スポンサー広告 - BENFEI DisplayPort（ディスプレイポート） - HDMI 変換ケーブル、最大4K＠30Hzまでの解像度に対応（オスからメス、逆方向に非対応)

DP3ポートとHDMI1ポートしかないGPUを使ってて、もう1枚モニターを増やしたくなり、昔使ってたHDMIまでしか付いてないモニターを持ってた事を思い出し購入。 繋いでみたけど普通に使えます。安く済んだので助かりました。 耐久性はまだわかりませんが、この価格で使えるならOKかと思い☆5で

【良かった点・気に入ったこと】 - 低価格でしっかり機能する!(^^)! - 特にPCとモニターの接続が簡単で、ストレスフリー(^^ゞ - 注文から迅速に届いて便利だった(*'ω｀) 【注意点】 - 4K対応でも30Hz制限があるので、60Hzで使いたい場合は別のケーブルが必要( ..)φメモメモ - 逆方向には対応していないので、用途によっては使えない場合がある('ω') 【使った感じ】 - 問題なく使えて、コスパ最高で満足(*'ω｀) - 安価ながら高機能で、満足度が高い(*_*)

今までHDMIケーブルしか使ったことがなくパソコンがdisplay portになったので モニターのHMDIからパソコンのdisplay portまでをつなぐのに今まで使っていた HDMIケーブルのパソコン側にこの商品を噛ませました。高級感があってちゃんと動作しております。発送も迅速な対応でした。

良く読めばよかったのですが、一方通行です。使いたい用途には使えませんでした。

サブモニターを接続するのに使っています。メインモニターでHDMI端子1つ使っていてあと1つDP端子が有るのですがサブモニターの附属品はHDMIケーブルだけだったので安価な変換ケーブルを探していました。 映像も音声も問題なく使えています。

2017年に購入。今だに無事に使用していいます。業者が持ち込んだ（型落ち？）サーバーPCにはHDMIが装備されていなく、Display portが2個も＜？＞とか不思議すぎる。ただ、この変換ケーブルで何ら問題無く使っています。

以前使用していた古いディスプレイでマルチディスプレイ化を考えたがよく見るとパソコン側のサブ出力端子はDP一つだったのでこの変換ケーブルを購入 ディスプレイの入力端子がDVI端子のためこのままでは接続出来ず今度はHDMI →DVI 端子を買い足すことになりましたが無事、マルチディスプレイ化出来ました 変換ケーブルの連結となった為、心配でしたが現在も使用していることから評点は星4としました

出っ張りも最小限で、HDMI装備のPCでない方も納得いく型だと思います。

They work great. Good value for the money.

ممتااااز

جيد جدا

The review: The adapter seems to be made well. It was in a plastic bag rather than a box, but it did have a protective cap on the male DisplayPort end, and a plastic wrap on the housing of the HDMI end. It plugged in solidly, and I tested the release with no issues. I wonder if some of the people who had issues with it breaking off when trying to remove didn't realize that DP has an active retention mechanism that has to be depressed to remove. Seamlessly transferred both video to my TV and audio to my surround sound, as expected (or at least hoped). I always like to put my personal experience in my reviews too because I search questions and reviews for information, so I feel like this can help others: Active versus passive adapters: I'm using a Lenovo M83 Tiny PC as my home theater PC, which has a DisplayPort++ output. As others have stated, this is a passive adapter and MAY not work with your output unless it is labeled DP++. The DP++ stands for "DisplayPort Dual-Mode", and simply means that the port automatically recognizes if an HDMI or DVI adapter is attached, and sends the appropriate signals rather than the DP signals. Now it is important to realize that most modern DP ports are dual mode, whether the DP++ logo is present or not. As such, you should do the research before hand to find out if your device has a dual mode port, or risk finding out the hard way. Audio through adapter: My primary concern with this adapter was whether or not it would carry audio from the DP to the HDMI cable going into my surround sound receiver. To clarify, my setup is, PC Display Port > this adapter > HDMI cable > Receiver > HDMI cable > TV. When I initially booted the computer (first boot after installing Windows 10 Pro), Windows immediately displayed video on my TV, however no sound was playing on the surround sound speakers (I was clicking the Windows volume slider and listening for the "ding"). Through Control Panel (not the garbage Windows 10 Settings app, what was wrong with the Control Panel, Microsoft?!), I went into the Sounds options. Under playback devices, there was only one item listed, "Speakers". However, almost immediately while I was in the sound options, another device showed up with the name being the model number of my receiver. Windows automatically set it as the default device. I went ahead and disabled the other "Speakers" device just to be safe. After rebooting, all settings remained and sound continued to work properly. If you are using a surround sound receiver, you should also click on the playback device and select Configure. In here, I was able to specify that I have 5.1 surround, but there were also other options such as stereo and 7.1, so make sure you pick the right one. If you are running this directly into a TV, stereo is the default setting, which is what you want. It does send a test sound to each speaker individually, so I was able to verify that the 5.1 signal was actually making it through the adapter. Now whether this is an uncompressed PCM signal or some sort of compressed audio stream is yet to be determined; but this may depend on the source media/application that is providing the audio. Edit from future me: This does support 4K as well. I saw somebody else say it doesn't, but they must be having issues with other parts of their system (source, or receiver not supporting 4K passthrough, etc.). I have slightly changed my setup listed above, and am now running the HDMI cable directly to the TV. I upgraded to a 4K TV, but my receiver does not have 4K passthrough, so I had to bypass it. Now the HDMI cable plugged into this adapter runs to the TV, carrying both video and audio to the TV. TV is receiving 4K from the PC, no problem. I can listen to the sound through the TV speakers, but I don't as I am using a TOSLINK cable to carry the sound back to the receiver. I need to upgrade my receiver to one with 4K passthrough and audio return channel to simplify my life but that costs money and would only potentially reduce the number of cables I need by one. However, I already have to return audio from the TV to the receiver via TOSLINK because I want the TV app audio to come through my surround sound speakers too, so in the end it's all the same.

Very good product. Working well. I had procured one from local shop for the same price, but it did not work. This is a good item