SABRENT 16-Port USB 3.0 Data Hub and Charger with Individual Power Switches, 90W High-Power Output (HB-PU16)

My current build could not exist without this device. For 16 3.0 ports, there is no beating this price when you consider the ease of organization and the reliable connection that these provide. My PC is mounted on the wall, and this hub is connected to my PC via a 30 FT USB-B to USB-C connector. The 90W power supply makes it easy to charge peripherals and also doesn't feed off the PC at all, so functionality is all there; the product is extremely stable...I've never had any issues using this. I used to have the 10 port Sabrent hub, and I had the same praises for that...but of course as time goes on, I found new gadgets to play with and needed more slots. I will say, the added weight does feel great to hold, and the material feels very nice to hold, as it's kind of a brushed metal and feels very premium.

I needed to make 400 clones of a flash drive. First I bought a $250 duplicator unit from DupliM (which was a disaster) and then I tried using this Sabrent device in conjunction with a free software applicaton (imageUSB from Passmark Software). Does EXACTLY the same job, but without the erratic behavior and random error messages, all for ONE THIRD of the price, and sixteen ports instead of just ten. This solution is just as slow as the DupliM device, but as long as you're not in a huge hurry, it's a lifesaver! Certainly way easier to set up 25 batches than to manually copy to 400 USB flash drives. I can't comment on the performance in more typical situations, since I'm only using it to make multiple flash drive clones, but it seems decent. Everything seems to work as it should. Seems well made, too.

Very solid, precise build quality. LED's with no load continue to glow for several seconds while internal capacitors discharge, so you think they are defective (switches) but they are not. Load them and the LED's respond instantly. Super nice for a dense workbench or office desk. Wall mounting excellent. Highly recommended!

This thing was the answer to all of my Audio problems. It does everything it’s supposed to do. Comes with a bracket to wall mount so I mounted it on the wall a couple inches above my Table. SLO from my Work Station can easily reach across and plug in or unplug and tap the On OFF Switches for each USB. Everything is absolutely perfect except for the actual fit of each USB Port. I wrecked two USB Cables trying to push so hard to get it into the USB Port it is so hard to tell if the Plug is going in the right way. Even going in the right way I have to push so hard several times the thing slipped out of the bracket and flew across the Table! It’s rugged so the thing survives but does destroy my Cables. I’m sure it will “ break in “ with use. It’s just unfortunate that I got one that has such tight tolerance for the USB Cables it’s very hard to plug in and unplug my Cables without destroying my Cables. Fortunately for me once I have mine all plugged in I should not have to unplug again ever again. Maybe to paint the place or something. But otherwise once in it should be permanent. I probably should have exchanged it but so much hassle for me to do that. I’m sure if I had gotten a ‘ good one ‘ I would be raving about how cool this thing is. Very necessary tool for doing Audio Recording and Mixing and Mastering in the Studio. No more daisy chains! This is the answer here!

Don't expect full hard drive speeds. I have two T7's connected and they average about 300MB per sec. read and write. Since I am using them for some basic storage of clip art the speed is fine for me. Use this if you have loads of input devices. I had three hubs going and this replaced them all with this one device. All gadgets are working great. Especially handy for those pesky USB dongles for keyboard and mouse. I love the power buttons. I keep hard drives off when not using them. This hub is also really helpful when you have a device that needs direct connection to your Mac. Plug everything else into the hub. I am using 11 of the 16 ports with no issues so far.

Until now, I was using 2 usb hubs. One was a 2.0, the other was a 3.0. both were 4 port hubs. I never understood why sometimes data transfer was way faster than other times. Sometimes my phone would barely charge. The answer of course is that 2.0 hubs, ports and cables are about 10 times slower than 3.0 cables, hubs and ports. A 2.0 device will not be harmed by plugging it into a 3.0 port or hub. The device determines how much current to draw. A 3.0 cable plugged into a 3.,0 port also can carry significantly more current than 2.0. PROBLEM: My wireless keyboard and mouse connection became intermittent. I tried plugging the dongle into several different USB ports without success. I googled the problem again, (two days later) and saw a post about plugging the dongle into a port on the other side of the computer (laptop). I switched the dongle into a port on the other side of my desktop tower. SUCCESS!! Apparently, the problem is not is not in the hub, it is a USB conflict. My guess is that there are at least two USB buses in most laptops and my desktop. Switching the dongle to a different bus solved the conflict problem. If I ever realized that I was using a both a 2.0 and a 3.0 hub, I had forgotten. Now, I have one hub with plenty of ports. It is a great connivence to be able to simply turn a hub port on or off when removing or plugging in a new device. Buying this hub was a really good decision. Time will tell how well it holds up. I really like the of being able to turn individual port on and off. I have a Western Digital 4 TB drive a 2 TB drive and two 32 to 500 GB sd cards connected, in addition to 3 usb cables used primarily to recharge devices. They all work flawlessly. Time will tell the story about how long this hub lasts and customer service. I did take the time to register the hub which extended the warranty by a couple of years.

Didn't last an hour before it started having issues. Used a smaller port extender and had no issues, but this one has been disconnecting all my additional devices connected to it

This hub is fantastic. Easily handled 5 external HDDs without a hitch. You pay a little more but, the build is solid and performance is excellent.

Usage privé mais exigeant, niveau professionnel

Excelente producto. Lo recomiendo completamente.

gran calidad y tamaño compacto para el numero de puertos que tiene. compraría otro si lo necesitase

bütün portları aktif kullansanız bile pcnin usb portunun desteklediği max hızı alırsınız ancak gerek malzeme kalitesi gerek teknik özellikleri güzel bir ürün, çok fazla usb bağlıyorsanız pcye kurtarıcı olabilir. Tercih edilebilir.

Good quality