Diablo Demo Demon Carbide Teeth Reciprocating Saw Blades, 9" Length, 3-Pack | 6/9 TPI, Ideal for General Purpose Cuts, Variable Tooth Design - DS0909CGP3

There was a deal on this set of 3 and I bought it for just north of $15. Single blades cost this much! Freud/Diablo blades, and their sandpaper, are one of the best for performance and life at an affordable price. (See some of the YT video reviews.) I had a large shed door to fix after recent high winds tore it off. This blade made short work of cutting out the broken 2 x 4 where the hinge was, cutting through the screws and nails like a hot knife through butter, as well as cutting the hinges. Other than the paint coming off, the blade was untouched and the teeth were still perfect. The blade design has a higher tpi for metal on the half of the blade nearer the tool. In my case, that didn't help on the 2 x 4 as the screws had to be cut by the farther end of the blade since it was 9" long and access was limited. The higher tpi was still able to cut the screws though. When pruning trees, the fastest cut is at the far end where the lower tpi is. The cut speed was noticeably slower using the fine teeth. Of course, you can't rest the pivoting shoe against the wood to reduce vibration to use that lower tpi with this design, which is a little awkward. It's a combination blade, so you have some compromises for a "one blade fits all" design. These are good blades!

I used these for a few weeks before writing a review. By these, I mean one of them as it's still going strong. I've used it on hardwood, softwood, cement, roots with the occasional rock encounter, and cut through some embedded hurricane fence in the process. I had zero chipped carbide teeth and no bending. Durability earns a definite 5 star rating. I've used it pretty heavily for three straight weekends and it's cutting like it did when new. The paint's partially worn off - that's it. Value for money might be a 4-5 star but until I wear out the first one I'll stick with five. They're a bit pricey, but if they hold up twice as long as the blades my DeWalt sawzall came with they're a good buy. I was sent the 4 for the price of 3 pack (not advertised as such), but base my rating on a 3 pack. The dual TPI blade is a nice feature. I used the higher TPI half for harder materials and to start cuts on wood, then used the coarser half to speed up wood cuts. Bottom line a truly general purpose blade that cuts quickly and resists bending and breakage. It also reduces blade swaps because of its durability and versatility. Worth the money.

Best saw blades for tougher jobs

Kind of slow cutting through nail embedded 2x4s but fast cutting through steel.

These blades are great. They last a really long time, can cut metal/nails and keep going, and tear through wood. Once you've tried the carbide tipped blades, you'll never go back to a normal bi-metal blade. Even though they cost more than a bi-metal, they last many times longer than a regular blade, and cut much faster, saving your a lot of time. When they eventually break, it will likely be at the end of the tang where it inserts into the saw. Too much twisting or binding of the blade is the death knell. I never actually wore out the carbide- they always snap off. My only complaint on this order is the packaging is odd- maybe the seller is repackaging from larger lots? Usually these come in a sturdier package with some manufacturer label. Hopefully these aren't counterfeit.

These blades are some sort of witchcraft. They just cut and cut and cut. They also stay suprisingly cool while using them in some pretty thick stock. So one drawback is they do take a little longer to make a cut compared to traditional blades but they last about 15 times as long. Besides holding up well and staying cool, they leave a beautiful edge with minimal burs.

I still have 2 fresh blades. I’ve used one for daily demolition for months (this thing gobbles nails), and cutting roots in trenches. Most blades are ruined after days of cutting roots still buried in dirt, but not these.

Diablo has Good Products Happy with purchase.Thx Carlotta

Avez vous vu des vidéos de lames qui coupent des clous et vis dans des planches ? Ben vous pourrez reproduire ça chez vous avec ces lames. J'ai utilisé ça avec une Ryobi RRS18X-0, je suis très satisfait de ces lames.

works great

Excelente!! Superou minhas expectativas !

Soy profesional, utilice esta hoja de sierra para cortar una llave de esfera de 2" de latón, la verdad es que la corto bastante bien.

Lo utilizo para reparar Tarimas de madera para montacargas