KLOKIAK SUPPLIES A4 Waterslide Decal Paper INKJET Clear – 20 Sheets – DIY A4 water slide Transfer CLEAR Printable Water Slide Decals A4 20 Sheets

First time using this kind of paper for transfers to make a “pool rules” sign. I used my inkjet printer, forgot to change the paper size to A4..my bad... just learn from my mistakes so you don’t forget to change your paper size because it makes a huge difference! But anywho, I followed the directions and made sure to seal it using my favorite, Krylon Triple Thick clear sealer. That stuff is amazing! I did three coats just to make sure I got everything good a sealed. I then used the sheet I messed up printing the wrong size out for practice and I was amazed at how easy it was! What I learned... * make sure to seal very well. This will be the key to your success. * don’t soak paper! I used a little craft spray bottle of warm water and soaked the back of the water slide decal paper and the decal just started peeling off on its own when it was ready!! I couldn’t believe how nice and so much easier that was rather than soak the whole thing. * from reading other reviews, I purchased the silicone makeup spatulas. Best advice ever! Those things made it so much easier to grab the edge of the decal and place where I wanted it to go and then used it to smooth and get all the water and air bubbles out. I highly recommend that you purchase those along with this paper especially if it’s your first time like mine. * let’s talk about the negative reviews for a second... what I’m seeing is that people aren’t SEALING correctly if at all. People, read the instructions and other peoples tips for using these! You will learn so much by just taking the time to read!! Overall I’m extremely satisfied and will definitely be purchasing again. Since it was my first time using them I think my project turned out very good but I think I’ll redo it in the future BUT it wasn’t because of the decal, it was because of my design and the colors I used were to dark. Lesson learned! Also when I sealed my finished project, the wind kicked up and got little pieces of crap sealed with it. Another lesson learned!

Below I have my original review, but after being contacted by the company I agreed to try the product again, free of charge. They told me it was likely a bad batch and unfortunately this can happen with any of the brands (see other brands reviews as well). I reordered and was able to try again tonight. OH MY GOODNESS what a difference. I printed, sprayed and dropped it into a bowl of warm water. The image started to lift after 10 seconds....WORLDS different than my original experience (see below). It worked and it worked easily! I'm thrilled. Now I can complete my projects and I do see what all the fuss is about! Excellent product, and if yours isn't DO NOT HESITATE to let them know. Customer service was amazing. I'm so glad I tried again. Now off to finish the rest of my project! (original review with the faulty batch) I tried everything and I could not get the transfer to separate from the white backing. When I was finally able to separate the image was imperfect because it either had white backing remaining or it was mangled from trying to separate form the back. Was really disappointed. Will be trying another brand.

Well it was my first time using this & I had many failures only to realize I wasn't putting enough acrylic spray coats to harden the decal. On the whole it's not an easy thing to work with but that's no fault of the product. This brand was actually very easy to use I used it with mod podge acrylic spray. Dont be afraid to spray, it really needs at least 4 good coats before you can use the decal. Once you let it dry properly between coats you'll have no problem, the timing is right when you put it in water just 30 - 40 secs and it slides easy. Once it's one you have to get all your bubbles & water out. I have teared some trying to do this but I guess practice keep at it, heard some ppl say to heat set it after gonna try that soon & see if it dries faster once you're done.

Perfect. Bought this to use for decals on tumblers. Never used water slides before. The image printed prefectly in my inkjet printer. I sprayed 3 coats of satin clear krylon with about 15 minutes time between coats. Cut it out and put it in room temperature water for about a minute and transferred it to the cup. Perfect, smooth and easy. This was my first attempt and I expected some issues but there wasnt any. I will be buying this again often.

I read the previous reviews and some people love this one and some hate it. I guessed that the people who loved it were ones who followed the directions and sprayed it with sealer and stuff so I went ahead and bought it. Well... I can't get what I want to work. The decals I want to use are long and skinny and that seems to not go well. They wrinkle and stretch and the printed part cracks because of the acrylic spray and it gets all muddled looking if you try to correct it. If I make small round shapes it works ok. Some of them bleed even though they're coated. They seem to bleed through the underside. I put one on my thumbnail and my nail is now stained. I wanted to use these to make customized gel pens. It really doesn't work for that at all. Unfortunate.

I chose not to use the varnish per the instructions, as it tends to turn projects kind of yellowish, Instead I used Rustoleum 2X Ultra cover Clear Gloss which is uv protected, bonds to plastic, and gives the decal a Bang! Ink dries fast, 2 X ,clear gloss, dries within 24 hours, Ink application using inkjet printer looks great! Also sticks with minimum bubbles and slides off backing paper easily after 30 sec. soak, can be re-positioned also which is a plus. I put the test decal on my printer to see it's adhesiveness, before doing other projects. Tough material, Ships fast, Very pleased...I will be buying again!

This product was awesome. My pictures printed clearly and I had no issues applying them to my project. If you use an Ink Jet printer you do need to seal the images so the ink won't run. I used glossy Modge Podge Spray sealer. I sprayed about 3 times letting each coat dry for about 30 minutes before applying another coat. Will definitely order these again!