Signature Elite ES12 Subwoofer (Black) 12" Long Range Woofer with Mineral Filled Polymer Cone, 300W Class D Amplifier, Front Shot Home Subwoofer,

This ES12 sub rocks. Is matched with legacy Polk RTA-11 front towers, Polk R400 center, Polk ES20 surrounds. All large big sound speakers for their placement. Lots of big sound all around.

Reference Onkyo RZ30 receiver The answer to the issue: goto receiver setup Determining the fault: The subwoofer produces no sound Check the test tone You can determine whether there is a fault by checking the test tone. Use the following procedure to play the test tone: 1. Turn off external devices (TV, DVD player, etc.) and turn on this unit only. After turning on, wait for about 30 seconds until the system turns on completely. 2. Turn on the power of the subwoofer. • If the subwoofer has a volume control, increase the volume slightly. 3. Press mceclip2.pngSETUP on the remote controller, then select "Speaker" - "Level Calibration". A test tone is played from the left front speaker after a moment. 4. Press the DOWN cursor several times to select "Subwoofer" and check if the test tone is played from the subwoofer. – There is no test tone After turning it off, unplug the subwoofer cable, then plug it in again. If there is still no sound after plugging the cable in again, there is probably a fault with either this unit or the subwoofer. – There is a test tone The following causes are possible: • A subwoofer element (LFE) is not included in the input signal. • The front speakers are set to "Full Band". When set to "Full Band", then during 2ch input such as from the TV or music, the low range elements will be output from the front speakers rather than from the subwoofer. To output the sound from the subwoofer, make one of the following settings. 1. Change the setting for the front speakers to a setting of crossover frequency value other than “Full Band”. The range below the specified frequency will be output from the subwoofer instead of from the front speakers. If your front speakers have a high low range reproduction capability, changing this setting is not recommended. 2. Change “Double Bass” to “On”. The low range elements of the front speakers will be output from both the front speakers and the subwoofer. Due to this, the bass sound may be emphasized too much. In such a case, do not change the setting, or make the setting with the above option 1. For the setting details, refer to “Speaker” - “Crossover” on the Setup menu.

Been awhile since I purchased a subwoofer. Prime day offer helped make the decision to purchase. This sub is a tank. Well built, many options for setting the frequency, and has auto on feature. It provides deep tight bass

​Después de poner a prueba este subwoofer de 12 pulgadas de Polk Audio, puedo decir que es una compra excepcional para quienes buscamos calidad y durabilidad. ​Desde el primer momento en que lo conecté, quedó claro que no es un equipo convencional. La potencia que despliega es impresionante: cuando subes el volumen, el bajo no solo se escucha, se siente en cada rincón. Es capaz de hacer que toda la casa retumbe con una contundencia que realmente impresiona. ​A pesar de que sigo explorando sus límites y ajustando la configuración para encontrar el punto óptimo, su rendimiento hasta ahora ha sido impecable. Si buscas un equipo que transmita fuerza, precisión y que realmente se haga notar, este Polk Audio es una verdadera bestia. Totalmente recomendado para quienes valoran un sonido sólido y de alta calidad

Movie theater feel, and club bumping sound.