10Gtek 1G 1000Mbps Gigabit Ethernet Converged Network Adapter (NIC) with Intel I350AM2 Controller, Ethernet PCI Express Network Card, Dual Copper RJ45 Ports, PCIE 2.0 X4, Compare to Intel I350-T2

If you are building or expanding a home server or NAS setup, finding network hardware that is both budget-friendly and rock-solid is always the goal. The **10Gtek Single-Port Gigabit PCIe Adapter (Intel I210 Chip)** delivers on all fronts, offering genuine enterprise-grade reliability at a fraction of the cost of official Intel-branded cards. Packaging & Hardware Revision * **Safe Delivery:** The card arrives exactly as pictured and described, safely packaged in anti-static protection to keep the sensitive electronics secure during transit. * **The Heatsink Upgrade:** I was one of the lucky ones who received the newer revision featuring a **dedicated heatsink** directly over the Intel I210 controller. While Gigabit cards generally don't run as hot as 10GbE gear, having passive thermal cooling adds extra peace of mind for 24/7 server environments. --- Key Specifications * **Controller:** Intel I210-AT * **Interface:** PCIe 2.1 x1 (compatible with x1, x4, x8, and x16 slots) * **Speed:** 10/100/1000 Mbps (Single RJ45 Port) * **Brackets Included:** Standard profile + Low-profile bracket * **Feature Support:** PXE, Wake-on-LAN (WOL), 9.5K Jumbo Frames, Linux Network Bonding --- Installation & OS Compatibility (OpenMediaVault / Linux) The highlight of using an Intel I210-based card is native kernel support across virtually all modern Linux distros. Under **OpenMediaVault (OMV)**, the card is **truly plug and play**. There is zero need to compile kernel drivers, run scripts, or mess with the command line. You simply seat the card in your PCIe slot, power on the system, and OMV picks up the new interface immediately. Performance & Multi-Port Network Bonding (Mode 6) I added this card as an extra Ethernet port alongside my motherboard's onboard NIC to connect two physical cables directly to my router. * **No Managed Router/Switch Required:** By setting OMV to **Bonding Mode 6 (`balance-alb` / Adaptive Load Balancing)**, the server handles load balancing internally via ARP negotiation. This means you don't need a high-end router with LACP/LAG support to get the extra bandwidth! * **Increased Aggregate Throughput:** Connecting two cables doubles the total system capacity, allowing simultaneous heavy uploads and downloads across multiple clients without bottlenecking a single link. * **Superior to Realtek:** The Intel I210 excels at handling hardware-offloaded network traffic and ARP negotiation, keeping CPU overhead minimal and performance stable during multi-client transfers. * **Zero Dropped Packets:** Rock-solid stability with no driver crashes, latency spikes, or dropped connections under heavy continuous load. Verdict For anyone running OpenMediaVault or a custom Linux server looking to add an extra port for link aggregation without buying expensive LACP-compatible switches, this **10Gtek I210 NIC** is a no-brainer. Getting the updated heatsink version was a great bonus, and the true plug-and-play simplicity makes it completely hassle-free.

When building a Linux system the last thing you want to deal with is weird drivers. So I always look for Intel or Broadcom chipsets in ethernet cards. Intel chipsets in particular are pretty much guaranteed to work. Most of the servers I build have Intel I350 ethernet cards for a reason. They're fast, reliable, and use the rock-solid "igb" driver that you can be absolutely certain will be included in the stock kernel from any Linux distribution The I350 controller chip has been in production since 2011 and Intel plans to manufacture it through 2031. It's fast, reliable, inexpensive, and uses only 2.8W of power. Those features, combined with the high availability of the chip has made it ubiquitous on server motherboards. As a result it's extremely well supported by any operating system you might want to use. Thie PCI interface on the card identifies itself as being built by Beijing Sinead Technology Co. The ethernet MAC address has the correct prefix (98:b7:85) for Shenzhen 10Gtek Transceivers, which matches the name of the seller on Amazon. That's always a good sign; they're using properly assigned MAC addresses rather than just cloning some other card. The card appears to be identical to the I350 cards sold by Intel. The only difference is the price, which is less than half what Intel charges. I'll probably buy more of these in the future. Great pricing and like the other 10Gtek products I've purchased in the past it's a solid product.

Very good product and working fine with pfsense and good performance with suricata IPS inline mode. pciconf -lcv #Output of pciconf command on freebsd. igb2@pci0:3:0:0: class=0x020000 card=0xa03c8086 chip=0x10c98086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82576 Gigabit Network Connection' class = network subclass = ethernet cap 01[40] = powerspec 3 supports D0 D3 current D0 cap 05[50] = MSI supports 1 message, 64 bit, vector masks cap 11[70] = MSI-X supports 10 messages, enabled Table in map 0x1c[0x0], PBA in map 0x1c[0x2000] cap 10[a0] = PCI-Express 2 endpoint max data 128(512) FLR link x1(x4) speed 2.5(2.5) ASPM disabled(L0s/L1) ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected ecap 0003[140] = Serial 1 6cb311ffff1b17c0 ecap 000e[150] = ARI 1 ecap 0010[160] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI disabled 0 VFs configured out of 8 supported First VF RID Offset 0x0180, VF RID Stride 0x0002 VF Device ID 0x10ca Page Sizes: 4096 (enabled), 8192, 65536, 262144, 1048576, 4194304 igb3@pci0:3:0:1: class=0x020000 card=0xa03c8086 chip=0x10c98086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82576 Gigabit Network Connection' class = network subclass = ethernet cap 01[40] = powerspec 3 supports D0 D3 current D0 cap 05[50] = MSI supports 1 message, 64 bit, vector masks cap 11[70] = MSI-X supports 10 messages, enabled Table in map 0x1c[0x0], PBA in map 0x1c[0x2000] cap 10[a0] = PCI-Express 2 endpoint max data 128(512) FLR link x1(x4) speed 2.5(2.5) ASPM disabled(L0s/L1) ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected ecap 0003[140] = Serial 1 6cb311ffff1b17c0 ecap 000e[150] = ARI 1 ecap 0010[160] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI disabled 0 VFs configured out of 8 supported First VF RID Offset 0x0180, VF RID Stride 0x0002 VF Device ID 0x10ca Page Sizes: 4096 (enabled), 8192, 65536, 262144, 1048576, 4194304

Recognized immediately by Windows 11, worked flawlessly from the start.

First, let me say that I'm an IT professional with over 30 years of experience. I know what I'm doing when it comes to building computers and firewall systems! I bought these cards after reading that other buyers had used them with pfSense without issues in the reviews. Unfortunately, none of mine would work out of the box with pfSense, OPNsense, IP Fire, or any other BSD or Linux based firewall I've tried (I tried 7 in all). I've tried all 3 cards I bought in 3 different computers, so I know it isn't the motherboard that's at fault. I have a hard time believing that all 3 cards I bought are defective, but it sure looks that way. If these cards don't work in a Windows box, I'm sending them back! I was going to try loading the drivers included in the box, but the driver CDs don't work, either. I've tried all 3 of those in 3 different drives on 3 different computers. Complete waste of my hard-earned money! Edit: After leaving my review above, I was contacted by the seller. They were apologetic that the NICs didn't meet my needs and offered a full refund, which I gladly accepted, without trying them in Windows. We made arrangements for me to ship them back, and I was refunded my money once the cards arrived. I did have to pay to ship the cards back, but I'm out a LOT less than I was before (less than the cost of one card). I will not hesitate to buy other products from this seller again. I must give them kudos for doing their best to rectify the situation! I appreciate the integrity this shows on their part.

Not a technical review but my experience from being a sudo-tech. I have a TrueNAS only to host content for Plex. If Plex wasn’t a thing I would never have built two machines over the last seven years. The first one was dated two years ago easily so I had to upgrade. I bought a older MB but still lights out better than before- a ASRock B550 Pro4. What I didn’t know was that MB has a RealTek ethernet chip. I pulled everything in and all was well. I went to move data and my network started to drop. After seeing that I saw an error on the TrueNAS about the network. After researching the problem was the RealTek 2.5. I then bought an Intel 2.5 and found that those don’t have proper driver so that was returned. Then I found reviews about this 1G card and bought it. Immediately plugged in and worked with no extra effort from me. Moved big data files with no errors. I was relieved. How long will this last? I will see. I wish I could have gotten the 2.5G to work to stay up to date but that is fine. On to the next problem!

First, let me say that this is a good product. I used it to take advantage of SMB Multichannel between my main Windows PC and my FreeBSD based TrueNAS box. The card was recognized right out of the box on both OSs. The included driver cd does not seem to actually do anything, and the included Intel Proset LAN utility software cannot be used to control the ports. Its nothing you cant do in device manager in Windows, but it is wierd. One huge thing to take into account with this card is that the 1.25Gbps bandwidth is shared between the two network ports. Meaning that you can get at most 154MBps out of it. If you need a multi port NIC, look at server specific hardware.

I 'm using an old 4th Dell Optiplex for a home Linux project, but more I started to bog down it's built in "Intel I217-LM" Ethernet, the more often the whole adapter would eventually crash completely. I asked AI of course, and it suggested I get a new NIC that uses a different driver. I'm not sure why, but it's AI. You just do what it says and don't question it. The Built-in Ethernet used an "e1000e" driver, while this product uses an "igb" driver. Now I can't say I know for sure why that other adapter was failing, or if the driver has anything to do with it. It was honestly easier to bypass it than troubleshoot it. This new adapter works perfectly so far. 100% stable. Problem solved. Just to clear up any confusion from other reviews. This IS an adapter that uses an Intel I210 chip (Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)). As such it is an Intel "based" 3rd party adapter. It is not an official "Intel Network Adapter" in the sense that the entire product is manufactured and marketed by Intel. You can get those if you want to pay 5+ times as much. But when you plug it into your PC, it's an Intel I210 adapter, period. It's not Asmedia, Realtek, etc., though if you're not careful some of the other similar looking variants listed by the seller as alternatives are different chipsets. Description Accuracy: One image on the product page that indicates that you will randomly receive one of two different products: (Old Version) or (New Version). Old version being a larger looking green PCB board with no heat-sink, while every other image in the listing shows a cool looking little black card with a big red anodized heatsink. I'll just say flat out, I think it's deceptive to list one product and hide an image that suggests you might get a substitute, even if it's the same chip, and I think there's better ways for the seller to clear out that old stock. It also makes it impossible to trust reviews because you can't be sure what card they're describing. Fortunately, I got the one I expected to get when I ordered, the one with the red heat-sink, or it was going to get returned. Now...the product itself still gets 5 stars, because it's affordable, functional, *genuine*, and has exhibited exactly ZERO errors since being installed. I hope the seller will clear up ambiguity though. Here's some of the network statistics since I installed it a couple days ago. It's not a stress test, but it's been fairly busy: --- (sudo ethtool -S enp1s0 | grep -Ei 'rx_bytes|tx_bytes|rx_packets|tx_packets|rx_errors|tx_errors|rx_dropped|tx_dropped|rx_crc_errors|rx_missed_errors') rx_packets: 14895029 tx_packets: 20732530 rx_bytes: 9638752735 tx_bytes: 18997563185 rx_crc_errors: 0 rx_missed_errors: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 --- Here's it's capabilities and other useful stats: --- 01:00.0 Ethernet controller: Intel Corporation I210 Gigabit Network Connection (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 IOMMU group: 2 Region 0: Memory at f7900000 (32-bit, non-prefetchable) [size=1M] Region 2: I/O ports at e000 [size=32] Region 3: Memory at f7a00000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at f7800000 [disabled] [size=1M] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [70] MSI-X: Enable+ Count=5 Masked- Vector table: BAR=3 offset=00000000 PBA: BAR=3 offset=00002000 Capabilities: [a0] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0W DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [140 v1] Device Serial Number 98-b7-85-ff-ff-25-39-10 Capabilities: [1a0 v1] Transaction Processing Hints Device specific mode supported Steering table in TPH capability structure Kernel driver in use: igb Kernel modules: igb ---

Je souhaite mettre les NIC sur esxi 7 impossible !!! Expliquer moi comment faire svp

La tajerta funciona tiene 2 puertos independientes, pero no importa si usas linux o windows, la tajeta dice que puede funcionar a 1gigabit, pero jamas enlaza a 1gbit, enlaza a 100mbit, ahi mismo donde otras tarjetas funcionan bien a 1gbit, esta no.

I purchased this for use with my new gigabit installation at my house. Slapped it into my pfsense box and I'm getting a very nice 950mbps down and 95mbps up WAN>LAN with no problems and noticable increase in CPU usage as a result of the NIC. Very nice. +1 for the inclusion of a low profile bracket.

正直あまり信用していなくて互換性を心配していましたが、ESXiの起動メディアに何も追加せず（Inboxで）認識して動作することは確認できました。安定性、耐久性は未評価です。

Use it for pfsense and work right out of the box