INJORA MB100-R80 20A つや消しミニESC 1/24 1/18 RCクローラーアップグレード用

I have two SCX24s and an older Panda Hobby Dodge, slow speed control was not good and the escs whined, real bad, especially the Panda Hobby esc. I was thinking of getting rid of the trucks, I have a bunch of 1/18th rigs, but instead found out about this inexpensive drop in replacement esc where you can keep the stock radios and receivers. I didn't want to drop a bunch of money on these rigs replacing so much. The MB100 works well, slow speed control is much better, and it is as quiet as a mouse. Hooking it up is very straight forward, plug your motor into the MB100 esc, plug the supplied cable from the MB100 to the stock esc/receiver channel 2, and finally plug your battery into the MB100 and you are good to go! If nothing works, check to make sure the plugs to and from channel 2 are in the right orientation. The only problem with the MB100 is where to put all of the electronics!!!!!! If you have a SCX24 buy the Injora aluminum side plate at the same time, you can mount the MB100 and battery on the plate or move things around as you wish. Without the side plate, I have electronics high up in the C10 cab, doesn't look cool and throws the weight balance off. Edit: This ESC has breathed new life into my SCX24s, the slow speed control with stock motor is actually really good, it has made it a pleasure to drive these rigs once again. The side plates did not help with placing the electronics in the C10, the MB100 would still not fit with plugs that stick out. To make the esc fit, I trimmed off the forward lip of the battery tray and placed Velcro in the tray. I then mounted the esc as for forward as possible with Velcro and mount the battery side ways, 90 degrees from the original orientation with Velcro also. I am sure it has slightly worse weight distribution now, but it is not obvious and it is worth if for the slow speed control. If you don't want to spend a bunch of money, but want to improve your SCX24 low speed control while using the stock transmitter and radio, get this esc. It is well worth it, I can't praise it enough.

Una gran mejora sin duda, mucho mejor tacto para escalar. Junto con los engranajes 40 3/1 de acero y el motor 180 48T genial para escalar con el Traxxas TRX4M

Does not work with later model scx24. No channel 2 on original ESCs and the instructions are very vague and not clear that come with it

Had an issue with my unit, contacted injora directly via their support team and they sent me a new one, great customer service, very friendly. The new unit worked without a fault, no whine from the esc, good quality.

Very good quality, no issues, no problems. I would definitely buy again.