10Pcs Insulated Safety Straight Seal Protection Shrouded 4mm Banana Plugs Solder DIY Banana Plug Connectors for Multimeter Test Leads Ends Probes Adapters

Works great! Good quality, would recommend and purchase again.

Very well made, nice product.

These are good quality. I wouldn't hesitate to buy them again. I was having trouble seating the banana plug in the sleeve. I came to see the reviews to see if others had this problem, and looking for suggestions. One said to heat the sleeve. I got out my heat gun, put it at low heat and heated each of four sleeves before inserting the banana plug (which had been impossible). As that reviewer said- it was "easy peasy".

Bought these for a power supply but realized my mistake, these are designed for multimeters. I tried to "dry fit" the connector into the insulator (sleeve), tried and tried would not lock in. I applied heat to the connector from a soldering iron and got the connector to slide in. As far as it not working on a power supply, simply cut back the sleeve using a razor knife. I had to remove the red plastic tip and use a grinder to remove sone of the nub, don't completely remove it! Use flux and a leaded solder when connecting the wire, mine was 12 ga and worked perfect. All in all, I would recommend even though cheaply made.

Applied these to the ends of 14 Awg (15 Amp) stranded silicone leads for a power supply. At first had difficulty inserting the plug into the shrouded housing. Decided to lightly heat the plastic shrouded housing in the vicinity of the engagement (SMD hot-air pencil) and use a mating gender to push the plug into the housing until seated, allow to cool, worked perfectly.

Decent value.

Once I figured out how to install them great. Solder the wire with the cover on the wire but away from the metal. Then with very hot air gun heat the metal while it is in a vice and the push plastic onto the metal plug. If hot enough, very hot, the plastic should slide right and when cool will not come off. These are maybe one time use but I guess you could do the reverse and put the plastic back off.

Earlier I ordered 4 mm banana plugs that were specified as speaker plugs. Didn't fit any multi meter jacks due to the larger spring diameter that had too much insertion pressure. This 4mm set is made for test equipment and fits as expected with a smooth firm insertion without too much pressure. Very happy with this connector set. Would buy again.

Si pueden agregar un video sobre cómo ensamblarlos sería útil

The variety of colors adds convenience, and their design is perfect for DIY projects. Highly recommended connectors for reliable and secure electrical connections.

All good