Concrete Crack Filler, High Elasticity Cement Crack Filler, Self Leveling Concrete Slab Repair Sealant for Driveway, Walkway, Patio, Waterproof Caulking Glue for Joint, Outdoor - 17.6 Floz

We have recently purchased a home, and the floor in the basement had several cracks that extended from one wall to the other. I intended to fix those issues prior to applying the floor epoxy. This was exceptionally suitable for the task. It includes two tips, and I utilized the one that can be trimmed to fit. I appreciated the gloves and plastic putty knives, as I have not yet unpacked all my tools following my recent move. Beginning at one end of the crack, I carefully moved backward along the line and filled it as I proceeded. I employed the putty knife to gently press the filler into the more significant crack sections. Upon arriving at the opposite side, I returned and addressed any sections that were already drooping. The bag contained enough product to fill three wall-to-wall cracks, with some remaining afterward.

Works fantastic!!! Picture is after I repaired using this product and painted the fence. I wish I had thought of taking a before picture!!

This crack filler was super easy to use. The pouch makes it easier to control the flow vs a tube and is not as hard on the hands when you’re dealing with several cracks at once. It doesn’t have a bad/strong smell. It comes with gloves and 2 plastic trowels to make application easier and less messy. My only negative is that it drys glossy and not flat. I would like it to match the concrete better. Overall I’m very pleased. Definitely will buy again.

This stuff is no good unless you're trying to plug a deep and narrow gap because it acts as more of a tar product than a spreadable or workable cement product. It is too gooey, sticky, stringy and inconsistent to work a long crack and it barely makes it out of the spout without sticking together in long strands. I quickly abandoned this and went with the Red Devil cement mix in a tube and it did the trick on long cracks, much better consistency and resembled cement much more than this pouch of syrupy gunk. Not a good product, this.

This product is described as "self leveling" on Amazon in the description yet when I received it there was no such claim on the actual product...so this is NOT a self leveling product and is quite messy to deal with and produces an "ok" result...I used tape to make clean straight lines, but tape should be pulled off before product begin to set up...I had an 18ft long gap between my concrete slabs to fill, and it took almost 4 full pkgs to complete the project...Box comes with rubber caulk product, rubber gloves and 2 handy plastic spatulas...

This worked nicely filling in the cracks. I put it in hot water for 15 minutes before using so it wouldn't be so thick. If the cracks are fairly deep, this will seep down into the cracks and you will need to apply more after it sets up.

Easy to use. I had mostly small cracks, but it worked well in those that were a bit larger as well.

Not worth the money! Find other methods

I recently picked up the 100 g pack of this heavy-duty plastic glue (ASIN: B0DS7GPGLT) and let me tell you—it’s a real game-changer for any pilot-turned-3D-printing-hobbyist like myself. Bonding Power & Performance: This adhesive delivers serious grip. Whether you’re gluing PLA, ABS, PVC or hard plastics from models and components, this stuff doesn’t mess about. It cleaned up my print failures, repaired cracked parts, and even sealed some mounting brackets without a second thought. Speed & Drying: With my printing business I need things fast. This glue dries quickly and sets strong, meaning I’m not waiting ages before testing new designs or installing parts. That kind of reliability in a workflow is huge. Versatility & Practicality: What stood out is how flexible the application is. From rapid prototyping to fixing harvested parts, it “just works”. The packaging also made it easy to store and access—no fuss, no mess. Value for Money: For hobby-industrial use I’ve found it to be a smart investment. You get a good size (100g), and for the level of adhesion and reliability I’m seeing, it sits in that sweet-spot between cheap hobby glue and high-end industrial adhesives. The Verdict: If you’re looking for a glue that’s robust, fast-acting, and versatile enough for everything from hobby models to 3-d-print repairs, this one hits it. It’s become a go-to in my workshop and has saved time, stress and parts. Highly recommend. If it fails, I’ll let you know (spoiler: it won’t).

Had a clean rip in my seat in my truck and used this to fix it….not an issue since. Have since used it on goalie pads with it working just as well!

It's working well. I used this to repair my golf gloves, and the patches are still on.

Ok product for small tear in leather couch but rough texture from the glue. Bought a better product with a patch to attach under the leather couch seat. Fortunately our leather couch seat cover can be zipped off to apply

Good buy does what it says (sticks things) but protect your fingers wear silicone or other gloves, what i would like to say is i have bought and used several times and the glue (if kept the lid closed proper) keeps ok ready for use again and doesn't clog up.