WALI Adjustable Dual Monitor Arm for 13-32 inch Screens, 22 lbs per Arm | Dual Monitor Stand for Desk, Full Motion with Tilt, Swivel, Rotation, C-Clamp & Grommet Base, VESA 75/100mm (GSMP002N), Black

I bought this to get both of my monitors off the desk, and I'm really glad I did. The installation was much easier than I expected. The instructions were easy to follow, all the hardware was included, and I had everything set up in about 20 minutes. The difference it made to my desk is huge. Without the bulky monitor stands taking up space, my workspace feels so much cleaner and less cluttered. I didn't realize how much room I was wasting until I switched to this mount. The arms are solid, hold both monitors without sagging, and it's easy to reposition them when needed. Once I got everything adjusted the way I wanted, they stayed exactly where I put them. For the price, I honestly think this is a great value. It feels well made, looks nice, and does exactly what I wanted it to do. If you're on the fence about buying a dual monitor mount, I'd definitely recommend giving this one a try.

This WALI monitor mount is incredibly solid and handles the weight of my monitor easily without any sagging or shaking. The gas spring arm moves fluidly, making it super easy to adjust the height, angle, and tilt whenever I need to. Installation was straightforward with clear instructions, and it has freed up so much valuable desk space. Excellent build quality for a great price!

I have bought four of these by now, in three separate orders, for my work desk. (I have lots of monitors.) First, the good. These are very heavy duty and easily adjustable. I have Dell 38" and 34" ultra wide monitors attached to them, and there is no "give" or drooping whatsoever. So if you are looking for a monitor arm that can hold even very large monitors like that - here it is. I would definitely buy more. Now, the bad. The four of these I have bought have come with wildly different attachment setups, despite all being the same item here on Amazon. It's like over time, the company just keeps re-designing or changing this arm. Why is this bad? The first two I bought were very easy to attach to my desk. Clamp, handscrew, done. The third one had a different system that was fussier, but at least still one handscrew. The one I just got had a totally different, much more complicated clamp that involved assembling multiple parts into the desk clamp, then tightening it to the desk with two bolts and an Allen wrench. It seems like the manufacturer is making these more complicated and harder to attach as time passes - no idea why. The ones I bought first, last year, were ideal as is. In any case, once attached (one-time effort), these are great. So I would buy them again and just get over the installation with some muttered grumbling about their clamp design engineers. I have also bought smaller arms from this same company WALI, and those were not good. Very flimsy, never would maintain a height or angle or level. This heavy duty one at least is solid, stable, and maintains its position. The various angles have tension screws for fine adjustment. I just replaced one of WALI's smaller arms with one of these and *finally* that monitor is, and stays, where I want it.

Okay, my advice is to take more time than I did and consider what you're getting. I decided to go with the three armed mobile option. It is a wonderful stand, truly. I was under the impression that it could fit both of these compositions - three monitors at eye level and two monitors at eye level with one raised up. Because of this I thought that there could be plenty of space to fit a fourth monitor on a stand in the middle of two monitors at eye level, one monitor on top. This isn't the best use of the particular stand I purchased - the arms are two short. Let me share my goals. I bought a monitor that has a wifi antenna built in to the stand, so I wanted to keep that monitor on its stand. I also work from home and use my work monitor vertically instead on horizontally. I wanted arms that would allow for a monitor on my left for my gaming setup, my work monitor on the right in vertical mode, my main monitor in middle, and a spare on the top. I wanted to be able to lift the vertical monitor so that I could use the top monitor and the vertical monitor from a standing position for my job. If this silly thing is what you aim to do, spend the extra $20 and go with the four monitor mount, just choose not to mount the fourth monitor. I will be returning the three arm and exchanging it for the four arm. Now, when you have something that is so tall and pressurized, you do have to understand that there will be a bit of wiggling when you adjust the monitors. That's kind of just unavoidable. When I adjust monitors, there is some wiggle, but I don't fear that they will fall. Make sure you play with the hex key for adjustment! There's a real happy middle ground for stability and adjustability depending on your monitor's weight that you will have to find yourself. I promise it's there, make tiny adjustments and you'll find it. I was able to construct this easily on my own (not that my gender should matter but I'm a woman) but it would be easier with a partner. The cable management is awesome, just make sure you have enough slack or the piece will fly. I still have to find one in a pile of art supplies. I really appreciate the way that the vesa plates connect to the arms - there is a sliding component and they lock in with a screw. Also I do love the idea of using this in a shared office - you can tighten the screw enough on the pole that it's there and stable, but you can rotate it so that you can show someone across the room what you're working on. If you're looking for this particular configuration (one monitor on top, two on bottom) it is an amazing arm and I fully recommend. I'll attach a photo of what my setup looks like now before I purchase the four-monitor version and tear it down. For reference I have three 24" 'monitors' (one is an LG tv) and one 27". Hope this was helpful! I'll do my best to answer any questions

Just got this on a flash deal and delivered the same day. Bought this for the 45" LG OLED I just bought. Assembly and installation was straightforward and easy. Mounted the 45" as a one person job, easy peasy. I did have to tighten the arm to lock it in and prevent sagging. It appears to have quality parts, which makes it a great value monitor arm. Highly recommend!

Great item, for the price. Ended up purchasing this after going with “Amazon’s overall pick”. This is a much better product, arm stays in position and doesn’t randomly dip/drop due to monitors angle or weight. Easy to install and assemble, quality material, overall happy with this purchase.

I bought this based on other reviews. The only known mount option for the G9 Odyssey costs $400. I bought this mount as opened box for $70 making it quite the cost difference between the two choices. For other odyssey owners out there this mount will cover your needs, the reviews are accurate. However you will need to follow a couple quick steps. Before mounting the monitor, assemble the arms together on your desk. Be careful not to lose the little metal tabs between the arm shrouds they fall out easily when you take the arms apart later. Next take the provided tool and spend a minute rotating the middle of the arm adjustment screw towards the + symbol. You will question if the bolt will fall out from the amount of turns needed. Doing this is required or the gas piston won't hold up the monitor! Next the problem child of this mount is the vertical up/down tilt at the end of the arm. The included bolt won't hold the odyssey up and its a pain to deal with when the monitor is mounted. So trash it. Now take the heavy piston arm to your garage or hardware store. I found that a 13mm bolt head fit the hole and threads. Add a washer on both sides followed by a castle nut. You will need two 13mm wrenches or socket wrench to tighten the new bolt down, it won't take much pressure. Next reattach the arm onto the mount, without the monitor. Use a level or eyeball it to tighten it down evenly leaving the tilt at 0 degrees. Though it might be best to tilt it back or upwards 10 degrees due to how the arm mounts into the monitor bracket. Lastly mount the back plate to your monitor and attach the piston arm. If you're mildly strong pick up the monitor with the screen facing you then drop it into the mount on the desk. Really it's a two person job! If the monitor is tilted incorrectly you are going to need a friend to hold it or adjust it as you tighten/loosen the new bolt again, a major pain. I had it sitting on the desk and it was a thirty minute fight trying to get the tilt right. Turns out the mount itself on the arm tilts forward about 10 degrees making the monitor tilt down a little. Ughh just bring a friend the tilt adjustment is an all or nothing ordeal. Too Loose the monitor flips down and too tight it won't budge. It was terrible juggling this thing with tools in hand with this heavy thing... And that's all the extra work you need to do! Tighten the piston adjustment bolt towards the + and buy a new bolt for the vertical tilt. Oh pro tip: test without the monitor attached sitting down and see if you like the placement. Originally I had mine mounted center on the desk and well that didnt work at all. Now its off center to the right. Also use the included package foam to check clearences. I balanced the foam on the end of the arm and it worked great as a reference piece. As for mount itself, the mounting plate included does fit the odssey's metal cup plate, use the included black screws with a screw driver. Just be sure to tighten "everything" down. Don't skimp on this or locktight if you have it. Overall everything is thick aluminum or cast aluminum so its solid metal. The pressure plates are thick steel and well painted. Everything fit together without any extra work. The desk pressure plate is only held on top of rear vertical bolts by gravity. Its very jank but works the part when tightened. The plastic cable covers were a pain but doable. The biggest gripe I have is the janky L bracket. There are four thick screws holding it together and its not flush or a perfect 90 degrees in the back. So if your desk is against a wall like mine, it won't be the most ideal... I didnt add the plastic cover to save on an extra half inch clearence against the wall. I really dislike the screws on the L bracket. I had two of them strip out with mild pressure. In the future I'm going to redrill the holes and add proper bolts to secure it. The extra added effort was worth saving $300 over the other expensive option. I'll update this review if anything changes. For better or worse.

This is far from the ideal table mount for ultrawide monitors, but it is somewhat serviceable if you can live with some flaws. Please take some time to look at the screenshots I posted for an idea of how you would want your setup to look like. 1. With my monitor flushed back toward the wall as I possibly can, there is still a 8.75 inch distance from the wall to the monitor's screen (not back of the monitor's housing). 2. I have it so that I cannot see the "arm" attached to the pole because it would have been an eye sore to see both the pole and articulation arm. That's the reason why I have it at 5.75 inch from top of the desk to the bottom of the monitor. 3. The clamp method is solid, granted you have support metal framework or a sturdy wood framework that will allow the clamp to station itself properly. I have it just tight enough where I can't twist it any further without causing damage to my desk. It seems sturdy. The weight of my monitor is 18.7 pounds and it is an ultrawide monitor found here: https://www.amazon.com/dp/B06XFXX5JH/?coliid=I18UWY3B4ZBTSR&colid=3NQEL5RPRFI67&psc=0&ref_=lv_ov_lig_dp_it 4. The points of articulation are good, but they do not execute well. Tightening and loosening each articulation point requires a tool (provided), which feels archaic. The gas spring is a nice touch, but I had to find the perfect sweet spot where the arm and articulation point held firmly after using the tool and winding it up several times to get it right without it falling and slamming my monitor against my desk. This isn't necessarily the fault of the articulation points, but just the technology seems dated. 5. Range of motion has good options because of the multiple articulation points, but it feels stiff. Changing each articulation feels rusty. I understand that it shouldn't feel too "oiled up" because it won't have that sturdy feel. It does feel like a trade-off. 6. I went in expecting to get a fully articulated mount for different viewing purposes, but I think I ended up with a table mount that can only stay in one place or else the composition of my desktop setup looks imbalanced. As you will see in the images, the pole is mounted off-center so that I can have my ultrawide monitor centered properly. Because of the arm and how it articulates, there is no other way around it. You will understand this better if you do decide to purchase this mount. 7. For my first time installing a monitor table mount, it was overall an easy-to-moderate experience. There were steps in the installation that were frustrating, but I think that had to do more with how I wanted my setup to look like without compromise. 8. Because of the 8.75 inch distance from wall to monitor screen, the monitor feels to close for my viewing preference. The difference between this table mount and the original monitor mount is, 8.75 inch from wall and 6.75 inch from wall (original mount). The two inches makes a difference when it comes to desktop real estate. If you plan to having it flushed against the wall, especially completely, this isn't the mount for you. If you want smooth and seamless articulation and range of motion, you may need to look elsewhere. Perhaps the Amazon Basics mount or the Ergotron LX. They are both in the $100+ range so I understand those mounts may not be ideal. But I'm an idealist when it comes to my PC gaming and desk setup so I will most likely look at a few other options. 9. VESA mount was easy to install. Even my monitor supports VESA 100x100. Most monitors do, so please check out your monitor and remove its original stand to measure it for yourself. Do not always trust the manufacturer's customer service because LG told me that my monitor is NOT VESA mount compatible. It's 70x70 and 100x100 VESA mount compatible. Final Verdict: I may or may not keep this mount. Perhaps, I need something simpler. Maybe just a pole and VESA adapter mount. I don't think I care so much for the arm and articulation because I found it too much of a hassle to center my monitor. Not to mention, not being able to have my monitor more closer to the wall was probably the deal-breaker for me. A couple of more inches back and I would have been pretty satisfied. To understand more of what I tried to articulate, but done so poorly (haha), please check out the images below. The measurements I listed above are true. It may not look like it in the images, but I measured it. I was not paid to write this review. My opinion is my own. I only hope to help others find good products and hopefully make their lives a little better. I hope my review was helpful. Update: I ended up returning it because the gas spring was not working properly as it should. No matter how much I set it to keep the weight of my monitor up, it would droop and slam my monitor to the desk. It was working just fine for almost two days and then it malfunctioned. As an alternative, I purchased WALI's other mount without the arm. I am able to flush my monitor further back (almost 3 inches further back than than this mount), and I'm very satisfied with it. If you are interested in a excellent desk mount without the articulating arm, check this out: https://www.amazon.com/gp/product/B07MTS4H7P/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

The mount not fitting into the screen back it’s bigger What could I do ?? Samsung g9 49 inch curved

I am very bad at assembling anything and it took me 10mns top to install this. It supports my two big screens without any issue. so definitely 5 stars!

テレビに使用。そんなに微調整をしないなら、これで満足です。 可動範囲が限られているが、使用目的は叶いました。 パソコンのモニターのように、作業により、高さや角度を頻繁に変えたりするのではなく、向きを変える程度の使用ならコスト的に大満足です。

Couldn’t have a better setting! It moves easily, you can choose the height, the instructions are really clear

great easy to assemble good durability only one issue rotating the monitor is very stiff im affraid of adding to much force on my monitor where it could break