Spigen EZ Fit [2 Pack] Screen Protector for Samsung Galaxy Z Flip 8/ Z Flip 7

I previously bought 2 other screen protector kits from amazon but for various reasons, such as being too big and not fitting with a case or trouble installing without getting dust in, they were replaced eventually with this one. At £17.99, it is definitely a lot more expensive than the vast majority of protectors on Amazon but when you've already bought and are now trying to protect one of the most expensive phones available, it is worth every penny. You get two screen protectors in the pack, both of which are encased in an alignment frame, along with a few wipes and dust removal stickers. So simple to use, all you have to do is first give the phone a wipe with the included wipes. Ensure the alignment frame with the included screen protector is facing down to minimise dust and take off the protective film and apply to the phone. Once this has been done you simply swipe back and forth on the directed section of the protector and leave it for 30 seconds. After this point, you can lift up the alignment frame from the phone and then take off the protective film from the top of the screen protector and you're all done. My instructions probably make it sound more complicated than it is, but I promise it is the easiest and pain free solution to applying a screen protector I've ever had, it's that easy. The application of the screen protector fits perfectly to the section of the actual usable screen rather than anything outside, so 99% of cases should work without any issues. I use the official galaxy fold 5 s pen case and its perfect with this. Don't bother with any other screen protector, get this for a quick, no fault and pain free screen protector instalation solution.

Excellent and very easy to apply. This is the first time that I have ever applied a screen protector without dust or bubbles underneath! It is pricey, but the Fold 7 isn't a cheap device, and it's worth it to get such a form-fitting protector!

I don't typically bother with a screen protector as they don't do much to stop you from smashing the main screen and I don't mind the micro scratches over the life of the phone, combined with the fact that screen protectors are difficult to apply perfectly and without bubbles/dust being trapped. The applicators that come with these screen protectors make that process an absolute breeze; its so easy to align them and apply the protector perfectly. To expand even further, I specifically wanted to try an idea with a glass screen protector, because with the Z Fold 5 (and I assume any folding phone), there is no decent was of keeping the front part of the case attached, and the thin bit of plastic that runs down the front next to the hinge is always so flimsy and bends a lot, causing the case to degrade over time and slide around on the front. But with a glass screen protector applied that has some depth to it, this completely negates any movement of that front case section and keeps it all basically locked in place. So in all, I recommend this kit because it is functional, easy to apply, super clear, feels very smooth, and actually assists in keeping the front case attached to the folding line of phones.

I have used a variety of brands of the years and keep coming back to spiegen for their great quality and durability. They always hold well don't scratch easily and keep the phone well protected. They are easy to install but I had to drop one star as installed the screen protector as per the instructions pushed out any air bubbles and it looked perfect. 2 hours later the edges peeled up slightly and now have a tiny area that won't stick down. Yes you get two in a box but it is disappointing when they are so expensive.

Flawless Application & Genuine Tempered Glass Quality Pros: Stress-Free Installation: It is incredibly easy to apply, going on smoothly without the usual struggle against trapped dust or bubbles. Real Tempered Glass: It’s proper tempered glass, which feels premium to the touch and doesn't degrade the clarity of the screen. High-Level Protection: It feels very substantial and protective, giving me great peace of mind against drops and scratches. Excellent Value for Money: Given the high quality of the glass and the inclusion of the application kit, the value is fantastic. 0 fingerprint marks or smudges. it must have some sort of wizard coating to stop these marks, it is incredible. Cons: Slightly smaller than the display, although this is made for cases, so it does make sense, it's just when you are applying it feels much smaller than the phone! The Breakdown: Applying screen protectors can usually be a nerve-wracking process, but this one was surprisingly easy to install. The alignment was straightforward, and it adhered perfectly to the phone screen without leaving annoying air bubbles underneath. The quality of the glass itself is excellent. It’s genuine tempered glass, so it maintains the original touch sensitivity of the phone while feeling thick enough to offer serious protection. I am genuinely very happy with both the overall build quality and the value this kit provides. Final Verdict: If you dread putting screen protectors on, this kit makes the application process a breeze. It offers brilliant protection, great value, and premium glass quality. Highly recommended!

Having spent an insane amount of money on the Z Fold 5 i wanted to at least give the screen some protection. Having used SPIGEN products/screen protectors on other phones I have been happy with previous result. The new installation system is SOOOOOOO easy to use. The screen protector come preloaded in a plastic container. Clean the screen with the included wipes and cloth and peel the screen protector cover. Immediatley place the screen protector/container onto the cover screen and press down and leave for a few minutes. There are NO placment issues, nor does the screen protector slide about. Remove the carrier and use the included squeegy to remove an small bubbles that may have occured if required. Peel back the outer protector and you're done! I do not have a SPIGEN case to test, but the documents say they are compatible with those. I ordered a cheaper clear TPU style case while waiting for the official samsung case to arrive and although the back piece fits fine, the front part of the case does not correctly fit near the hinge side. This creates a small bit of pressure causeing bubbling on the screen if used. If the official Samsung case does the same I may have to reconsider the protector/case decision. I'm currently running the phone with just the rear case and the Spigen Glas for protection. The product itself is 9H hardenss , easy to install protector, of which you get 2 in the box, and for the price I would definitely consider it.

What do you get? A box containing 2 tempered glass screen protectors in EZ fit plastic frames, a paper envelope containg screen wet wipes, dust removal stickers, a very small microfibre cleaning cloth, a plastic "scraper" (to help remove air bubbles) and some instructions for fitting the protectors/removing air bubbles along with Qcodes linking to install videos. I didn't really need to clean the screen or use the stickers to remove dust as my phone was brand new and I literally took off the factory fitted screen film and, after a quick check of the screen, put the protector straight on. With the phone closed you peel off a cover on the bottom of the screen protector (the side that will stick to the screen) clip the EZfit frame onto the phone, press where it tells you (literally says it on a sticker), remove that sticker, remove the frame and that's it, I had one or two very small air bubbles that cleared easily using the plastic scraper. It fitted perfectly with no effect on display quality or colour. Like all tempered glass protectors it is silky smooth when using the touch screen. Is it the cheapest? Well...no but you do get 2 protectors and they are very easy to fit so for me it's money well spent. Update:- 3 Months in and not a mark on the screen protector let alone the screen itself.

I bought this for my Z Fold 7 knowing that Spigen was a reputable brand and their cases for the Fold 7 were highly recommended. I used a non-spiegen case at first, and on the 2nd day, whilst affixing the multi-part case to the phone, the case managed to crack the screen protector in 2 places. This was done whilst gently sliding the plastic piece to the front cover screen. "No matter", I thought. They thankfully provide a spare, and I had just bought a Spigen case to go with it. It fits very well with the case (Slim Armour Pro) however today at work, the screen protector has once again cracked which has been a result of wired charging in the car. With my iPhone I used before this phone, I used a DBrand screen protector which was fantastic, and this is far below the standard I expected of the brand.

Très bien

Perfect fit, lasts really long and best part is , it gives a new look for months. Smudge free. Love it. Felt it was slightly expensive but quality is very superior . The cheaper alternatives dont come anywhere close to this product. Buy this once and youre literally covered till you want to upgrade your handset altogether.

Fácil de usar y con instrucciones claras que permiten colocar muy fácil y rápido la carcasa

リピート購入。今回自分のミスでフィルムにヒビが入り。 中華製の安物でいい人には分からないと思いますがこのクオリティであれば全然高くないです。 大事なスマホの画面をしっかりと守ってくれる安心感そして貼りやすさ。 色々なフィルムを試してきました、自分のミスでフィルムを傷つけない限り交換の必要はないと思います。 さすがの品物です。

Excellent product, very easy to install after seeing the video. Value for money, touch sensitivity not affected even 1%.Order blindly for Zfold5