original cables work with my Mac mini M4, but only way to connect with my iPhone 17 Pro Max was to use a USB C cable from another SSD for my Mac. It would then connect and display files on my iPhone 17 Pro Max.

This is an excellent product, however you need to be aware that it would not recognize the memory chip if is brand new with no format. the down side is that you wont be able to use this device to format the memory even if is connected to a PC or MAC, the only way to get the device to work and recognize the memory is to take your ssd out and get it formated using a specialized USB adaptor or plug the memory in to ur PC and formated tnat way. Ones you get all this straight the product works and performs flawlessly as advertised.

1万円以下で買ったLexarの「NVMe SSD M.2 2230 1TB」を入れて、MagSafe対応(内蔵)の手帳型カバーをつけたiPhone16proで使っていますが、BlackmagicCamでの4K120fpsProRes動画撮影でもコマ落ちすることなく使えています。長短2本同梱されているうちの短い方のケーブルで接続していますが、長さも問題ないです。(ケーブルは見た目よりも柔らかく、フレキシブルでした。) SSDからアルミ天板へ熱伝導シート貼付で放熱する設計なので、長時間酷使するとかなり熱くなるため、冷却用ファンは別途用意した方がいいかもしれませんが、数分の撮影なら気にしなくて良さそうです。 バッファローのアプリ「写真バックアップ」での本体に保存した写真/動画のバックアップも高速に出来るため、つけっぱなしで使う以外にも使いどころがありますし、旅行に向けていい買い物が出来ました。

Alla fine soluzione migliore e più economica rispetto alle alternative. Comodo ed estremamente pratico l’attacco magnetico, lo uso con un Crucial 1Tb. Cosa che immagino accada con altri SSD delle stesse dimensioni a parità di utilizzo, tende a riscaldarsi, ma al momento non ho ancora acquistato la ventola di raffreddamento abbinata, valuterò più avanti. All’atto pratico consente un buon uso al mio iPhone 16 Pro, con la Blackmagic Camera App, registrano in ProRes LT, leggermente meno con il ProRes alla massima risoluzione, ma mi sembra di capire che il limita sia dell’iPhone più che del disco esterno.

Using it to run windows on steam deck via external SSD. It's amazing but only downside is that it struggles to charge the device while in use, your steam deck won't run dead but charging will be slow.

Complicated ports. Heats up easily

NOT COMPATIBLE WITH IPHONE 17