AV Access デュアルモニター対応 4K KVMドッキングステーション KVMスイッチ ノートPC・デスクトップPC対応(iDock C10) | 1Gイーサネット、EDIDエミュレーション、USB-Aポート×5、HDMI 4K@60Hz対応 USB C KVM切替器、2モニター・2台PC対応、ノートPC最大60W給電、ホームオフィス向けワークステーション対応

会社用ノートpcと個人用デスクトップpcを切り替えるために購入しました。どちらもwin11です。 この手の製品を色々試した中で、1番良い感触です。ハブを使用するとciscoのWEBカメラ（USB3.2）がよく動かなくなったり、画面の画質劣化やノイズが発生しますが、この製品は一切問題ありませんでした。 WQHD2画面でしっかり映像も映ります。 切り替えも4秒ほどですぐ操作可能になり、usb接続しているマウスやキーボード、マイクも問題なしです。 気になる点を挙げると、ノートpc出力映像のリフレッシュレートが120から60に下がってしまいました。デスクトップの映像は144でます。 業務に使ううえではリフレッシュレートを必要としていないので問題ありませんが、ちょっと残念です。 また、本体の物理ボタンではなくホットキー(ctl-ctl-enterのような)に対応してたらありがたかった。本製品はおそらく未対応。 色々なkvm付きハブに苦しめられてきたので、思い切って3万円払いましたが、ちゃんと動きます。正解でした。 ---3か月経過後追記 本製品を介してのモニター接続時、G-Syncが使用できないことに気づきました。私の目は節穴なのか、まったく気づきませんでした。 また、そこそこの頻度で、Windows版Apple Musicの起動と停止時にモニター①の映像だけ2秒ほど途切れるという不思議な事象も発生するようになりました。 この製品を使用しないと途切れませんし、Apple Musicを除くソフトの起動停止では発生しないので、とても不思議です。 このような事象が発生しても、他社製品と比較すれば圧倒的にマシなので、不満はないです。

PC側のhdmiが接続不能だった。一回繋がったのだが、以降ずっと駄目ですね ハズレ個体かな、、、 信頼できるメーカーから買ったつもりだったのでショックです。 問い合わせてレビューアップデートします。 ※追記 自分の使い方が間違っていました PC側のhdmi inはhdmi outの2番に繋ぐ必要がありました。 さらに、AV Accessさんから謝罪の連絡と返品手続きの案内が丁寧にきておりました。 自分の確認不足なのにすみませんでした。 その後は快適に利用できておりますため、星5に訂正します。

99% of work perfectly, but the 1% where I need to turn on/off the monitor or plug/unplug the laptop is bit annoying

初めてkvmスイッチ購入したけど、切り替え時のラグが少し気になるけど、こんなものかな？頻繁に切り替えるような用途で使わないなら許容範囲

ようやく求めていたノートPCとディスクトップPCの切り替えが出来るKVMにたどり着いたと思い、商品が到着し早速繋げてみると最初は問題なく表示されていたので良い買い物をしたと思ってた矢先、最後にLANケーブルを接続したところUSBーC接続のノートPCがディスプレイに表示されなくなりノートPC自体もフリーズ。PCの再起動や本製品の電源抜き差しにケーブルを変えたりと色々試してみたがその後表示されることなく諦めました。電力不足でしょうか？本製品の発熱も凄くて長時間使用に耐えうるのか？と心配にもなりました。残念ながら返品処理することに。求めているKVMはいつになったら手に入るのでしょう・・・

機能的には満足。 発熱が凄い。 耐久性大丈夫か不安になる。

元々C12を使っていたのですが、紆余曲折ありこの商品を購入しました。 ドッキングステーション＋KVMの機能を実現している製品が少ない中で、基本的にはユーザー思っている様な形で使える製品だと思います。 ただ一つ難点としては、D-portとHDMIの入力をHDMIに出力しているのですが、1週間に1回位起動時に画面が真っ青で何も映らない時があります。この時はケーブルの抜き差しor本製品の電源抜き差しで改善するのですが、ここだけちょっと惜しいです。この不具合さえなければ★5なんですが…

仕事で使っているノートPCを自宅で使用する為に購入しました。 ケーブル１本で自宅のキーボード、マウス、有線LANに接続し、充電までやってくれるので便利です。 また、自宅のデスクトップPCとの切り替えもボタン１つで可能なので私のニーズにとてもあっていました。 ただ、ディスプレイには４Kまでしか対応していないので、自宅の５Kディスプレイには対応できず 結果ノートPCには２本のケールを接続して切り替えはディスプレイのボタンを使用する形になっています。 唯一ここだけが不満点となります。 ５Kや８K対応の製品が発売されれば迷うことなく、また購入させていただきます。

Quite expensive, but it is very good...no issue at all

The AV Access iDock-C10 has been a practical solution for managing my dual-system setup. I regularly switch between an M1 MacBook for work and a Windows gaming workstation, and finding a KVM switch that supports both consistently has been challenging. After trying several other options with limited success, I had resorted to using two keyboards and mice alongside switching inputs on my main display. The real challenge always seems to be passing the EDID for the Mac through a peripheral, and this dock just hasn't had that issue, and consistently passes accurate display information to the Mac. The iDock-C10 has made a noticeable difference and freed up a lot of space on my desk. The setup was straightforward, and it works reliably with both machines. The USB-C connectivity is particularly convenient for the MacBook, allowing for video, power, and data transfer through a single cable. Even though the Apple silicon machines reintroduced an dedicated HDMI out, it's nice to just have one cable to dock it. Switching between devices is quick, and I haven’t experienced any connectivity issues or delays beyond the an expected brief moment for the keyboard and mouse to re-engage when being accessed by the alternative machine. I do appreciate the fun trick of being able to mount an external drive to one, eject it, and then have it show up on the other. A little thing that I wasn't even looking for. I will mention that I use a single display externally, and I believe this might not support two separate displays (from my mac at least) from the documentation. So keep this in mind. My set-up actually calls for a duplicated display because I send it to a projector to do video/media work in my home studio. So, the way this outputs from the mac is a feature for me, not a limitation! I really appreciate the compact design, which keeps my workspace organized, and the device handles peripherals like my keyboard and mouse without issue. I really prefer a full mechanical keyboard, and this has allowed me to keep only one out... with a little special key remapping on my Mac, I use the one I got with my tower. While no device is perfect for everyone, the iDock-C10 has been a solid addition to my setup and has streamlined my workflow significantly. It’s definitely worth considering if you’re looking for a reliable KVM switch for a mixed Mac and Windows environment. For me it's been a five-star experience, and a real relief to have found something that does what I need without a lot of consternation. Would get again.

It works perfectly. Exactly as described, fast switching between my usb-c laptop and my "legacy" connection desktop with two monitors.

Edit: Going to elaborate a little more on the product. I'm still keeping my below review even though it's not great, I was just excited I figured it out. If you're computer don't need to exceed 60hz, just plug and play. If you are like me, I have a 240 hz OLED ASUS gaming monitor and generic dell for my two monitors. My desktop is a high end gaming PC. Plug and play just like the above, however, in order to use your 240hz while gaming, you need to also utilize the 3rd DP port on the monitor that will plug directly from the 3rd DP on your desktop to the 1st DP port on the monitor. I only use one monitor when I'm gaming. If you go into setting, you can find the fake 1st and 2nd monitor that your desktop is picking up and disconnect them. This will allow you to start up your PC through the DP port (to use your 240Hz). When you switch to your laptop, it will pick up the KVM docking station ports. This is how I'm about to use this KVM switch to switch between work and gaming while still being able to utilize my 240hz monitor, even though this particular docking station goes up to 60hz. Hope this helps any of you nerds reading this. Enjoy. Original Review below: This might get buried with the other reviews, but listen up! I have a Thinkkpad work laptop and legion gaming computer. I bought and returned three others before settling on this guy. It was what you need. Easy to set up and works as advertised. Plug in the applicable cables. You need to make sure your desktop graphics card has at least one HDMI, as the other slots are for 8K. The box remembers how you like your dual monitor preferences, I turn off my second monitor on my desktop and keep it on for my laptop, no issues switching. It takes a second or so to switch over, but does so with ease. Each port transfers over seamlessly. It charges your laptop and has the ethernet port for it. The only thing is that the ethernet port is for the laptop only! I fixed this by purchasing a $15 ethernet switch. It is a little more expensive than others, but worth it.

I have two laptops (HP and Lenovo) and one desktop (Linux). I use a Viewsonic 32" monitor as external monitor. I don't have space for extra monitors. So I purchased this KVM switch, which I have been using for three and half months. It does not support hot switch for me. This means, when both a laptop and a desktop are plugged in and turned on, if I press the switch button, this monitor will "switch" but is often flickering, sometimes just blank. Occasionally, it works as expected. Switching from a laptop to desktop works, almost always. But most times hot switch from desktop to laptop does not work, with various possible behaviors: flickering screen is most often. sometimes the screen size is not correct (smaller with black filled the rest region of the monitor), sometimes just a white noise screen, sometimes a frozen picture. And sometimes the ethernet does not work after the switch. The worst inconvenience is some weird problem occasionally (average once a day), even though when I did not switch. I was using only my HP laptop with double screens (one external monitor connected through the switch, and the laptop's native screen). The external monitor suddenly went blank with all GUI moved to the laptop native monitor, with an alarming sound. Then after three seconds, everything went back to the way it should be. Initially I thought it was due to some other reasons. Now I am confirmed that this switch is the culprit since I only see this when I use this switch -- I have three docking stations and never experienced such a problem when connect external monitor using a docking station. However, if you don't do hot switch, it work fine (except as described above -- the sudden blank screen for a few seconds before things resume to normal) This mean, if I want to "switch" from desk top to laptop, I need to power off the desktop first. Press the switch button. Then power on the laptop. It is not convenient. But it solves my issue on limited space. I don't see its competitors. So the price is high (comparing with many cheap docking stations, yet with fairly good quality, available at Amazon). But I did not have another option if I want to have laptop (USB type C connector) and a desktop (HDMI or DP). Hope some switch manufacturers see my review and enter into this market :) --------------------------- Added comments after the above initial review ----------- I purchased the switch in April 2024. I wrote the initial review after several months of use. I got a message from the manufacturer who would like to understand more. I provided the debug info on my two laptops and one PC. Later I got a newer version of the switch with comments from the manufacturer that the newer version might fix my problems. Now I have used the new version for a couple of months and would like to provide some updates. I initially gave 3 stars. Now I would upgrade to 4 stars. Many weird issues are indeed gone. However, "hot" switch can be still a problem. I have used the switch for 2 PCs (one Windows 10 and one Linux) and 2 laptops (both Windows 11). I saw "grey" screens occasionally. I also saw unresponsive screens (both PC side and laptop side). It happens maybe 20% percent of time. Furthermore, the newer version of the switch is less "damaging". I had to power off both PC and laptop sometimes using the old switch since neither was responsive. But for the newer version, I experienced much less (still I had to power off to solve the "freeze" issue very occasionally). Here are some lessons I learned: 1. Keep the laptop open. This may make the chance of failed switch less frequent. Earlier I usually closed the laptop since my laptop screen is small and I would just use the external monitor. But now I realized this might make the switch not functioning well. 2. On the laptop, configure the display to see the laptop monitor as the "primary screen". This seems to improve the chance of switch functioning. Since the problems happen at random, I cannot say the above conclusion are the result of "scientific" tests. They are just my impression after months of use. In summary, if you use the switch as a "cold" switch, this product works perfect. But for "hot" switch, it is not that stable, but usable. I once talked with someone who knows this area and learned that with so many kinds of PCs and laptops, making a switch work is a hard business. I think I should give at least 4 stars to be fair.