Dreo All-in-1 BaristaMaker Milk Frother, Electric Foam Frother for Latte Art Microfoam and Coffee, 15oz/450ml Automatic Milk Warmer with 30 Drinks, Dishwasher Safe, Dairy/Plant-Based Milk

I am so happy with this machine!! Finally I can make my matcha lattes at home, and for an affordable price! if you can not pay hundreds to buy a home espresso machine/steamer (or if you don't have the space for one). I use almond milk which turns out great. Of course it may not be exactly just like what an espresso steamer can do, but honestly for what this is I think the result is really really good. I also use the stir feature for my hot powder drinks, which turns out amazing as well and mixes the powders up much better than doing it manually, and you can choose the stir temperature up to 170 degrees.Note that if you overfill past the "max fill foam" line then your latte may not turn out hot enough. Stay within the max fill lines (there's two of them depending whether you are doing a foam drink or a stir drink) and you're fine.Super easy to clean as well, takes like 20 seconds or less. The propeller attachment has little screens that clean better/faster with a little brush. It's not hard to clean at all, just a quick pass with the brush.One suggestion for improvement: including a little brush custom-made for the Dreo would help for cleaning the propeller. I am using a brush I bought separately, and it works, but since the propeller is a small part, it's more tricky to get the bristles in between the smaller spaces. I will look for a smaller brush but would be nice if the machine came with one. But it's not a big deal. Great value for a great machine!!

Update 3/26/25 - I measured the amount of whole milk on a scale when poured to the minimum line inside the pitcher: 179 grams give or take of whole milk. I have no idea of that is a lot or a little. Like I said in previous updates to this review, I go through whole milk a lot faster but I still use this device every single day, sometimes twice a day.Update 3/14/25 - There are two spinner thingies that go into the center of the pitcher: one for Froth Mode (on the left side of the touchscreen) and one for the Stir Mode (on the right of the touchscreen). I actually haven't used the Stir Mode spinner disk and Stir Mode to make any drinks yet. I have only used Froth Mode because I just use whole milke, latte setting. Anyway, the top big propeller part of the spinning thing for Froth Mode came out once while I was cleaning it. I was able to pop it back in vertically. But it's slightly wobbly now if you move it around slightly. I don't remember if the wobble was already there from the beginning. This hasn't affected the froth results though (same froth as before) and the propeller part hasn't fallen out on its own since.Also, tip: Pour the frothed milk into your drink right away for best results. I think if you let it sit, it separates more, so you can swirl it around in the pitcher before you pour it in.Also, I usually fill the pitcher to the minimum line and I do pour all the frothed milk into my one cup (previously, I said I split it into two cups because the minimum quantity line in the pitcher feels like a lot of milk) because I'm the only one making a cup of coffee/tea in the morning. Basically, I'm saying it seems like a lot of milk but it seems fine in the end taste-wise.Update 3/6/25 - I wanted to add to my review that another nitpick thing I've found is the amount of milk that is required for the minimum line. I used to just pour in a little whole milk to my coffee (cold, I know, *shudder*). Anyway, the minimum line, which doesn't even include the area where you need to pour for latte art, is in my opinion a lot of milk. I usually pour half of the frothed milk to another cup of coffee for someone else and pour half for myself. You may think that the amount of frothed and heated milk from the minimum or latte art area (just above the minimum line) is good for one cup of coffee. Bottom line, I run out of whole milk a lot faster now using the minimum line for the whole milk, latte setting.Update 2/28/25 - So I have owned this product for over a week now. I have used it EVERY SINGLE DAY. I still haven't figured out how to pour the foam (whole milk, latte setting) to make actual latte art. I don't know if it's actually possible to make very nice latte art from this machine, but I am not a professional barista by any means. Secondly, you do have to use a sponge to clean the bottom of the pitcher after whole milk at least because a milky residue remains even after swirling water inside the pitcher to "clean" it.Original review - This machine is amazing. It actually works. The foam is micro enough that it mimics what you buy at the fancy coffee shops or big box coffee shops. I’m obsessed. Also does foam almond milk, there is an almond milk setting. I love that you just pour the milk in and touchscreen what you want In 3 ish minutes you have foam to top off your coffee or tea. I love that it heats the milk up too and foams it. This is way better than a hand electric whisk because it’s set it and forget it. If this breaks, I’m getting another one. One of those kitchen gadgets I actually use everyday in addition to my electric kettle. Now I’m spoiled and expect foam with all my matchas and coffees ha!

As someone with an breville machine dedicated to just steaming for my flair 58, I was skeptical about the performance of a machine like this. But I couldn’t have been more blown away by the quality of this machine, the milk is perfectly heated and has amazing microfoam. It is not too thick, it is not too stiff and is silky enough to make very clean pours. And this works even if you don’t know how to steam or are doing something else and leave it to steam. One of the downsides is that it is a bit slow, but that is counteracted by the fact that you will not be the one steaming, you just set the jug down with milk and it works without you doing anything. Theres build quality seems decent with a metal base and it does feel a bit light but not cheap. If you have a manual machine without a steamer or just want a microfoamed milk for matcha lattes, this is an insane value as it’s only 100 and does better than most thermoblock machines over 300.

Delicious & foamy! I mix my RYZE powder into the steamed almond milk with a dash of vanilla and a half tsp of sugar and it’s wonderful. HOWEVER, yesterday, when I made my first one, I set the temp at 150. It was very warm, but by the time I rinsed out the foaming cup and sat down to enjoy it, it was just sort of like warm. I like it extra hot so it’s hotter til the last couple of sips. Today, I set it at 170, hot thick foam, almond milk, high speed. When I stuck a thermometer in it after it finished, it was only 113 degrees. I immediately started another cycle and that yielded 154 degrees. But that’s a 7-minute wait to have to hit it twice. And still not enjoyably hot. On the fence here. Are they all like this or did I get a lemon?

I really wanted to like the Dreo BaristaMaker Milk frother but the milk doesn't not get warm enough. In my opinion milk temp for a good latte should be at least at 145 degrees and this doesn't even reach 100 degrees. It does create a nice consistency for latte art but we would have to pop it into the microwave to warm up to an enjoyable temp. I had to return mine for this reason.

Love it!! I am new to espresso and prefer milk drinks .. purchased a cheaper espresso machine 2 weeks before but item would only handle one action before overheating. This froths milk for me as I prepare and pull my espresso! Consistency is always perfect. I’ve had it 2 weeks so time will tell but very happy with purchase so far.