67" Display Cabinet with Glass Doors and 2 Drawers | Black

I bought this 12/28/2025 and received it 12/31/2025 first off the box is heavy, very heavy, especially if your weak like me. I could not get this up stairs so I opened it down stairs and carried the pieces up stairs to assemble. Tools: you will need a drill and a screwdriver, maybe a mallet, though the back of a screw driver works too. I say drill because there are some pieces that you will need to drill into the wood. The LED lights seemed easy enough. There are convenient holes in the back of the cabinet that you can thread each LED strip through. Take the tape off and glue stick them to your liking. I chose top back. Then plug it in and you’re good to go. It took me a minute to figure out how to get the lights to quit blinking through different color cycles and just stay on one fixed cycle. I am still not even sure what I did to stop the blinking. I have also noted slow delay time in switching colors and even turning off and on, could be I’m to far away or not aiming the remote the right direction, but after a few times and some adjustment of where I’m pointing the remote it seems to come on. It’s kind of finicky though, at least from my experience. The glass doors seemed the most tricky to install but it was very do able as long as one knows what they are doing. There has been reviews saying this is a two person job and some saying it’s one person job. If you have hard wood floor or something similar it’s very do able for one person to do this. You just need to put the cabinet on its side as you attach the top and bottom pieces together. I have carpet so we used two people for that task as I lifted the top up and put it down on the bottom-I guess even that could be one person but it seemed easier with two. I have also seen reports that the cabinet is not sturdy. This is not the case for me. It is sturdy, sure there is a little shake when I close the doors but nothing to knock down anything I have inside (action figures and the like). The other thing I like to touch on is can a novice put this together. I think if someone is patient and knows how to use a drill and such, sure a novice can do it, but it may take a long time to do. As for me I am definitely a novice, if there was a rank below that, that would be me. When i opened up the box and saw the instructions I was overwhelmed. The instruction booklet also had a QR code that took you to their YouTube page and you can see how to assemble it that way. That freaked me out even more. I went and hired a handyman to put it together. Watching the handyman do it and following along on the instructions and giving him boards that was needed made me think I just over reacted and I probably could have done this myself. Still hiring a handyman took so much stress off of me. He started at 3:30pm and finished around 5:40pm, so roughly a 2 hour job. He could have been done sooner if he didn’t get so many phone calls haha. The cabinet looks great, stands about 6 feet and is just what I needed. The instructions, after I calmed down weee actually very easy to follow and everything was there in the box, I even had extra screws and such-so yeah no missing parts. I don’t know if it’s scratch resistant, it’s wood so I’m sure it can get a scratch if you’re not careful but for my needs I think I will be fine. If you are still curious about the build you can YouTube the build video of this cabinet, just search #FLA-0101 and it will bring up a 7 minute video by ATASKY. Final verdict: I love it! Looks great and just what I need. I will probably order one more as I already filled it up-and yeah I will probably do a handyman again to install it, it’s much more relaxing that way. I am not looking forward to bringing the box inside the house though-it was heavy. Haha

So I got this to replace my open shelf furniture that displayed all my collectables. Reason being...my darn cat! She kept insisting on going up on the shelves and once she started knocking my Gundams off, well, I realized I needed something that was cat proof. There's a few options online around this price range, but I liked the look of this one way more than the others. I'll admit I was sort of worried about glass being shipped...glass is glass, and glass breaks after all. Turns out, Lamtor knows their stuff with shipping. Nothing was broken and it was neatly packed. Box is super heavy by the way. Like 105lb. My UPS guy wouldn't bring it in for me, so I lifted it in solo. I don't recommend that if you don't work out. It is heavy because man, this thing is robust! And hey, for the price this thing goes for, I was glad it had some heft to it. So no concerns about quality there for sure. Instructions are long, but pretty detailed. Lots of steps. If the instructions recommend two people for a step, like putting the top half that is assembled on the bottom assembled half...please use two people. It is more awkward than heavy. Took maybe an hour or two to assemble. At first it was a little wobbly when I put it together, but realized I forgot to add the little wedge pieces on the back side and those immediately got it stable, even on my carpet flooring. Don't skip steps like I almost did, oops. It honestly looks way better than my original display furniture. I originally wanted one of these, but could not justify the price. Looking back, I wish I got this in the first place. Consider me a happy customer! I don't usually write reviews for anything, but man, between looking way better, all the color options for the lighting AND keeping my cat away from it all, I consider this a big win! Honestly might buy one of Lamtor's smaller ones in the future for another room.

Great quality. Fits perfectly. But I don’t recommend if you don’t have the patience to put this together. it took me like 4ish hours and my back killing me. But it looks awesome. The app for the led lights worked instantly, no set up. Dedicate building this on a weekend bc it will take a long time, lots of screws and pieces to put together and no screw drivers or tools provided.

Cabinet is pretty good quality. Assembly took some time, there are numerous steps to complete but if you take your time, it should come out ok. Everything assembled fine and cabinet seems sturdy. I guess my only complaint would be that the adhesive didn’t hold after 24 hours and the light strips began falling. I had some 3M led clips and used them to secure the strips and everything is on solid now. Definitely a great buy, a lot of value for the money. Updated: after just 5 months the LEDs are starting to fail. Removed 1 star because they should have lasted longer than that. Contacted seller and they are supposed to send replacement lights. Hopefully, they do.

Im 6ft tall and this display cabinet is huge and can hold a lot of figures. It took tike to put together especially when handling the glass doors but it was well worth it. Make sure to read the instructions and follow them carefully, dont get ahead of yourself! I like the multicolor factor and the dimming lights from high to low. I also like the cabinets on the bottom so I can store my folded boxes once I take them out to display. I definitely recommend this display cabinet and am looking to buy another one as I maxed out the space already, which is a good thing for me. Also for me personally, it doesnt weigh a lot and it was easy to push around and move into place.

The end result is mostly something I’m happy with. apart from the light strips and the adhesive used, which is terrible and comes off easily. Specifically near the black cord that leads to the light strip. Every single (4 parts) one unstuck from that exact part and I’m still trying to ensure they stay up somehow. So far super glue seems to work even though that’s goofy. And feels like it won’t work long term. You can really see the top light strip, shorter people will probably see the one under the second tallest). And it’s kind of a bummer. I wish it was more hidden. Or even better that the lights were just preinstalled into the material like some other shelves I’ve purchased before. That aside it was a pain to put together. Be very careful with moving around priced I nearly snapped the back piece off one side early on because it has you attach the two top sides together with this very small board and then asks you to flip it for some reason and I knew better than to listen to the dumb instructions, but tried and regretted it instantly. Instead pushing the top on while it was in its initial position. It’s structurally “fine”, but it definitely madden me curse at particle board bs. I get it’s cheap, but sheesh. At least build it and instructions in a way that won’t break it. Aside from that both shelves have you screw them in. Whether this is necessary I don’t know. But I did it just in case there’s some reason I couldn’t see. The holes were misaligned. It also doesn’t well explain where the extra hole (for a cable guide piece later) should go. I also had to untighten some cambolts on the back because my shelf didn’t slide into place as the two sides were too close together in back. So it wouldn’t fit. It was a huge pain and I didn’t see any mention of saving tightening for later. All in all I’m okay with it, and it looks nice but it was a pain. I can’t stress enough. The second picture illustrates (hopefully, I took the picture myself while holding everything so it was hard to get a good one) the holes not being in the right spot. Nearly all these tiny screws went in at an angle and made it really hard to keep the shelf flush and most didn’t go all in. And I nearly forgot, the spacing is so close to the sides it was difficult to screw in. Maybe a drill would’ve been better there. So if you get one use a drill I guess. That alone took probably 30+ minutes when it should’ve taken like 5. It’s just 8 screws.

I bought this glass display cabinet mainly to show off my action figure collection, and it ended up being exactly what I needed. The glass panels make everything feel really clean and open, so you can actually see the details on the figures instead of them getting lost on a crowded shelf. It almost makes the collection look like a little museum display. Assembly took a bit of patience, but nothing too difficult if you take your time. Once it was together, it felt sturdy and the doors line up well. I especially like that the shelves give enough height for larger figures, not just small collectibles. Another thing I appreciate is how well it keeps dust off the figures compared to open shelving. If you collect action figures, you know that alone is a huge plus. Overall, it’s a great display cabinet for collectors. It looks sleek, protects the figures, and really elevates how a collection looks in a room. If you’re into action figures or collectibles and want something that shows them off properly, this cabinet does the job.

I don’t know what’s going on but so many vendors on Amazon do not have inventory for display cabinets. Prior to this purchase I did extensive research online and compared what was out there with other retailers. This cabinet seem to meet all of my needs in terms of capacity and measurements, plus lighting option. I would have rated it a 4 star but we had several issues they include: instructions for the glass door installation was wrong, one shelf was slightly warped. So happens to be the board above the drawers. The drawers do not close easily. Perhaps with all the weight o er time it will straighten itself out? One of the plastic lighting clip was broke. Finally the lighting strip will not stick well, so I plan to super glue it. FYI: As one purchaser stated the box is EXTREMELY HEAVY! Fortunately for us Amazon/UPS deliver to our door. Secondly you better be in really good shape (physically) to put this together. It was an all day project for sure. If we had IKEA in Hawaii I’d buy it from them, easier installation and better quality. Overall, it’s okay and I got all of my hobby stuff in and things we bought when traveling. Considering inflation and limited vendors who ship/deliver to Hawaii the value is alright. Would I buy it again? Probably not.

Muy fácil de armar, consejo: tengan paciencia al momento de armarla y no se mortifiquen si notan que no es estable en el proceso de armado ya que casi al final al colocar unas especies de triángulos empieza a ganar estabilidad.

hace su trabajo fácil para ensamblar