
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Croatia.
🛠️ Fix it like a pro, fast and fierce!
The Fernco Fiberglass Repair Kit (3" x 11 ft.) is a high-performance pipe repair solution designed for pipes 1-1/4" to 3" in diameter. Engineered to endure up to 425°F and pressures of 600 psi, it delivers exceptional tensile (24,000 psi), compression (26,600 psi), and flexural strength (16,100 psi). This all-in-one kit includes fiberglass wrap, epoxy putty, gloves, and instructions, enabling a durable, quick-curing (30 min) repair trusted by professionals and DIYers alike. Manufactured in the USA to EPA601 and AS4020 standards, it’s the go-to choice for lasting, industrial-grade pipe repairs.

| ASIN | B000JD6JVM |
| Best Sellers Rank | #246,652 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #221 in Adhesive Transfer Tape |
| Brand | Fernco |
| Brand Name | Fernco |
| Color | Gray |
| Compatible Material | Fiberglass |
| Container Type | Pouch |
| Customer Reviews | 4.3 out of 5 stars 395 Reviews |
| Full Cure Time | 30 minutes |
| Global Trade Identification Number | 00018578008649, 00732233470236 |
| Included Components | Unit^Instruction Guide |
| Item Form | Putty |
| Item Package Quantity | 1 |
| Item Type Name | FERNCO FPW3132CS Pipe Repair Kit |
| Item Weight | 6.4 ounces |
| Manufacturer | Fernco Inc. |
| Material | Fiberglass |
| Material Type | Fiberglass |
| Model | FPW3132CS |
| Number of Pieces | 3 |
| Other Special Features of the Product | Fiberglass-specific repair kit |
| Part Number | FPW3132CS |
| Special Feature | Fiberglass-specific repair kit |
| Specific Uses For Product | Repair |
| Tensile Strength | 24000 psi |
| UPC | 732233470236 784497958784 752913169946 018578008649 |
| Unit Count | 7.19 Ounce |
| Viscosity Level | Medium to High |
| Water Resistance Level | Not Water Resistant |
A**R
Perfect for repairing a leaking Iron drain pipe
I did a lot of research before using this type of pipe repair system, and I believe my research paid off and accounts for the success that I had with repairing a leak at a joint of an iron drain pipe. The first two photos show the repaired pipe. The last two photos show the pipe section after I removed the rust and corrosion with a wire brush attached to a drill and stripped the paint off the area that was corroded. These are the steps that I took: 1) I used a drill and a dremel with a wire brush to clean and grind off rust and any loose corrosion. 2) I used Citristrip to remove the paint on the pipe 3" below and above the area to be repaired. 3) I wiped down the repair area with mineral spirits. 4) I applied 3M Primer 94 to the area where the epoxy and fiberglass wrap will be applied. 5) I mixed the epoxy putty together until completely mixed to a uniform color. 6) I applied the mixed epoxy putty to the area of the pipe that was leaking. 7) I soaked the fiberglass wrap in water for 45 seconds. 8) I wrapped the fiberglass around the repair area 3" above and below the actual location of the leak. 9) I continued wringing the wrap around the pipe with my hands for10 minutes until it hardened. The epoxy and fiberglass wrap hardened like concrete and stopped any water from leaking out. Here are my suggestions: 1) Don't use the thin gloves that come with the kit. They'll never last the duration of the job. I bought cheap dishwashing gloves and they held up from start to finish with no problem. 2) Make sure to clean the area to be repaired with a power tool (drill with wire brush, dremel, sander, etc). I also used paint stripper since the drain pipe was painted with several coats of paint. You want to get down to clean bare metal so that the epoxy and fiberglass wrap adhere properly. 3) I used an adhesion promoter (3M Primer 94) on the clean bare metal before I applied the epoxy and fiberglass wrap just to ensure the best adhesion possible. 4) I bought epoxy putty in addition to what came with the kit since I wanted to apply the epoxy around the entire pipe where it threaded into the joint. If I had wanted to put the epoxy on only the threaded area that was leaking, then the amount that came with the kit would have been enough. To help more easily mix the putty since I was using three times the amount that came with the kit, I cut the putty roll length wise and then twisted the two strips together before working it together with my hands. 5) I did not add water to the bag that the fiberglass wrap comes in like the instructions suggest. I filled a bucket with water, took the wrap out of the bag, and then soaked the wrap in the bucket of water. Using a bucket allowed me to easily and completely saturate the wrap material with my hands in the water and this also greatly reduced the mess. There is just not enough room in the bag for your hands to reach in and knead the wrap in the water. I kneaded and soaked the wrap for 45 seconds. 6) Once you have all the material wrapped around the pipe, you MUST keep wringing the wrap for at least 10 minutes in the same direction that it was originally wrapped. This will prevent the wrap from swelling and pulling away from the pipe. You'll be able to tell when the wrap has hardened enough so that it will not swell and separate from the pipe. This is kind of a P.I.A. but absolutely necessary. When the material begins to harden, the paste gets very sticky and your gloves will start to stick to the material making it difficult to keep wringing the wrap around the pipe. When it got to this point (probably after 5 minutes) I used parchment paper between my gloves and the wrap which allowed me to keep wringing the wrap for an additional 5 minutes. After 10 minutes, the wrap setup and the material no longer wanted to swell or pull away from itself or the pipe. I am very happy with the repair. Some say that this type of repair is a temporary fix. I believe that the repair I did is permanent and will outlast the life of the pipe.
A**H
Works if You Follow Directions.
Washing dishes one day, felt water, looked under the sink, and there was a nickle size hole corroded in the old chrome pipe. Needed something to temporarily fix it until I could get someone out, because we had 3 feet of snow. Started researching and saw this. Read the reviews and also saw how to apply on YouTube. While skeptical, I ordered it, and when it came-- I read the instructions three times, and reviewed the application video again. I will say that instead of the putty they provided with the kit, I used another popular brand that I purchased on here as well. This kit is messy as all get out. Make sure you get some good gloves as other reviewers have suggested, cause I got some of the epoxy on my wrists and it took me a while to get it off! (Used vaseline to rub it off). I sanded the pipe and around the hole with a 3M sanding sponge, before I applied the putty and tape, and also used a degreaser cleaner to clean the pipe as instructed. I made sure to wrap the tape around the pipe tightly as I went along, also squeezing, smoothing and tightening the tape in place as I went along, as well as on the ends to seal the tape to the pipe. After I placed all the tape in place-- I made sure to squeeze, smooth and tighten the tape, and let it dry for about three hours. I checked by touching/feeling around it before I turned the water on and VOILA! This thing is adhered, and hard as steel! Have washed dishes, etc., and still no leaks! (If things change, I'll let y'all know,)
B**S
Product does exactly what I needed it to do!
Had a large leak in a well pump pipe, so the water pressure was surging continually and the pump was continuously cycling. Pump was not readily accessible, and the leak was right where the pipe entered the elbow. It was very tight to wrap all the tape around the pipe and the elbow, but the product performed perfectly. Wow, after it cured in 15 minutes or so, it was clear that no water was ever going to leak from that location again. Great was to spend $20 bucks and 20 minutes, and save many hours and/or plumber's charge. One tip. Put on a pair of tight fitting rubber gloves, and then put on the gloves included in the kit over those. It will be a much better experience.
D**9
Repaired very old 2" iron irrigation pipe
Product worked great, and was very easy to apply. Some reviews complain about being difficult, I don't understand what's difficult about applying. I had a very difficult repair as the pipe was cracked nearly all the way through, on the inside of a tee. This was also a very old 2" iron irrigation pipe. While making the repair I was unable to shut the water off completely, as my upstream shut off value did not completely shut the water supply off. This meant I had a slow leak at the pipe while making the repair. The instructions mentions what to do in the event you have a water leak while making the repair. One thing to note, after making the repair it states ready to use within 30 minutes, I waited 1 hour. I then turned water supply on and noticed I had a small leak coming from the repair, this left me very discouraged. I decided to turn the water supply off again and let the repair sit over night. After 24 hours the water supply was turned back on and bingo, no leak. The pipe has sat under pressure now for two weeks without a single drop or leak. Had I needed to repair/replace this section of pipe would have been a night mare, time consuming, and a costly one at that. Well worth the $18, and 30 minutes of work to apply from start to ending. My advise would be to read the instructions multiple times before starting. If you can afford it, give the repair more time to setup before turning your water supply back on. Prep your pipe before making the repair. I took a grinder to my pipe to ensure the pipe was clean, and down to bare metal. Only time will tell if this repair holds, I cannot speak to its longevity...crossing fingers!
B**D
This stuff is all it is advertised to be!
Saved hundred$$$ on a near-impossible repair on an ancient cast iron sewer pipe--was nearly rusted through and leaking whenever the washer (in basement) was draining. Repair was made over 3 years ago, and not a trace of a leak! This product seems to bond even stronger than the original pipe. A word of caution: This compound is difficult to work with--especially for a novice. I strongly recommend reading the instructions--several times--before beginning the repair. Make sure that you have everything close at hand prior to mixing and wrapping, as this process is hardly forgiving of error. The compound is very messy (sloppy) to apply, and wearing a decent pair of latex gloves is a must. But once you've persevered, and the job is well done, you will be proud of your achievement, not to mention the savings from hiring a plumber. In my case, calling someone in to work with the old cast iron/lead joint pipe would have been pretty expensive. Photos: 1) ancient cast iron drain pipe, rusted out, leaking like a sieve; 2; pipe repair with Fernco Pow-R Wrap (still a little wet). Note: repair made 4 or 5 years ago; no leaks, not even a drop--harder than the pipe itself!
D**E
Works, but VERY difficult to use, must work quickly
I decided to try this product for a repair on some old work: a failing soldered connection between a 2" lead drain pipe and a brass cleanout trap for a bathtub. To be fair, effective use of this product in my situation was hindered by its location beneath the floor in the back of a narrow closet behind the tub, between two floor joists. The included putty was useful to cover a pencil-sized hole in the pipe, this was simple and similar to other putty products I've used. Due to clearance issues, however, it was impossible to wrap the entire roll of sticky fabric tape around the pipe concentrically as per the instructions. I had to cut sections about 12-14" long and repeatedly apply them - very difficult once the clock is ticking on the wet epoxy. It soon became far too sticky and I had to give up after only a few wraps instead of the ten or more layers recommended. To reiterate, this product was ABSOLUTELY NOT EASY TO WORK WITH in tight quarters, setting off a stream of expletives worthy of Old Man Parker. The leak does appear to have been stopped, and I expect this repair will remain effective at least a year or two until plans to renovate the entire bathroom are realized.
A**I
It works....even on my insanely difficult repair!
This product works! I live in a 55 year old house, where the previous owners did absolutely nothing to up-keep it. This leak obviously occurred for many years without even an attempt to fix it. This leak was bad too. It was part of drain pipe from tub/shower. Where the pipe met with another pipe the threaded part had so much mineral built up and corrosion around it. I chipped away at it, and part of the threaded area of the pipe ripped off with the mineral build up. Let me also mention I was reaching deep down into the wall where the pipes were and it was below floor level. REALLY REALLY hard to reach and could barely see what I was doing, not a lot of room. I considered calling a plumber but I knew it would cost hundreds and become a gigantic project of replacing this that and god knows what else. So I decided to put faith in myself and do my best. I researched and tried everything from liquid rubber sprays, silicone wraps, to finally the fiberglass wrap. I was at my wits end with this leak and was tired of seeing it drip into my garage, since its the only shower in the house I was stuck continuing to use it. So tonight I finally used my Power R Wrap and yes it was pretty difficult to use. I had to cut the wrap into sections, apply them one at a time. All the while barely seeing what I'm doing my fingers were my eyes honestly. Well, I got it done, let it sit for an hour and went back to check on it. Its hard as a rock. So I held my breath and turned on the water.....no leak!!!!!!!!! I am ecstatic! I left the water run for 20 mins just staring down into wall with a flash light, I felt it all over with my hands, no water, also no more dripping into the garage. I am so relieved and happy. By the way, all the reviews saying how messy it was. Yes its super messy, but nothing you can't handle. Get a few pairs of gloves, I went through 3 pairs just because they get so gooped up you need new ones, so I wore 2 pair at a time. No it doesn't eat through the gloves. I had the most challenging area to fix and I did it without swearing once. If I can do this you can do this. A lot of the men on these reviews were pretty dramatic about it, but its really not that bad, in all actuality it was for the most part easy. Just get your supplies together, have your plan, and get to it. It works!!! I will try to remember to give an update in a few months to see how its holding up. Also, I don't plan on living in this house for a long time, therefore I don't care about replacing pipes. I just wanted a quick fix to last a year or two. I believe this is it. UPDATE: 8 months later....still no more leaking! It is a permanent fix, I swear. Yay!
S**M
Leaked
I followed instructions as per packet, I even had a clock ( you will not be able to see a watch on your wrist once the gloves are on!) to time myself on the various steps. I left the tape to dry more than double the time specified, the water still leaked through. I was using it on 1/2" bore pvc pipe, PVC pipe was among pipe instructions said it would cure leak.. Also for those who are still going to use it, my job was above my head, if your job is similar, wear goggles! As other people have said, it really is gooey and drips everywhere. I suggest wearing overalls or some old cloths you are willing to throw away. I wore long washing up gloves, the goo dripped past the end of the gloves. I had to throw them away after. Another thing, as I knew once the gloves were covered in goo, I would not be able to re read the instructions. I taped the instructions to the wall where I was working.
J**8
but worked great. Some light leakage at first
Very very very messy to apply, but worked great. Some light leakage at first, which disappeared in a few days.
W**S
need to turn off water, for it to work ...
need to turn off water, for it to work, even a slight drip will stop the putty from curing in a sealing kind of way. It will work submerged in water, but remember to turn off water at mains.
R**S
messy but effective solution
Llegó dentro del marco de tiempo especificado. El producto fue como se describe y se empaquetó satisfactoriamente. Es un poco complicado aplicarlo especialmente cuando se trata de un área de difícil acceso. El resultado final fue muy efectivo.
M**N
... HAVING SOME YEARS AGO QUITE SIMPLY SOME OF THE BEST STUFF YOU LL EVER USE
FOUND AGAIN AFTER HAVING SOME YEARS AGO QUITE SIMPLY SOME OF THE BEST STUFF YOU LL EVER USE !!!
D**.
Five Stars
Fast delivery, very pleased
Trustpilot
1 week ago
1 month ago