5×3 FT Outdoor Storage Shed, Metal Storaged Sheds Without Floor, Tool Sheds with Lockable Doors and Slooping Roof for Garden, Patio, Backyard, Gray | Metal Storaged Sheds Without Floor, Tool Sheds with Lockable Doors and Sloping Roof for Garden, Patio, Backyard

This shed took about 2.5 hours to assemble with my wife’s occasional help. I’ve seen other reviews say this is a two person job and for the most part that’s true. However, if you have something like saw horses or ratchet straps or really anything that will support the vertical portions without you having to hold them, then it’s a one person job. The pros: - this shed is a GREAT value for the money. A huge cut above anything I could find at Walmart or Sam’s or Home Depot, etc - it’s fairly easy to assemble if you’ve got an impact driver. Don’t buy any means use a screwdriver unless you’re just a glutton for punishment. You sometimes need the extra force of the impact driver to bring the metal into the correct position. The thing is somewhat sturdy on its own. It’s heavy enough that someone couldn’t just pick it up and throw it or something to get to the contents. It’s got a plastic coating which I did NOT tear off because I figured it added to the weather protection Cons: - unless you’re a short person you won’t be able to stand up in it. The thing is pretty short. But then again it’s a storage shed. You’re probably not gonna be walking around in it. - The screws provided are incredibly small and I wouldn’t trust them to hold up to much - The thing is fairly weak overall. If I fell into it I think I’d bust through the walls. And if two people wanted to get your stuff, then all they’d have to do is stand on either side and pick up the shed since it does not have a bottom - The included latch is flimsy and so is the hardware. But again, you’re paying for the shed, not top quality hardware. Again, that’s an aftermarket thing. - The thing is not super waterproof. Water WILL get in the bottom. I haven’t observed yet whether it gets through the roof or the sides but it definitely gets through the bottom if there’s nothing under it and it’s open at the floor - Overall, it’s a cheap shed and you get what you pay for, but if you do what I suggest below, you get a really quality shed. TO MAKE IT BETTER AND STRONGER: I set out to reinforce this cheap budget shed and make it at least a bit more intruder proof and make it not feel like it’s blow away with some heavy winds. It cost me an extra $70 or so at Home Depot if you already have some basic tools (drill, impact driver, circular saw, screws) Here’s what I did (see my pics and video in the post) if you’re even a slight bit handy you should be able to do this. 1. I laid five concrete blocks ($2.98 each) on the corners and center of the bottom. This helped to weigh the shed down and provide a raised platform so water running under it wouldn’t automatically touch the contents of the shed. (I live at a rental property so I couldn’t do anything drastic to anchor it. If I owned the property I would’ve used concrete anchors through the base into the slab on my back porch or I would’ve used rebar to hold it in the ground like stakes. Lots of different options to anchor it to the ground) 2. I bought the cheapest plywood I could get that had some sort of weather coating on it. It was $14 for a 4x8ft sheet at Home Depot. Don’t remember what it was called. Other options could be buying a sheet of plywood and painting or coating with epoxy to help it not rot. Really anything like that’d work. I cut it to the dimensions of the base and sat it on top of the concrete blocks 3. Next came framing (something I’d never done before this, so you can do it too). I bought a 8ft piece of 2x6” pressure treated wood and two 12ft 2x4” pressure treated wood. I cut the 2x4s into four vertical pieces to serve as studs in all four corners of the shed. I anchored these to the shed usIng Tek wood-to-metal self drilling screws that I already had on hand. Lots of different screws would work but these got the job done. I used a combination of 1 3/4” screws and 3” screws going down the side. I then used the 2x6s to make shelves running perpendicular to the 2x4s. They were attached with cheap decking joist things (not sure what they’re actually called, you can see them in the video). They were similarly secured with tek screws. 4. Use an assortment of hooks or whatever you like to hang things from the “shelves” and organize that bad boy! 5. Lastly I upgraded the lock. For $8 at Home Depot you can get a much nicer locking mechanism and secure it with stronger bolts than the provided ones. Haven’t gotten around to installing the lock at the time of writing this but it’s not hard. 6. Optional: I didn’t do this but if you want to make extra sure you don’t let in the elements or cause you’re shed to rust, you could use finishing washers with every single screw OR go back and slop some sealant over each screw to make it airtight. I’m not too worried about that though. Prior to doing this I searched high and low to find a tutorial for how to make this stronger and I couldn’t find anything. Literally seemed like no one had ever done this which I find hard to believe. So I share this to say that I’m not overly handy but I could do it. Total extra cost was around $70-$80 so for about $200 you can have a REALLY solid shed. Hope this helps somebody.

This little shed fooled me a bit when I watched the video of two people, smiling and putting it together. I didn't have the luxury of having a second person since I have learned recently to never ask my wife to help me build anything. I completed 7th grade wood shop class back in 1988 and thought to myself that I should be solid to build this little shed. Overall, it probably took my a total of 8 hours over the course of 5 days. The pieces to the shed were pretty banged up. I don't blame the manufacturer for the delivery issue. The pieces are pretty thin so I just bent it back in place. The pieces were poorly labeled and I struggled from time to time to find the right piece. Finally, the instructions only have pictures and no written instructions. Again, I have my challenges around putting things together but the instructions could have been a little easier. Overall, if you have the skill set to build items with little direction then you should be fine. It's a pretty good value for all the headache that it caused putting it together.

This is an amazing shed for the price. You need to choose and build your own base. Everything goes together perfectly but because the directions don’t have word I got a number of pieces backward or upside down. If you get to a point where the holes are not lining up you probably just need to check if you have the part the wrong way or on the wrong side. They maybe give you one or two extra screws per type so if you are going to build on the grass like I did you may want to make sure you do t drop any! Also if you use a drill, which makes it so much easier, make sure you don’t strip out the screws. Great shed. I might buy another to make a playhouse for my daughter! Oh, also don’t build on a windy day!

This is listed as a rainproof outdoor storage. It’s not. The doors are warped and no amount of torsion will align them. The box has zero damage, but three pieces were badly deformed/bent and needed straightening, including the frame for the doors, which I could not straighten. It comes with no tools and so-so instructions. The shelves will warp with any real weight placed on them and the shelf hangers fall out constantly unless they have something on them to weigh them down. The top shelf fell out when installed and was so thin it bent it. As for water proof? There’s is a 1/4 inch gap at the hinge side of the doors and a 1/2 inch gap where the two doors meet. Magnets are suppose to keep the doors closed, but they don't. There are no overlaps between the door halves to prevent water intrusions, so it’s going to get very wet, very fast. There is no latching system other than magnets unless you attach a padlock (which still allows the doors to open 1/2-3/4 of an inch). I stripped 2 of the screws trying to install the door hinges and finally just left one screw out as I could not get a screw to fully seat in it. The base/floor pan is cheap tin with limited supports and bends if you put anything on it. placed on soil or grass, it’s going to corrode and or sink into the ground quickly. I would send this thing back but I’m not wasting my time to disassemble and box it back up.

I am not necessarily one to write reviews, but I did want to mention some things to hopefully help a potential buyer. As the title states, you get what you pay for. After the build process, I can say that it is a seemingly sturdy shed, decently sized to fit a good amount of yard tools (things like a wheel barrow and seed spreader, gardening pots, brooms, rakes, shovels, etc.), and it appears to shelter well enough against wind a rain. Once it was built, I was overall happy with it. On to the issues. with building.. The process starts easy with the base (really just a frame, not a full base. Spent an extra $40 at the hardware store on pavers and wood slats to make a floor) and the walls going up without any issue. Once we got to the roof installation, issues arose. Holes were not lining up at all, the instructions failed to show as much detail as the beginning did, and things didn't make sense. We had to drill our own holes in both the roof panels and the pieces to attach the roof to the shed all because none of the holes lined up. Then, once we got past all of that and started working on the door, the lock mechanism was not aligning. Again, we had to drill our own holes and make it work. This really wasn't the end of the world if you had the right tools and patience/know how, but it was frustrating nonetheless, that it required more than what the directions suggested regarding time, tools, people, and extra reinforcement for the base. At the end of the day, we got it up and it is functioning well. You just have to be prepared to spend a bit more time/money to balance out the low cost of the Amazon shed itself.

Better than expected and very cute! Not hard to assemble, just go slowly and match up the parts carefully. No shelves included.

Took my boyfriend and I almost all day to build it but it turned out great! Definitely need two people, at least one to just hold things in place while the other person screws it together. Small, but big enough for our extra junk we only use occasionally. Love that it has a bottom included and is pretty gapless when its put together, so I feel like bugs won't be a big problem.

Honestly, for the price this is a great option. Keep in mind it is not perfect but i think it is worth it. Will need to make sure you build a strong stable base to go under the shed. We built a wood platform/deck to hold the shed. The doors are a little wonkey and do not like to close properly without some wiggling around. There are also some gaps in some areas once the shed is put together but some spray foam easily closes that up. It looks good and is really worth it. I would recommend it. It holds a lot of items. Be careful the material is very sharp!

Es muy funcional y es justo lo que esperaba. Muy buenos materiales, es algo complicado de armar pero en si es un buen producto.

La lamina es muy delgada y algunos orificios no cazan, algunas piezas llegan dobladas, pero en general funciona le mande a hacer un piso de lamina y quedo muy bien, por el precio es un buen producto...

Me gusto porque puedo almacenar muchas cosas y que se mantengas resguardadas. Lamentablemente me falto una pieza y no me di cuanta hasta el final. No deseo devolver, lo que necesito es la pieza faltante. La pieza es W1A

TERRIBLEE!! venía con láminas dañadas , viene incompleto, le faltaba tornillería, chapa, bisagra. Además vienen dos lados derechos y ellos me proponían ponerla al revés y yo hacer las perforaciones, y la mayoría de las perforaciones tampoco coinciden.No tuve solución del vendedor, y me quedé con un producto carísimo q no sirve para nada. Pésima experiencia, no lo recomiendo.

Es un gabinete con muy buena relación calidad/precio. Hay que armarlo y si se hace con cuidado es fácil aunque laborioso. Se requieren necesariamente dos personas para el armado y todas las piezas coincidieron sin necesidad de hacer nuevos agujeros. Algunas láminas llegaron un poco golpeadas pero para el uso que se les va a dar no representan ningún problema. Se pueden enderezar fácilmente.